Blar i Studentoppgaver (TN-IEP) på forfatter "Fjelde, Kjell Kåre"

Viser treff 1-20 av 20

    • A comparison of working stress design and reliability based casing design 

      Nyhus, Karoline (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      Working stress design is the most common design method used on the Norwegian continental shelf and its simplicity makes it easy to understand. However, other methods as the reliability based design gives a different view ...

    • A Novel Approach to Qualifying Bismuth as a Barrier Material 

      Knutsen, Trine (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-12)
      The barrier material conventionally used for permanent P&A is cement. Since two barriers are a requirement to properly isolate potentially flowing formations, the reliability of the barriers could be enhanced by introducing ...

    • Alternatives to conventional rig for P&A on fixed installations 

      Hovland, Martin (Bachelor thesis, 2023)
      Looking forward, there will be a need of performing a considerable number of permanent plugging and abandoning (PP&A) of oil and gas wells on the Norwegian Continental Shelf (NCS). These wells just cannot be left behind. ...

    • An End-To-End Machine Learning Project for Detection of Stuck Pipe Symptoms During Tripping Operations 

      Pacis, Felix James (Master thesis, 2021)
      Non-productive time due to stuck pipe costs the Oil and Gas industry substantial losses amounting to $250 million annually [1]. Thus, it is imperative for companies to invest in tools that can aid in prevention. This study ...

    • An Overview and Discussion of MPD Systems used in Offshore Operations 

      Vik, Elisabeth; Sommernes, Ida Morberg (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06)
      Globally, established fields are reaching maturity and easily accessible reserves have already been exploited. The remaining reserves are generally more difficult to drill and attempting to drill them using conventional ...

    • Applications and Selection of Dissolvable Materials in Well Completions 

      Keerthivasan, Vijay Kumar (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)
      Dissolvable materials are an emerging technology in the petroleum industry with multiple areas of application, the chief among them being multistage well stimulation. The challenges associated with removal of traditional ...

    • Blowout Flow Rate Modelling 

      Kamilla, Helland (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)
      A blowout represent one of the major concerns associated with drilling, completion, maintenance and production of an oil field. Calculation of blowout rate is commonly one of the first steps in an Environmental Risk Analysis, ...

    • Boundary Condition Treatment in a Transient Flow Model 

      Roxman, Keino (Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-14)
      Transient flow modelling used for hydraulic calculations and well control evaluations is a vital part to the safety in the industry to properly prepare and build correct procedures when constructing wells. Modeling liquid ...

    • Comparison Between a Numerical Model and an Analytical Model for Drag Prediction 

      Abrahamsen, Camilla (Master thesis, 2022)
      High torque and drag create problems in directional wells. Directional wells have increased in inclination and length over the years, whereas the extended reach wells (ERW) are particularly prone to torque and drag ...

    • A Comparison of Different Models for Probabilistic Kick Tolerance Calculations 

      Kristoffersen, Martine (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-14)
      Kick tolerance is an evaluation of how large kick sizes an open hole section can withstand without threatening the formation integrity at the shoe. If a certain kick size cannot be handled safely, the planned open hole ...

    • Energibrønner 

      Andersen, Amalie Frafjord; Kolstø, Sara Marlen (Bachelor thesis, 2023)
      Det foreligger i dag et stort behov for å finne nye grønne energikilder som er bærekraftige. Vi trenger nye energikilder som ikke påvirker miljøet negativt og som i tillegg gir stabil tilførsel av energi gjennom hele året. ...

    • Energibrønner 

      Kolstø, Sara Marlen; Andersen, Amalie Frafjord (Bachelor thesis, 2023)
      Det foreligger i dag et stort behov for å finne nye grønne energikilder som er bærekraftige. Vi trenger nye energikilder som ikke påvirker miljøet negativt og som i tillegg gir stabil tilførsel av energi gjennom hele året. ...

    • ERD Wells & Drag Calculations 

      Ramstad, Magnus Fosnes (Bachelor thesis, 2021)
      This thesis investigated Extended reach drilling (ERD), which is the term for drilling high-angle, long horizontal directional wells. ERD wells has had tremendous developments, as new technology continues to break worlds ...

    • Modelling and Simulation of Annular Pressure Build up 

      Elsheikh, Muhammed Mahmoud Abdelrhman (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06)
      Annular pressure buildup (APB) has been a concern for well design in the recent years. It is a phenomenon that relates mainly to subsea wells with possibly no means to release the pressure building up in closed annuli. ...

    • NORSOK requirements for P&A - comments 

      Staveland, Per Marius (Bachelor thesis, 2021)
      Today there are 6944 wells drilled on the Norwegian Continental Shelf (NCS) [3]. All of these wells have to be permanently plugged and abandoned in the future. This will come at an estimated cost of £35- £104 billion ...

    • A Numerical Study of Pressure Build Up due to Kick Migration in a Closed Well Filled with Water-Based Mud 

      Tat, Thea Hang Ngoc (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-15)
      There has been considerable and diverging discussion in the academic literature regarding the real gas kick velocity. This thesis contributes to improving and sharing the knowledge about the real gas kick velocity. It is ...

    • PI Regulation in CBHP-MPD Simulation using a Transient Flow Model 

      Ask, Kent Arne (Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06)
      An introduction to control engineering theory is given. The thesis further explores the implementation of a PI regulator in a transient flow model based on the AUSMV scheme. Optimal regulator parameters are important in ...

    • Reliability-Based Casing Design with Focus on an APB Collapse Scenario 

      Bjørndal, Erling (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)
      In times of unstable oil price, optimization related to casing and tubing design becomes more important than ever. Reducing cost and at the same time ensuring reliable and safe drilling and completion installations becomes ...

    • Simulation Study and Modelling Improvements for the Bullheading Process 

      Abdelgadir Mohammed, Mohammed Elsiddig (Master thesis, 2022)
      In a bullheading operation, selecting the right pumping rate is vital to the job's success. A too low pumping rate may not displace the undesired fluid back into the formation, and a too-high rate generates high surface ...

    • Well Barrier Restoration Across Dual Cemented Liners 

      Skoge, Charlotte (Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06)
      In the past years there has been an increased focus on decommissioning of wells in the NCS. Decommissioning of wells introduces significant investments with no financial returns and has for those reasons historically had ...