Blar i Studentoppgaver (TN-IKM / TN-IMBM) på forfatter "Hansen, Vidar Folke"
-
EBSD and TEM study of DMD manufactured cp-TI (grade 2)
Berg, Alexander (Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-29)Two components, 3D printed by Norsk Titanium components, through a direct metal deposition plasma transferred arc. An additive layer manufacturing technique. One made of a single wire layer thin sample, and one made of two ... -
Mechanical and microstructural assessment of a novel 3D-printed AlSi10Mg- Ti6Al4V alloy using Direct Laser Deposition
Hidle, Stian Runestad (Master thesis, 2023)A novel AlSi10Mg-Ti6Al4V alloy fabricated through DLD was investigated. The novel alloy consists of 92 wt.% AlSi10Mg and 8 wt.% Ti6Al4V. The alloy was found to have very weak mechanical properties, but it was very apparent ... -
Microstructure and Mechanical Properties of SLM Printed Super Duplex Stainless Steel (EN 1.4410)
Yadav, Pravesh Kumar (Master thesis, 2021)The purpose of this study is to investigate the microstructural and mechanical characterization of super duplex stainless steel of grade EN 1.4410 / AISI SAF 2507 manufactured by selective laser melting (SLM). The findings ... -
Microstructure and mechanical tests of a weld on a TIG welded UNS S31803 duplex stainless steel pipe
Heggholmen, Silje Helen (Master thesis, 2023)University of Stavanger was given a pipe consisting of two parts of the duplex stainless steel grade UNS S31803, which had been welded together using TIG welding. The thesis is about examining the weld that goes around the ...