Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 318-337 av 1213
-
Determination of an optimum testing and inspection interval for pressure safety valves
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Thos masters thesis work tries to examine the current procedures used for testing pressure safety valves, and the bench mark used that are used in defining an inspection and testing interval for pressure safety valves. ... -
Determining operating envelope for blade on a floating wind turbine using the extreme value ACER method
(Master thesis, 2022)In this scientific research, a methodological study has been carried out to compare the extreme loads on the blades of a 10MW floating wind turbine. A systematic comparison is being made between a probabilistic method ... -
Developing a dynamic risk simulator for rotating equipment integrity management
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)The aim of this thesis is to understand the existing relevant practices, processes, Norwegian regulations for rotating equipment and develop a simulator to model and simulate the lifetime of single-unit repairable systems ... -
Developing a framework for predictive maintenance for a land-based company from an Industry 4.0 perspective
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)The manufacturing industry today is filled with buzzwords like Industry 4.0, digitalization and automation. Emerging technologies enable operators and companies to better control asset lifetime, operations, failures and ... -
Developing a reference-model for benchmarking: performance improvement in operation and maintenance
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Statoil has a major responsibility of “driving simplification and improvement initiatives” by relying on tools such as benchmarking. The aim is to drive business performance based on best practice rather than on compliance. ... -
Developing framework to analyze world-class maintenance (wcm) indicators: gap analysis to highlight challenges and opportunities for the Norwegian petroleum industry
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)World-class Maintenance (WCM) is a unique business process which actually does not cost, rather pays back. This study was an initial attempt to understand the extent of WCM concept being utilized in the Norwegian industry. ... -
Development and Design of ROV Manipulator
(Bachelor thesis, 2023)The thesis is carried out in collaboration with the student organization UiS Subsea. The primary objective of this thesis is to design and develop a manipulator for the ROV, named YME, using the product development process ... -
Development and Design of ROV Manipulator
(Bachelor thesis, 2023)The thesis is carried out in collaboration with the student organization UiS Subsea. The primary objective of this thesis is to design and develop a manipulator for the ROV, named YME, using the product development process ... -
Development concept of oil field-A in the Pechora sea uner conditions of initial data uncertainty
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020)The development strategy of equipping an oil field of the Pechora Sea is discussed in this thesis. Because of the confidential data on the field received from PJSC Rosneft, the field is conventionally called Field-A in ... -
Development concepts for Sakhalin's offshore field development
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)When a company undertakes to develop an oilfield, certain activities represent the foundation of the development, ranging from information about the metocean conditions at the site to marketing. The concept phase itself ... -
Development concepts for the northern Caspian sea
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Today the Northern Caspian Sea is considered to be a very perspective region for oil and gas growth. However, the challenges encountered in the Northern Caspian Sea are not usually met in such combination in another regions, ... -
Development of a procedure for the assessment of microbiologically influenced corrosion
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)Operating offshore oil and gas production facilities is often associated with high risk. In order to manage the risk, operators commonly use aids to support decision making in the establishment of a maintenance and ... -
Development of a Wave-Driven Pump for Energy Production
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)Since the year of 2014, the oil and gas industry worldwide has experienced a backlash from years of prosperous field developments and implementation of technology for improved recovery. Overproduction of oil and gas has ... -
Development of a work process for condition management of topside static mechanical equipment
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Degradation and fatigue of static equipment is common in the offshore industry. The combination of saltwater, temperature, and humidity can significantly reduce the integrity of static process equipment, and thereby increase ... -
Development of actuating organ for electric intervention tool
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-07-01)This thesis describes the initial steps towards development of a modularized all-electric toolbox, to use during ROV intervention. Based on a vision of future subsea systems, which will rely on electrification and ... -
Development of an assessment procedure for environmental consequence in RBI analysis
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Even with the recent developments in renewable energy, oil & gas are still our most important energy source today. This will also be the case in the foreseeable future, but new demands are constantly being forced on the ... -
Development of Charging Tower for Shuttle Boats
(Master thesis, 2021)The companies Lyse AS, Stavangerregionen Havn IKS and Kolumbus has acquired electric shuttle boats to be used for sightseeing in Stavanger. Currently, there are no charging setup intended for the shuttle boats. The goal ... -
Development of FMEA/RCM methodology to be implemented in Generic Maintenance Concepts
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)This master thesis has developed methods for how to interpret failure data and incorporate these into OIA's existing database. This also gave input to improvement of OIA's existing software Kamfer to develop more functionality ... -
Development of Integrated Operations Strategy to Accelerate Offshore Operations Capability
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-07)Integrated operations is proven operating model to manage offshore assets smartly. BP with its Field of the Future program, Shell with its Smart Fields program, and Statoil with its Integrated ... -
Development of new lightweight concrete mixtures based on aplite and perlite
(Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)Cement extenders are commonly used as an addition to concrete mixtures to increase material properties. A mineral called aplite is a cement extender. This mineral contains many possible favourable properties. An experimental ...