Browsing Studentoppgaver (TN-IEP) by Title
Now showing items 53-72 of 323
-
Barite Sag Settling measurement techniques – direct method
(Master thesis, 2021)One of the main roles of drilling fluid is controlling the downhole pressure. Weighting materials are employed in drilling fluid for this aim. Barite is the most common agent, which is used for increasing density. There ... -
Blå Hydrogen Produksjon
(Bachelor thesis, 2021)Hydrogen as a chemical energy carrier for green energy will play an important role in the reduction of CO2 emissions. Today 76% of the world’s hydrogen production comes from fossil fuels, from natural gas and coal without ... -
Blocking of fracture by Laponite/HPAM gels: Experiments and simulations
(Master thesis, 2021)Water production is the primary obstacle for oil recovery with water injection from heterogeneous reservoirs with high-permeability streaks and fractures. The practical approach to solve the adverse effects of water flooding ... -
Blowout Flow Rate Modelling
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)A blowout represent one of the major concerns associated with drilling, completion, maintenance and production of an oil field. Calculation of blowout rate is commonly one of the first steps in an Environmental Risk Analysis, ... -
Boundary Condition Treatment in a Transient Flow Model
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-14)Transient flow modelling used for hydraulic calculations and well control evaluations is a vital part to the safety in the industry to properly prepare and build correct procedures when constructing wells. Modeling liquid ... -
Carbon dioxide storage in saline aquifers
(Bachelor thesis, 2021)Thesis about carbon dioxide storage in saline aquifers and other sedimentary basins -
Carbonated water injection in chalk for enhanced oil recovery at high temperature
(Master thesis, 2022)The increased demand of hydrocarbons in combination with the climate change represent a current challenge for a petroleum industry that aims to increase the production and reduce its emissions. Reaching the Paris agreements ... -
Casestudie av væske/vann-varmepumpe
(Bachelor thesis, 2021)Oppgaven tar utgangspunkt i en enebolig lokalisert i Stavanger, som i forbindelse med rehabilitering, installerte en væske/vann-varmepumpe. Det spesielle med dette anlegget er at varmeenergien hentes fra en kuldebærer, ... -
Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum
(Master thesis, 2022)Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ... -
Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum
(Master thesis, 2022)Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ... -
Catalytic hydrogenation of CO2 to methanol over In-promoted Cu/ZnO/Al2O3 derived from hydrotalcite-like precursors
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)Carbon dioxide emissions present a threat on a global level, driving governments and the scientific society to search for sustainable solutions to ease the effects of climate change. Carbon utilization offers a potentially ... -
Challenges associated with mercury occurrence on the Norwegian Continental Shelf
(Master thesis, 2023)The thesis includes a review of the heavy metal mercury, with focus on its origin, effect on the environment, and its role in the petroleum industry. Mercury emissions from the petroleum industry in Norway is looked into ... -
Classification of Hydraulic Flow Units in the Whicher Range Field
(Bachelor thesis, 2021)Determination of reservoir rock type is one of the most important tasks for simulation, modelling and prediction of the hydrocarbon reservoir behavior. Hence, using methods that predict rock types as accurately as possible, ... -
Classification of Hydraulic Flow Units in the Whicher Range Field
(Bachelor thesis, 2021)Determination of reservoir rock type is one of the most important tasks for simulation, modelling and prediction of the hydrocarbon reservoir behavior. Hence, using methods that predict rock types as accurately as possible, ... -
CO2 capture by adsorption
(Master thesis, 2021)The increasing concentration of CO2 in the atmosphere entails casualties, mainly global warming issues. For quite a long time, considerable efforts have been dedicated to suppressing this issue. Amongst the proposed ... -
CO2 Injection in Shales for CCUS
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-08-15)Shale gas production has had great impact on energy supply and fuel prices. Due to low permeability and reservoir complexity the recovery factors are still very low. A promising alternative to pressure depletion is injection ... -
CO2 Plume Migration in the Stø Formation: A simulation study
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)The need for improving the quality of our environment by reducing CO2 emissions and in the meantime increasing the recovery of hydrocarbons could be a mutually beneficial situation. Therefore, having additional reserves ... -
Compact Subsea Pipe Separator- Experimental Investigation of Flow Regime in an Inclined Pipe
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-14)The production of petroleum from well is always accompanied by water production, which causes several problems such as loss of pressure in the production line, environmental pollution, corrosion, and issues in transportation ... -
Comparative Analysis and Enhancement of Simplified Drilling Process Simulation Models and Exploring Machine Learning for Real-Time Optimization
(Bachelor thesis, 2023)Real-time optimization of drilling processes is vital for the efficient and safe operation of the oil and gas industry. For this, fast and robust models are required to enable automation safety strategies. Many existing ... -
Comparison Between a Numerical Model and an Analytical Model for Drag Prediction
(Master thesis, 2022)High torque and drag create problems in directional wells. Directional wells have increased in inclination and length over the years, whereas the extended reach wells (ERW) are particularly prone to torque and drag ...