Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 390-409 av 1213
-
Dynamic and Fatigue Analyses of Suspended Power Cables for Multiple Floating Offshore Wind Turbines
(Master thesis, 2023)Floating offshore wind turbines (FOWTs) are installed to effectively capture energy from offshore wind in deeper water areas where building bottom-fixed offshore wind turbines is not practical. The present study focuses ... -
Dynamic loads on telescopic safety joint for workover riser
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-05)The push in the industry towards increasing the weather window for marine operations offshore leads to a focus on new technology. When performing workover operations in a subsea well, the workover riser is a physical ... -
Dynamic response of a floating bridge under wind conditions from field measurements
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-28)The long and slender floating structures across the wide and deep waters are exposed for considerable environmental loads. In this study, the dynamic response of a curved floating pontoon bridge supported by side mooring ... -
Dynamic response of a floating offshore wind turbine
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)The ever increasing demand for renewable energy, combined with limited areas suitable for large wind farms, has put focus on the development of floating wind turbines. In this thesis the dynamic response of a floating ... -
Dynamisk analyse av bruer med jordskjelvlast
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Dette arbeidet ble utført våren 2011, som avslutning på studien Mastergrad i Konstruksjon og Materialer, ved Universitet i Stavanger, Norge. Oppgaven var meget utfordrende, først og fremst på grunn av omfanget (se 0.2 ... -
E39 and Slipforming of environmental-friendly concrete
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)Slipforming is a construction method that has been used in many years for production of concrete structures and it is mainly suited for tall structures such as towers, bridge columns, silos, and offshore platforms with ... -
Eastern-Mediterranean Metocean Design Basis
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-12-23)Energy is one of the basic requirements of sustainable development of civilizations. Mankind is moving further to harsher environments, e.g. marine and arctic environments, to sustain energy production. Technology evolution ... -
EBSD and TEM study of DMD manufactured cp-TI (grade 2)
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-29)Two components, 3D printed by Norsk Titanium components, through a direct metal deposition plasma transferred arc. An additive layer manufacturing technique. One made of a single wire layer thin sample, and one made of two ... -
Eco-friendly and cost-effective slab for an office building
(Bachelor thesis, 2022)It is very popular to use prefabricated concrete elements instead of cast-in-situ slabs in many different construction buildings. The background of this thesis is to study how this apply to large construction buildings as ... -
Effect of 3D printing on the microstructure and mechanical properties of an Inconel 718 Nickel-alloy (UNS N07718)
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Flow measuring instruments are important for the oil and gas industry. These instruments are exposed to hostile environments during operation. These hostile environments demands high quality materials with excellent ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)Bruken av stålarmering i form av armeringsjern har vært brukt i mange år for å forbedre strekk- og bøyestyrken til betongelementer. Forskningen og utviklingen innen betongfeltet utvides stadig på grunn av at betong er det ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)The use of steel reinforcement in the form of rebar has been used for many years to improve the tensile and flexural strength of concrete elements. The research and development within the field of concrete is ever expanding ... -
The Effect of CO2 Curing on Cement-Based Materials
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)Early carbonation curing of concrete elements has been shown to be a promising sustainable technology for CO2 capture and utilization, which would be beneficial for the environment. It has been found that carbonation curing ... -
Effect of electron beam welding on the microstructure and mechanical properties of nickel alloys
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-13)The effect of electron beam welding on the precipitation strengthened Ni-base superalloys Inconel 718 and Custom Age 625 PLUS have been investigated. Solidification of the weld metal in these alloys terminates in a eutectic ... -
Effect of Hydrogen on the Mechanical Properties of High Strength Steels
(Master thesis, 2021)The main purpose of this experiment is to compare the mechanical properties of hydrogen charged and uncharged samples. This thesis work started with the machining samples of AISI 1074 rectangular bar into tensile test ... -
Effect of localized corrosion on welded steel joints
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)With steel structures placed in ever increasing depths in the oil industry, inspection of the structures are increasingly more challenging. Loss of coating on a weld exposes the weld to a corrosive environment, where the ... -
Effect of Micro Silica on Alkali Activated Repair Mortar
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-14)In this era, concrete acts as a primary role in construction technology. Therefore, it is essential to pay widespread attention to the side effects of concrete products for the environment. On the other hand, the vulnerability ... -
Effective use of e-learning tool for organizational competence development and knowledge management
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The main objective of this research is to identify the possible gaps and improvements of E-learning module that implemented in Skretting company. The literature review was done to understand the meanings of comptence and ... -
Effects of cold rolling on the mechanical properties and grain structure of Inconel 718 alloy
(Master thesis, 2023)This master thesis in material science aimed to investigate the influence of increased degree of cold rolling reduction of precipitation formation in commercially produced Nickel-base superalloy Inconel 718, and evaluate ... -
Effects of impacts from large supply vessels on jacket structures
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-07-02)The current jacket structures installed on the Norwegian Continental Shelf (NCS) are designed to resist the impact energy from supply vessels with a 5000 tons displacement. This agrees with the requirement that is stated ...