Blar i Studentoppgaver (TN-IKM / TN-IMBM) på tittel
Viser treff 694-713 av 1213
-
Machine Learning Based Approach to Predict Fuel Consumption on Mobile Offshore Drilling Units
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-15)The use of machine learning models for optimization and improved decision-making has a great potential in the drilling industry. This thesis demonstrates a model for predicting fuel consumption on the Mobile Offshore ... -
Machine learning methods for assessing value-of-information
(Master thesis, 2022)One of the most useful features of decision analysis is its ability to distinguish between constructive and wasteful information gathering. Value-of-information (VOI) and sequential information gathering (Value-of-Flexibility, ... -
Maintenance Concept Study for Deep Subsea Tunnels: Rogfast Tunnel as a Case
(Master thesis, 2022)Today, Norway has 1259 road tunnels, 1185 are categorized as inland tunnels and 41 are categorized as subsea tunnels. In fact, the number of subsea tunnels has doubled in the last 20 years and entering a more challenging ... -
Maintenance Optimization for Drilling HPU using Proportional Hazard Model
(Master thesis, 2021) -
Maintenance Spend in the Tail-End Phase - Analysis of maintenance spend, resource allocation, and maintenance trends in tail-end offshore installations
(Master thesis, 2021)The thesis explores the intricacies of maintenance spend in the tail-end phase of offshore installations. The analysis relates to three different platforms, platform A (≈ 20+ years in operation), platform B (≈ 5-20 years ... -
Maintenance strategy for functional products
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-13)The Oil and Gas industry operating on the Norwegian continental shelf is entering the tail-end phase of oil and gas production. This cause an increase of the operational unit costs due to reduction in production volumes ... -
Managing the efficiency of foreign engineering contracts: A study of a Norwegian and South Korean project interface
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Oil & gas exploration and production industry in North Sea has greatly been challenged over the last decade with increasing cost profiles. This condition, together with relatively low oil price has begun to squeeze the ... -
Market-analysis of software for predictive maintenance solutions inthe Norwegian petroleum industry
(Master thesis, 2021)The Norwegian petroleum industry is currently undergoing a drastic technological change, often termed Industry 4.0. With this change, new innovative capabilities emerge across all operations and disciplines. Predictive ... -
Material characteristics of 3-D printed steel
(Master thesis, 2021)Additive manufacturing of metals is a technology where metal parts are built layer by layer from a 3D model. To do this a heat source is used to melt metal powder or metal rods. There is a large selection of processes that ... -
Material degradation in mooring chains for floating structures in deep waters
(Master thesis, 2022)There is a dire need for an efficient, trustworthy, and financially feasible positioning technique for offshore large floating structures. Of all the methods of positioning the offshore structures, the mooring chains play ... -
Material usage of offshore wind turbines, and its sustainability impact on the environment.
(Master thesis, 2022)As the world is working towards a greener energy environment, we see that more and more companies are changing their course to meet the green shift. Our future jobs will try to move more away from oil and fossil fuels, and ... -
Måling av arbeidsprosesser for Ferdigstillelsesgruppen i Reinertsen AS
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Oppgaven har som mål å etablere metoder for å måle arbeidsprosessene som inngår i gjennomføringen av mekanisk ferdigstillelse, systemutprøving og overlevering. For å kunne gjøre dette har det vært nødvendig for forfatter ... -
MBSE to support Asset Maintenance & Integrity: Requirement and Behavioral analysis
(Master thesis, 2022)The oil and gas industry has been an important contributor to Norway’s economy ever since oil and gas production started on the Norwegian continental shelf. The oil and gas industry needs innovative solutions to stay ... -
Mechanical and microstructual investigation of 3D-printed Alloy 625
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)Additive manufacturing is in the wind and shows great promise as a manufacturing technique. In this thesis the properties of the additive manufactured EOS alloy 625 is investigated. Tensile, CharpyV, Vickers, and pitting ... -
Mechanical and microstructural analysis of 3D-Printed 316L stainless steel
(Master thesis, 2021)The project aims to analyze the mechanical properties and microstructure study of 316L stainless steel, which is as-printed using the selective laser melting (SLM) technique. Metal components produced by the SLM process ... -
Mechanical and microstructural assessment of a novel 3D-printed AlSi10Mg- Ti6Al4V alloy using Direct Laser Deposition
(Master thesis, 2023)A novel AlSi10Mg-Ti6Al4V alloy fabricated through DLD was investigated. The novel alloy consists of 92 wt.% AlSi10Mg and 8 wt.% Ti6Al4V. The alloy was found to have very weak mechanical properties, but it was very apparent ... -
Mechanical design of latching/release mechanism
(Master thesis, 2022)This thesis documents the early development phase of a latch and release mechanism, where the goal was to make a 10mm separation within 10ms to break 4 electrical circuits. The thesis was proposed by Easee AS, a leading ... -
Mechanical properties and microstructure of 17-4 Ph stainless steel made by Jet binder additive manufacturing
(Bachelor thesis, 2023)Additive manufacturing is a field seeing constant innovation. This thesis looks at the mechanical properties and microstructure of a Binder Jet Printing (BJP) technology using the stainless steel alloy 17-4 PH. 17-4 PH is ... -
Mechanical properties of 316L stainless steel made by selective laser melting using powder produced from recycled scrap material by vacuum induction gas atomizing.
(Bachelor thesis, 2021)The purpose of this study has been to investigate if 316L powder for Selective Laser Melting (SLM) can be made from scrap material by the process of Vacuum Induction Gas Atomizing (VIGA). Unused parts from storage represented ... -
Mechanical properties of steel at higher temperatures: A new formulation of reduction factors and its comparison with Eurocode/Experimental data
(Bachelor thesis, 2021)Steel is a strong material widely used in a wide array of industries; however, this material will lose a lot of this strength during elevated temperatures, which are calculated using reduction factors. Optimizing these ...