Blar i UiS Brage på emneord "TCC"
Viser treff 1-6 av 6
-
Application of thermo-mechanically treated drill cuttings as an alternative to bentonite in spud muds
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-05-22)Drill cuttings recovered after drilling with OBM today are treated and deposited at onshore facilities. The TWMA Company offers a new technology, which recovers drilled subsurface materials together with oil and water ... -
Energy efficient drill cuttings treatment plant designed by Norwegian-Group AS A feasibility study
(Masteroppgave/UIS-TN-IMN/2015;, Master thesis, 2015-01-29)The cuttings produced by the oil and gas industry must be handled according to legislations. According to OSPAR, drill cuttings should contain less than 1 percent oil by weigh before discharged. There is several cuttings ... -
Evaluation of TCC treatment of hazardous waste in line with onshore and offshore disposal legislations
(Masteroppgave/UIS-TN-IMN/2012;, Master thesis, 2012-07)The significance of a proper Drilling Waste Management has increased in the Petroleum Industry throughout the years. Development of a sustainable Drilling Waste Management is often associated with complying with zero ... -
Limitations of the Revised DREAM Model
(Masteroppgave/UIS-TN-IMN/2012;, Master thesis, 2012)DREAM (Dose-related Risk and Exposure Assessment Model) is a risk assessment tool for modeling offshore waste discharge to the marine environment. The drilling waste model was developed through the joint industrial project ... -
Study of the Process, Design and Operating Parameters Effect on the Efficiency of the Process Mill
(Master thesis, 2014-10-08)The study is dedicated to a computational model for the process mill using finite element software precisely COMSOL Multiphysics 4.4. A finite element model of the process mill was constructed using dimensions similar to ... -
Thermomechanical cuttings cleaner – qualification for offshore treatment of oil contaminated cuttings on the norwegian continental shelf and martin linge case study
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-05-28)The aim of this thesis is to introduce and qualify the Thermomechanical Cuttings Cleaner (TCC) technology for treatment of oil contaminated cuttings on the Norwegian Continental Shelf (NCS) with particular reference to the ...