• Manipulation of the choke pressure during Managed Pressurized Drilling (MPD) operation 

      Amini Shahreza, Yasin (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06)
      In the present investigation, the disturbance and its effect on the bottom hole pressure has been studied. After digging into the prior works, it’s figured out that the reason of their failure is oversimplification and ...
    • Manufacturing Software Prototype for applying fuzzy MCDM in Well completion optimization 

      Riaz, Sarmad (Master thesis, 2021)
      Well completion is the important system to put the well into the production phase. This well completion engineering system is complex engineering which requires reservoir drilling, cementing of the well, installation of ...
    • Material behavior of perforated and non-perforated simply supported steel plates in air and water, subjected to impact loads. 

      Andreassen, Charlotte; Løklingholm, Thomas (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-12)
      Due to challenging economic times, industries such as oil and gas face the need of moving from customized, time-consuming, and costly solutions, to more standardized technologies, to reduce costs and maintain high profits. ...
    • Mathematical and Numerical Modelling of Lithium Battery 

      Bandara, Yasas (Master thesis, 2021)
      Application of lithium-ion batteries have increased in recent years due to their high energy density, low weight and smaller form factor. Machine learning algorithms are used in lithium-ion battery management systems due ...
    • Measurement and Control in a Flow Loop System 

      Saeby, Kristoffer (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-13)
      Automation of processes is key to perfecting them. Several systems exist in order to simply this process, although they may be simple to use most are however, expensive to acquire. This thesis attempts to program an Arduino ...
    • Measurement of Viscosities and Friction Pressures in Non-Newtonian Fluids 

      Rahimi, Nora Nafiseh (Bachelor thesis, 2021)
      The purpose of this bachelor project is to investigate the correlation between friction pressure predictions inferred from rheometer measurements and actual friction pressures in a pipe. A modular pipe flow loop is designed ...
    • Measuring the Magnetic Content of Drilling Fluid 

      Khalili, Pouya (Master thesis, 2021)
      Magnetic contamination of drilling fluid can impact the accuracy of the directional surveying by shielding the magnetic field. Additionally, this contamination, such as swarf or finer magnetic particles, can agglomerate ...
    • Mechanical Earth Modelling (MEM) and Well Design for High Pressure High Temperature Fields 

      Matsouka Apostolia Nefeli (Master thesis, 2022)
      Conventional reservoirs are being depleted and attention has been given to more demanding conditions, like high pressure high temperature (HPHT) environments or under salt formations. There are, however, limited documents ...
    • Mistet sirkulasjon og Kick-utfordringer i en borebrønn 

      Sharif Ahmed Mahad (Bachelor thesis, 2023)
      Abstrakt Tapt av sirkulasjon og utfordringer knyttet til kick utgjør betydelige risikoer og operasjonelle vaskeligheter i olje-og gassboringsoperasjoner.Tapt av sirkulasjon refererer til utilsiktet tap av borevæsker inn i ...
    • Modelling and Simulation of Annular Pressure Build up 

      Elsheikh, Muhammed Mahmoud Abdelrhman (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06)
      Annular pressure buildup (APB) has been a concern for well design in the recent years. It is a phenomenon that relates mainly to subsea wells with possibly no means to release the pressure building up in closed annuli. ...
    • Modern Casing Design Optimization 

      Aarnes, Christian (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      “Working Stress Design” is the most used casing design method and has been for many years, on the Norwegian continental shelf as well as all over the globe. It is a simple method which in essence comprises of calculating ...
    • MPD - Field case Studies, Modelling and Simulation Studies 

      Oliveira, Luize (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-07-10)
      Due to energy demands and depletion of the existent reservoirs, the oil and gas industry is expanding new frontier exploration and production works such as in deep-water, HPHT zones and arctic regions. However, due to ...
    • Multi-well Interference Test Analysis 

      Molina Landinez, Juan Luis (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020)
      Understanding if there is any hydraulic communication, between the wells within a reservoir and a degree of the communication have been a subject of study for a long time. This information becomes crucial when injection ...
    • Multiphase air-water flow loop, Construction and Experiments 

      Shouib, Ahmad Khaled (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-07-26)
      The main aim of this work is to build and assemble a two-phase fluid-loop. This loop will allow us and the future students at the university of Stavanger to access a facility which will provides direct opportunities to ...
    • New Drilling Technology for Hole Cleaning and Efficient Drilling 

      Moe, Gisle (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-07)
      Well integrity is an important safety aspect of a well. Lack of wellbore integrity can lead to challenges like wellbore collapse, stuck pipe, lost circulation and sloughing shales, which are all big problems for drillers. ...
    • New Eco-Friendly Drilling Fluids Synthesis and Characterization: Experimental and Simulation Studies 

      Weber, Kyleen (Master thesis, 2023)
      Drilling fluids are an essential part of a safe and successful drilling operation. They offer several key functions such as transporting cuttings to the surface and controlling wellbore pressure. When designing a new ...
    • New method for measuring viscosity of mixtures of two fluids 

      Slettebø, Jon Kristian (Bachelor thesis, 2023)
      When executing a drilling operation in a well, rheological properties are important to understand in order to have the most error- and problem-free drilling operation as possible. Drilling fluids such as mud, spacer and ...
    • New Nanoparticle Based Drilling Fluid Formulation and Characterization: Experimental and Simulation Studies 

      Fattnes, Lene (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020)
      Drilling fluids are an essential part of any drilling operation and it offers several functions of great importance, such as controlling the wellbore pressures and transporting cuttings to the surface. The design of a ...
    • NiFe hydrotalcite-derived catalyst for CO2 reforming of methane: the impact of calcination and reduction temperature 

      Parra Camacho, Anderson (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      ABSTRACT Carbon dioxide (CO2) emissions has become a major environmental concern for today’s society. As energy demand keeps on rising, the transition to cleaner energies is not fast enough to completely reduce greenhouse ...
    • Non-Destructive Activation of Pine Wood (Picea Abies) 

      Eleri, Obinna (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      This study investigates a novel technique of non-destructive activation(NDA) of Pine wood (Picea Abies) via the aid of chemical activation in the presence of a metal additive. Two additives (Cu and Al) were considered in ...