Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 256-275 av 1213
-
Cost predictive model to support decision making regarding equipment replacement, using system analysis and system dynamics: A case study in Hydro Aluminium Karmøy.
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)Hydro is a fully integrated aluminium company with employees in countries worldwide. Maintaining equipment that is being used in the production of aluminium is an important and complex task. There are many critical operations ... -
Cost-Benefit Analysis of the Transition From Traditional On-Site Training to Interactive VR-training
(Master thesis, 2023)Virtual Reality (VR) is increasing in popularity as a training tool. The recent development of head-mounted displays (HMDs) that have become affordable and more companies starting to use VR, have made VR a popular research ... -
Cost-Benefit Analysis of the Transtion to Cloud Services
(Master thesis, 2023)This master’s thesis delves into the comprehensive assessment of transitioning from on- premises infrastructure to cloud services, focusing on the impact on Small and Medium Enterprises (SMEs). With the rapidly evolving ... -
Cost-effective model for self-assessment of maintenance management: An update to the “Maintenance Baseline Study” early developed by Norwegian Petroleum Directorate.
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)The self-assessment method is used to improve the maintenance management system and its related operations. It has the advantage over the maintenance auditing method, as it is a self-driven improvement method, less required ... -
Coupled dynamic analysis of cylindrical FPSO, moorings and riser based on numerical simulation
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The hostile environments are presently one of the challenges that should to be deal with in offshore floating system design where the hydrodynamic interaction effects and dynamic responses dominate the major consideration ... -
Craco propgation in steel plates using FEM and XFEM
(Master thesis, 2021)The pupose of this thesis is to compare stress intensity factor in steel plates using FEM and XFEM. Also to compare methodology in crack propgation with FEM and XFEM. The methods used is finite element method and extended ... -
Critical Design Phase for Subsea Module Supporting Structures
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)This master thesis is written at the University of Stavanger in collaboration with the Department of Mechanical and Structural Engineering and Materials Science. All subsea modules for subsea processing highly require ... -
Cr₂N utvikling ved isoterm varmebehandling og korrosjons egenskaper for UNS S322003
(Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)I denne oppgaven er materialet UNS S32003 (AL 2003 TM) isotermt varmebehandlet ved 800 °C, ved tidene 0.25, 0,5, 1, 2, 3,10, 100 timer. Det ble sett på korrosjonsegenskapene og forandring i mikrostrukturen med hovedvekt ... -
Cyber Security Applications in Cyber Physical Systems
(Master thesis, 2021)The dynamic evolutions of Cyber Physical Systems in the Industry 4.0 context are considered, their inherent complexity and pertinent interfaces are examined contemplating the influence of the current security environments ... -
Cyber Security in Organizations
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)The cyber threat towards digital systems and organizations are increasing. WannaCry is one of the latest large-scale cyberattacks which has had a global impact. The digitalization is transforming organizations to innovate ... -
Cyclist Posture Optimisation using CFD
(Masteroppgave/UIS-TN-IMBM/2018, Master thesis, 2018-06)A procedure for optimising the posture of a cyclist concerning the drag force predicted by computational fluid dynamics is developed and executed using open-source software only. The computational setup is validated by ... -
Damages in hollow core floor systems due to deflection of supporting beam and recommended solutions to control damage.
(Master thesis, 2021)Hollow core slabs (HCS) are pre-stressed concrete elements, normally supported by steel or reinforced concrete/pre-stressed concrete beams. Studies have shown that the deflection of the supporting beam may be the reason ... -
Data Stream Evaluation for Decision Enhancement to Prescribe Maintenance
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-18)Nowadays, global competition and rapid technological advancement in the oil and gas industry induce organizations to enhance their maintenance strategies. Oceaneering, as a company within the energy industry, employs ... -
Data-driven decision-making practice in response with drawworks maintenance notifications
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06)Offshore installations are complex and need to be maintained properly to keep expected performance. Critical failures on these installations might induce great threats on productivity, personnel safety, and environment. A ... -
Datamodell og måledataanalyse for Bybrua i Stavanger
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020)Denne oppgaven omhandler datamodellering og måledataanalyse av Bybrua i Stavanger. Hovedmålet er å konstruere en datamodell som samsvarer med den virkelige broen, i tillegg til å kartlegge de ulike egenfrekvensene og ... -
Decision Analysis in Contract Type Selection for an Offshore Field Development
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-16)Different contract types means different incentives, burdens and relationships. The contract type responsibilities and price should be in accordance with the project needs and organization capacities, not knowing this could ... -
Degradering av materialer, svikttyper og kompenserende tiltak relatert til forlengelse av levetid på aldrende offshore produksjonsinstallasjoner
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Flere offshore olje og gassinstallasjoner i Nordsjøen har vært i drift i over 20 år, noe som tilsier at mange komponenter og strukturer har vært i drift lengre enn hva de var designet for. Det vil si at topside rørsystemer ... -
Den virtuelle byggeprosess: Planlegging og gjennomføring
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)I denne rapporten vil arbeidsmetoden Virtual Design and Construction, forkortet til VDC, bli brukt for å forklare og eksemplifisere arbeidstittelen som ble utarbeidet i samarbeid med Multiconsult. Multiconsult ønsket å få ... -
Deploying and managing engineering assets: a case study of a Chinese oil service
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The author went through the developing history of COSL from 1990s to date and found that with 50% of its engineering assets deploying aboard at 2012, the overseas revenue in that year is counted 31% of the total revenue, ... -
Design analysis and optimization of offshore module
(Masteroppgave/UIS-TN-IKM/20121;, Master thesis, 2012)The structural analysis of topside module presents many technical challenges that have to be designed to overcome in efficient manner to meet a proper weight and strength control with respect to transportation, installation ...