Vis enkel innførsel

dc.contributor.authorAlsaker-Haugen, Joakim Andrè
dc.date.accessioned2020-11-11T09:55:44Z
dc.date.available2020-11-11T09:55:44Z
dc.date.issued2020-07-13
dc.identifier.urihttps://hdl.handle.net/11250/2687305
dc.descriptionMaster's thesis in Robot Technology and Signal Processingen_US
dc.description.abstractThis thesis describes the work done in contribution to the UiS Drillbotics 2020 drill rig design for the annual international Drillbotics competition. Drillbotic is a competition for universities to design and build a miniature drilling rig that autonomously drills through a rock sample, with control algorithms and sensors. This thesis’s objective is to documents the work related to the design of a tracking system for a drill bit on a miniature drilling rig. This design included implementing an Attitude and Heading reference system (AHRS), kinematics, calibration of sensors, and design of a bottom hole sensor card to be implemented in an existing control system. Furthermore, it was worked on changing the existing actuator controllers from an Arduino based system to PLC. The tracing system was designed for in association with the new guidelines for the annual international Drillbotics competition. One of the new rules implemented in the 2020 Drillbotics competition is the mandatory requirements for the use of both surface and downhole sensors. In this thesis, I focus on the designing and implementation of a tracing system. This includes the design and testing of different sensor calibration and estimation methods to find a solution for tracking the drill bit in real-time. The developed tracing system should be able to track the drilling path through a known rock sample.en_US
dc.language.isoengen_US
dc.publisherUniversity of Stavanger, Norwayen_US
dc.relation.ispartofseriesMasteroppgave/UIS-TN-IDE/2020;
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.subjectMEMS Sensor Calibrationen_US
dc.subjectAHRS designen_US
dc.subjectdrillboticsen_US
dc.subjectinformasjonsteknologien_US
dc.titleAttitude and Heading Reference System for a laboratory drilling rig control systemen_US
dc.typeMaster thesisen_US
dc.subject.nsiVDP::Teknologi: 500::Informasjons- og kommunikasjonsteknologi: 550en_US


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal