Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM): Nye registreringer
Viser treff 41-60 av 1687
-
Experimental and numerical investigation of residual stresses in proximity girth welds
(Peer reviewed; Journal article, 2023)International fabrication codes and standards provide minimum distance criteria for proximity welds, although rigorous justification is lacking. These distances are either based on practical experience or mutual agreement ... -
Novel methods for reliability study of multi-dimensional non-linear dynamic systems
(Peer reviewed; Journal article, 2023)This research presents two unique techniques for engineering system reliability analysis of multi-dimensional non-linear dynamic structures. First, the structural reliability technique works best for multi-dimensional ... -
Numerical study on vibratory extraction of offshore wind turbine monopile foundations under sandy seabed condition
(Peer reviewed; Journal article, 2023)The wind industry has experienced a rapid growth in Europe over the last decades. The early generation turbines were designed for a life of 20–25 years. Decommissioning of offshore wind turbines is becoming more important ... -
An Attribute Perspective on Regulatory Regimes in Risk Governance
(Peer reviewed; Journal article, 2023)Increasing interest from stakeholders has brought new focus on risk governance and risk regulation, such as the regulator’s execution of duty and tangible results on safety and environmental protection in oil and gas ... -
Numerical investigation on rock fragmentation under decoupled charge blasting
(Peer reviewed; Journal article, 2023-05)Blasting using decoupled charge is extensively applied in rock excavation and rock fragmentation. In this study, the rock fragmentation induced by blasting using decoupled charge is investigated by combined finite element ... -
Identifying innovation opportunities emerging from technology and business trends
(PhD thesis UiS;, Doctoral thesis, 2023)Businesses are continuously looking for opportunities to innovate. There is a gap in the literature regarding innovation models and approaches that are systematic, practical and easy to apply. This thesis addresses this ... -
Experimental and Numerical Study on the Slug Characteristics and Flow-Induced Vibration of a Subsea Rigid M-Shaped Jumper
(Peer reviewed; Journal article, 2023)The subsea jumper has become an essential part of subsea production systems as a gas–liquid mixing pipeline connecting the pipeline end manifold (PLEM) to the Christmas tree. During oil and gas transportation, as a common ... -
Gaidai-Xing reliability method validation for 10-MW floating wind turbines
(Peer reviewed; Journal article, 2023)In contrast to well-known bivariate statistical approach, which is known to properly forecast extreme response levels for two-dimensional systems, the research validates innovative structural reliability method, which is ... -
Application of Artificial Intelligence for Surface Roughness Prediction of Additively Manufactured Components
(Peer reviewed; Journal article, 2023)Additive manufacturing has gained significant popularity from a manufacturing perspective due to its potential for improving production efficiency. However, ensuring consistent product quality within predetermined equipment, ... -
Oil tanker under ice loadings
(Peer reviewed; Journal article, 2023)As a result of global warming, the area of the polar pack ice is diminishing, making merchant travel more practical. Even if Arctic ice thickness reduced in the summer, fractured ice is still presenting operational risks ... -
Novel methods for coupled prediction of extreme wind speeds and wave heights
(Peer reviewed; Journal article, 2023)Two novel methods are being outlined that, when combined, can be used for spatiotemporal analysis of wind speeds and wave heights, thus contributing to global climate studies. First, the authors provide a unique reliability ... -
Design and Dynamic Analysis of a Novel Subsea Shuttle Tanker
(PhD thesis UiS;, Doctoral thesis, 2023)Underwater pipelines, tanker ships, and liquefied gas carriers have traditionally been employed to transport hydrocarbons between offshore oil and gas facilities and onshore locations. However, both methods come with ... -
Offloading operation bivariate extreme response statistics for FPSO vessel
(Peer reviewed; Journal article, 2023)The Floating Production Storage and Offloading unit (FPSO) is an offshore unit producing and storing crude oil prior to tanker transport. An important design concern is an accurate prediction of risky dynamic hawser tensions ... -
Effect of Interference Size on Contact Pressure Distribution of Railway Wheel Axle Press Fitting
(Peer reviewed; Journal article, 2023)Mechanical couplings in engineering usually use interference fits to connect the shaft and hub. A railway wheel axle is a press fit that is connected by interference and can be subjected to bending stress. In loaded press ... -
Use of circular economy practices during the renovation of old buildings in developing countries
(Peer reviewed; Journal article, 2023)The construction industry is responsible for over 30% of global natural resource extraction and 25% of solid waste production, primarily due to its prevalent "take, make, dispose" economic model. Shifting toward a circular ... -
Experimental Investigation on Effect of Weight Fraction of Sisal Fiber on Mechanical Properties of Sisal-E-Glass Hybrid Polymer Composites
(Peer reviewed; Journal article, 2023)Currently, hybridizing natural fibers with synthetic fiber is considered as the best solution for reducing the environmental pollution and the cost of materials. This is due to the lower mechanical properties and high water ... -
Virtual skeleton methodology for athlete posture modification in CFD simulations
(Peer reviewed; Journal article, 2023)This study focuses on the aerodynamic influence of athlete posture in sports aerodynamics. To analyze a specific posture, wind tunnel measurements and computer simulations are commonly employed. For computer simulations, ... -
Fatigue Analysis of Inter-Array Power Cables between Two Floating Offshore Wind Turbines Including a Simplified Method to Estimate Stress Factors
(Peer reviewed; Journal article, 2023-06)The use of floating offshore wind farms for electrical energy supply is expected to rise significantly over the coming years. Suspended inter-array power cables are a new design to connect floating offshore wind turbines ... -
A Survey Dataset Evaluating Perceptions of Civil Engineering Students about Building Information Modelling (BIM)
(Peer reviewed; Journal article, 2023)The implementation of Building Information Modelling (BIM) technologies has become increasingly central in the design, construction and maintenance of both civil structures and infrastructures. As more and more software ... -
Crack Arresting using Cutout Repair in Tubular Offshore Joints
(PhD thesis UiS;, Doctoral thesis, 2023)Finding efficient repair methods for cracked tubular joints in offshore structures is important, both as a permanent or temporary repair solution. The exploration of such methods and techniques includes the use of hole ...