• Automated Real-Time Rate of Penetration Optimization Using Trend and Dynamic Analysis in Drilling Operations. 

      Ochije, Uchenna Blesseth (Master thesis, 2023)
      Several drilling parameters influence the rate of penetration (ROP), including formation strength, normal compaction, bottom-hole pressure differential, flow rate, weight on bit (WOB), rotary speed (RPM), bit diameter, bit ...
    • Automatic evaluation of wavelength spectra from quartz by means of machine learning 

      Kvandal, Ove (Master thesis, 2022)
      I have for this thesis worked on automating the steps in evaluating wavelength spectra from quartz. To do this I have applied different machine learning algorithms suitable to the automation requirement at each step, and ...
    • Autonomous Trajectory Design Considering the Limitation of Torque and Drag Forces 

      Suleman, Muhammad (Master thesis, 2023)
      In the oil and gas industry, designing well trajectories is an important part of drilling operations that affect well construction, completion, and production. But the current trajectory planning process works in isolation ...
    • Availability and Quality of Drilling Data in the Volve Dataset 

      Nagy, Attila (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06)
      The importance of data sharing cannot be overexaggerated today, when the recent trend toward automation fundamentally reshapes the way of how operations are done in the oil industry. The emergence of real-time trend analysis ...
    • Barite Sag Settling measurement techniques – direct method 

      Rezaei, Milad (Master thesis, 2021)
      One of the main roles of drilling fluid is controlling the downhole pressure. Weighting materials are employed in drilling fluid for this aim. Barite is the most common agent, which is used for increasing density. There ...
    • Blå Hydrogen Produksjon 

      Stine Lise Landaas (Bachelor thesis, 2021)
      Hydrogen as a chemical energy carrier for green energy will play an important role in the reduction of CO2 emissions. Today 76% of the world’s hydrogen production comes from fossil fuels, from natural gas and coal without ...
    • Blocking of fracture by Laponite/HPAM gels: Experiments and simulations 

      Gurzaliyev Elnur (Master thesis, 2021)
      Water production is the primary obstacle for oil recovery with water injection from heterogeneous reservoirs with high-permeability streaks and fractures. The practical approach to solve the adverse effects of water flooding ...
    • Blowout Flow Rate Modelling 

      Kamilla, Helland (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      A blowout represent one of the major concerns associated with drilling, completion, maintenance and production of an oil field. Calculation of blowout rate is commonly one of the first steps in an Environmental Risk Analysis, ...
    • Boundary Condition Treatment in a Transient Flow Model 

      Roxman, Keino (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-14)
      Transient flow modelling used for hydraulic calculations and well control evaluations is a vital part to the safety in the industry to properly prepare and build correct procedures when constructing wells. Modeling liquid ...
    • Carbon dioxide storage in saline aquifers 

      Log, Marius (Bachelor thesis, 2021)
      Thesis about carbon dioxide storage in saline aquifers and other sedimentary basins
    • Carbonated water injection in chalk for enhanced oil recovery at high temperature 

      Kleiberg, Sander Haaland (Master thesis, 2022)
      The increased demand of hydrocarbons in combination with the climate change represent a current challenge for a petroleum industry that aims to increase the production and reduce its emissions. Reaching the Paris agreements ...
    • Casestudie av væske/vann-varmepumpe 

      Kvalsund, Anne (Bachelor thesis, 2021)
      Oppgaven tar utgangspunkt i en enebolig lokalisert i Stavanger, som i forbindelse med rehabilitering, installerte en væske/vann-varmepumpe. Det spesielle med dette anlegget er at varmeenergien hentes fra en kuldebærer, ...
    • Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum 

      Abdulhameed, Imran; El Taliani, Yaser (Master thesis, 2022)
      Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ...
    • Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum 

      Abdulhameed, Imran; El Taliani, Yaser (Master thesis, 2022)
      Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ...
    • Catalytic hydrogenation of CO2 to methanol over In-promoted Cu/ZnO/Al2O3 derived from hydrotalcite-like precursors 

      Chamssine, Fawzi (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      Carbon dioxide emissions present a threat on a global level, driving governments and the scientific society to search for sustainable solutions to ease the effects of climate change. Carbon utilization offers a potentially ...
    • Challenges associated with mercury occurrence on the Norwegian Continental Shelf 

      Ryningen, Gro (Master thesis, 2023)
      The thesis includes a review of the heavy metal mercury, with focus on its origin, effect on the environment, and its role in the petroleum industry. Mercury emissions from the petroleum industry in Norway is looked into ...
    • Classification of Hydraulic Flow Units in the Whicher Range Field 

      Gåsland, Silje; Barka, Madeleine (Bachelor thesis, 2021)
      Determination of reservoir rock type is one of the most important tasks for simulation, modelling and prediction of the hydrocarbon reservoir behavior. Hence, using methods that predict rock types as accurately as possible, ...
    • Classification of Hydraulic Flow Units in the Whicher Range Field 

      Barka, Madeleine.; Gåsland, Silje. (Bachelor thesis, 2021)
      Determination of reservoir rock type is one of the most important tasks for simulation, modelling and prediction of the hydrocarbon reservoir behavior. Hence, using methods that predict rock types as accurately as possible, ...
    • CO2 capture by adsorption 

      Seyidov Ibrahim (Master thesis, 2021)
      The increasing concentration of CO2 in the atmosphere entails casualties, mainly global warming issues. For quite a long time, considerable efforts have been dedicated to suppressing this issue. Amongst the proposed ...
    • CO2 Injection in Shales for CCUS 

      Shahab, Armin (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-08-15)
      Shale gas production has had great impact on energy supply and fuel prices. Due to low permeability and reservoir complexity the recovery factors are still very low. A promising alternative to pressure depletion is injection ...