Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 849-868 av 1689
-
Investigation of critical time and temperature for pitting corrosion on 316SS cladding
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-30)The austenitic stainless steel 316L is a very common and low carbon stainless steel grade. 316L has great corrosion characteristics under harsh conditions such as seawater, acidic medias etc. The presence of molybdenum ... -
Investigation of Influence of Adjustments in Cyclist Arm Position on Aerodynamic Drag Using Computational Fluid Dynamics
(Peer reviewed; Journal article, 2020-06)In professional cycling, even small adjustments in position could mean that valuable seconds are gained over the course of a time-trial race. This study investigates the influence of arm position on the aerodynamic drag ... -
Investigation of Material Property changes in HSLA Steel due to Weld Proximity
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-09-15)Standards and specifications apply a rule of thumb when determining the distance of two adjacent weld joints, but they rarely give any clear technical justification for the predetermined values. It is vital to understand ... -
Investigation of materials which reduce CO2 in long term.
(Bachelor thesis, 2021)About one quarter of global energy use is for production of materials. The more efficient we are in the use of these materials, the better it is for the long-term reduction of CO2 and other GHG emissions. Concrete is the ... -
Investigation of mechanical properties of false banana/glass fiber reinforced hybrid composite materials
(Peer reviewed; Journal article, 2020)The objective of the work presented in this article is to investigate the mechanical properties of false banana/glass fiber reinforced hybrid composite materials at different fiber volume fractions and orientation of hybrid ... -
Investigation of necessary subsea structure modifications prior to installation of new offloading system at Gullfaks
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Due to the extension of the Gullfaks license, Statoil needs to perform several upgrades to systems to satisfy today’s regulations. Today`s system consist of two large single point moored offloading buoys, SPM 1 and SPM ... -
Investigation of Rotor Efficiency with Varying Rotor Pitch Angle for a Coaxial Drone
(Peer reviewed; Journal article, 2022-04)Coaxial rotor systems are appealing for multirotor drones, as they increase thrust without increasing the vehicle’s footprint. However, the thrust of a coaxial rotor system is reduced compared to having the rotors in line. ... -
Investigation of smoothing in the actuator line model for single and multi-rotor wind turbines
(Master thesis, 2022)The state-of-the-art actuator line modeling (ALM) method has been used extensively in the past decade to perform large-eddy simulations (LES) of wind turbines as fully resolved blade simulations require complex rotating ... -
Investigation of suction anchor pullout capacity under undrained conditions
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Floating units are dependent on reliable mooring systems to ensure safety during marine operations. Suction anchors have proved to be a technologically viable and cost-effective concept. They are capable of precision ... -
An Investigation of Sustained Casing Pressure Occurring on the NCS
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-12-15)Reports from the Gulf of Mexico (GoM) show that thousands of wells exhibit sustained casing pressure (SCP), however the extent of this phenomena and its driving factors have yet to be studied in detail on the Norwegian ... -
Investigation of the corrosion properties of 316L in marine atmosphere and assessment of the effectiveness of different surface repassivation products
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018)The major purpose of this thesis was to investigate and assess what effect of repassivation product has on corrosion resistance of 316L in marine atmosphere. Additionally, compare the chemical composition with the certificate. ... -
An investigation of the effects and consequences of combining Expanding Dual Pin with radial spherical plain bearings
(Peer reviewed; Journal article, 2022)An expanding pin locks the pin assembly to its supports and bearings and prevents any relative movements between the surfaces in contact. In this study, the diameter changes of the bearing inner ring as a function of the ... -
Investigation of the mechanical properties of Acacia tortilis fiber reinforced natural composite
(Peer reviewed; Journal article, 2020-10)The work presented in this paper is motivated by the fact that use of natural fiber materials for structural and non-structural applications have increased within the last two decades. In addition to the known benefits of ... -
Investigation of transitional turbulence models for CFD simulation of the drag crisis for flow over a sphere
(Peer reviewed; Journal article, 2019)The drag crisis is an interesting physical phenomenon for flow over bluff bodies, where the drag coefficient suddenly drops as the Reynolds number increases. This behavior is caused by the flow transitioning from laminar ... -
Investigation of transitional turbulence models to predict drag crisis for flow over spheres and cylinder
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-14)The current work performed experimental and numerical studies of flow over cylinders and spheres. The purpose is to investigate whether the drag crisis phenomenon can be predicted, and to gain insight into the transition ... -
Investigation of updating methods for probability-informed inspection planning for offshore structures
(Peer reviewed; Journal article, 2019)The paper presents a novel process for probability-informed inspection planning based on the following principles. 1) A description of the strength of knowledge about a problem shall be included and be accounted for in the ... -
Investigation of which sea state yield the dominating contribution to fatigue accumulation in offshore structures
(Masteroppgave/UIS-HF-IKM 2014;, Master thesis, 2014-06-23)Majority of the fatigue damage on offshore structures is generally assumed to be caused by relatively frequently occurring moderate sea states, i.e. sea states with significant wave height in the range of 4m - 8m.On the ... -
Investigation on The Mechanical Properties of CO2 Cured Concrete with Natural Aggregates.
(Bachelor thesis, 2021)Betongproduksjon er en av industriene med størst CO2 utslipp i verden. En liten reduksjon i CO2 utslippene fra denne industrien kan derfor være svært gunstig for å nå klimamålene. Herding ved akselerert karbonatisering ... -
Investigation on the Mechanical Properties of Lightweight Concrete with CO2 Curing
(Master thesis, 2021) -
Investigations of Microstructure and Mechanical Properties of 17-4 Ph Ss Printed by Markforged Metal X
(Peer reviewed; Journal article, 2022-10)The Markforged Metal X (MfMX) printing machine (Markforged Inc., Massachusetts, USA) is one of the latest introduced additive manufacturing (AM) devices. It is getting popular because of its safety, simplicity, and ability ...