Blar i Faculty of Science and Technology på tittel
Viser treff 4180-4199 av 7092
-
Modeling and Evaluating NFV-Enabled Network Services under Different Availability Modes
(Chapter, 2019)Network and Telecom operators are continuously embracing the adoption of Network Function Virtualization (NFV) as a means to provide more agile, flexible and cost-efficient services. Many telecommunication services need ... -
Modeling and identification of the Quanser Aero using a detailed description of friction and centripetal forces
(Chapter, 2023)This paper deals with the modeling and identification of the Quanser Aero. The Quanser Aero is an aerospace laboratory setup designed for teaching aerospace concepts. Two propellers generate thrust and allow the user to ... -
Modeling and investigation of the performance of a solar-assisted ground-coupled CO2 heat pump for space and water heating
(Peer reviewed; Journal article, 2023)The rise in the popularity of heat pumps should be accompanied by the increase in the utilization of environmentally-safe working fluids. To push for wider uptake of hybrid heat pump systems that use natural working fluids, ... -
Modeling and Simulation of Oil Drilling Activities
(Masteroppgave/UIS-TN-IDE/2018;, Master thesis, 2018-06)The oil demand keeps growing worldwide [1]. The oil price keeps changing as the low prices are powering the trend couple of months back but then it raised. The price is relative as it depends on many factors. The Exploration ... -
Modeling energy consumption and heat exchange of buildings
(Master thesis, 2021)High energy demand and the use of greenhouse gases are issues of today’s world. The world has a higher energy consumption now than ever before, and it is estimated to increase further. With the rise of renewable energy, ... -
Modeling Energy Consumption and Heat Exchange of Buildings
(Master thesis, 2023)This research thesis investigates energy consumption and thermal dynamics in buildings, with a focus on achieving energy efficiency and indoor comfort in cold-climate regions like Norway. There is a necessity for the ... -
Modeling humanoid swarm robots with petri nets
(Masteroppgave/UIS-TN-IDE/2015;, Master thesis, 2015-06)Robots have become a hot topic in today‟s electronic world. There are many definitions for it. One of the definition in Oxford dictionary states “a robot is a machine capable for carrying out a complex series of action ... -
Modeling of breaking wave loads on jacket structure in FEM software USFOS
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)This thesis will in the first part present introduce and state the current development of offshore wind energy, and some of the motivations behind it. It will then present the current configurations and justify the need ... -
Modeling of dirty sands and clay zones with poor production characteristics
(Masteroppgave/UIS-TN-IPT/2011;, Master thesis, 2011)The Statfjord field is one of the oldest and largest oil and gas producing fields on the Norwegian continental shelf. It is currently at its late life production period with pressure depletion as the main production ... -
Modeling of Environmental Fate and Effects of Oil Leakages from Abandoned Subsea Wells Using an Environmental Impact Factor Tool
(Peer reviewed; Journal article, 2021)Potential environmental consequences of oil leakages (i.e., continuous uncontrolled releases at low flow rate over a long period of time) need to be taken into consideration in the ongoing development of plug and abandonment ... -
Modeling of Heavy-Oil Flow with Regard to Their Rheological Properties
(Peer reviewed; Journal article, 2021)With the depletion of traditional energy resources, the share of heavy-oil production has been increasing recently. According to some estimates, their reserves account for 80% of the world’s oil resources. Costs for ... -
MODELING OF LULC CHANGES BASED ON HIGHWAYS IMPROVEMENT IN STAVANGER BETWEEN 1968 AND 2019
(Master thesis, 2021)New transportation infrastructures like the highways E39 and R509 are necessary for any economic boost in Stavanger and they have had great impacts to scatter development from the undeveloped to the developed locations, ... -
Modeling of Swab and Surge Pressures: A Survey
(Peer reviewed; Journal article, 2022-03)Swab and surge pressure fluctuations are decisive during drilling for oil. The axial movement of the pipe in the wellbore causes pressure fluctuations in wellbore fluid; these pressure fluctuations can be either positive ... -
Modeling of the viscous effects in fluids contained within a narrow pipe system suppilied by a jet
(Masteroppgave/UIS-TN-IDE/2013;, Master thesis, 2013)Industrial robots used to spray-paint vehicles use air to place the paint onto the object. The paint is let out at the end of the robot arm, while a stream of air is used to lead the paint towards its desired location. ... -
Modeling of turbidite systems in deep-water, thrust-related bivergent anticlines
(Masteroppgave/UIS-TN-IER/2019;, Master thesis, 2019-06)In deep-water fold and thrust belts, thrust-related folds that switch vergence along strike can occur and are considered to have a major impact on reservoir distribution (Higgins et al., 2009). Syn-sedimentary processes ... -
Modeling Patient Flow in an Emergency Department under COVID-19 Pandemic Conditions: A Hybrid Modeling Approach
(Peer reviewed; Journal article, 2022)Emergency departments (EDs) had to considerably change their patient flow policies in the wake of the COVID-19 pandemic. Such changes affect patient crowding, waiting time, and other qualities related to patient care and ... -
Modeling superior predictors for crude oil prices
(Journal article; Peer reviewed, 2017-06)A common perception in the literature is that oil price dynamics are most adequately explained by fundamental supply-and-demand factors. We use a general-to-specific approach and find that financial indicators are even ... -
Modeling synrift sediment infill patterns of synthetic normal faults
(Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2016-01)Previous studies of normal faulting and their control on sedimentation have largely focussed on geometrical infill patterns from a two dimensional perspective. In order to overcome this a series of 3D models have been ... -
Modeling Thermomechanical Stress with H13 Tool Steel Material Response for Rolling Die under Hot Milling
(Peer reviewed; Journal article, 2019)For the extreme pressure and temperature arising in the hot rolling process, thermomechanical (TM) models are used to predict the residual stresses on the surface of the die because a quantification of the TM stresses ... -
Modeling Viscosity of CO2 at High Temperature and Pressure Conditions
(Peer reviewed; Journal article, 2020-03)The present work aims at applying Machine Learning approaches to predict CO2 viscosity at different thermodynamical conditions. Various data-driven techniques including multilayer perceptron (MLP), gene expression programming ...