Faculty of Science and Technology: Nye registreringer
Viser treff 1761-1780 av 7367
-
Road Transportation Challenges in the Arctic
(Peer reviewed; Journal article, 2020)Despite all efforts to mitigate global warming, its rate and magnitude are still rising where transportation is considered to be an important contributor. In the Arctic regions however, unstable weather conditions, strong ... -
Numerical simulations of flow around two tandem wall-mounted structures at high Reynolds numbers
(Peer reviewed; Journal article, 2020)In the present study, the flow around two-dimensional (2D) square and trapezoidal wall- mounted structures in tandem on a horizontal flat wall has been simulated using two-dimensional Reynolds-averaged Navier-Stokes (RANS) ... -
Understanding the Importance of Efficient Visitor Flow within Tokyo Skytree
(Peer reviewed; Journal article, 2021)Tokyo Skytree is the tallest freestanding tower in the world. The tower is a popular tourist attraction with two observational decks at an altitude of 350 and 450 meters. This paper aims to understand the importance of the ... -
Experimental Evaluation of Handover Strategies in 5G-MEC Scenario by using AdvantEDGE
(Chapter, 2022)The 5G-MEC architecture increases the heterogene-ity and dynamicity of the available resources, presenting unique and competing challenges to researchers, network designers, and application developers. Recent studies ... -
Numerical Analysis of the Effect of Offshore Turbulent Wind Inflow on the Response of a Spar Wind Turbine
(Peer reviewed; Journal article, 2020)Turbulent wind at offshore sites is known as the main cause for fatigue on offshore wind turbine components. Numerical simulations are commonly used to predict the loads and motions of floating offshore wind turbines; ... -
CO2 methanation on hydrotalcite-derived catalysts and structured reactors: A review
(Peer reviewed; Journal article, 2020)CO2 methanation reaction has attracted renewed interest since the power-to-gas (PtG) concept emerged as a promising alternative for CO2 emission abatement using surplus renewable electricity. Although the reaction has been ... -
The missing link of Rodinia break up in western South America: A petrographical, geochemical, and zircon Pb-Hf isotope study of the volcanosedimentary Chilla beds (Altiplano, Bolivia)
(Peer reviewed; Journal article, 2020)The assembly of Rodinia involved the collision of eastern Laurentia with southwestern Amazonia at ca. 1 Ga. The tectonostratigraphic record of the central Andes records a gap of ∼300 m.y. between 1000 Ma and 700 Ma, i.e., ... -
Compaction and Fluid—Rock Interaction in Chalk Insight from Modelling and Data at Pore-, Core-, and Field-Scale
(Peer reviewed; Journal article, 2020)Water weakening is a phenomenon that is observed in high porosity chalk formations. The rock interacts with ions in injected water and additional deformation occurs. This important effect needs to be taken into account ... -
Automated Data Filtering Approach for ANN Modeling of Distributed Energy Systems: Exploring the Application of Machine Learning
(Peer reviewed; Journal article, 2020)To realize the distributed generation and to make the partnership between the dispatchable units and variable renewable resources work efficiently, accurate and flexible monitoring needs to be implemented. Due to digital ... -
Decarbonization of the Iron and Steel Industry With Direct Reduction of Iron Ore with Green Hydrogen
(Peer reviewed; Journal article, 2020)Production of iron and steel releases seven percent of the global greenhouse gas (GHG) emissions. Incremental changes in present primary steel production technologies would not be sufficient to meet the emission reduction ... -
Fault-Tolerant Control Based on Virtual Actuator and Sensor for Discrete-Time Descriptor Systems
(Peer reviewed; Journal article, 2020)This article proposes a fault-tolerant control (FTC) strategy based on virtual actuator and sensor for discrete-time descriptor systems subject to actuator and sensor faults. The fault-tolerant closed-loop system, which ... -
Study of the Performance of Natural Fiber Reinforced Composites for Wind Turbine Blade Applications
(Peer reviewed; Journal article, 2020)Availability of some form of energy is essential for human survival and social development. However, the way energy has been generated within the last century has brought forward the quest for generation of energy without ... -
Recent developments and trends in the friction testing for conventional sheet metal forming and incremental sheet forming
(Peer reviewed; Journal article, 2020)Friction is the main phenomenon that has a huge influence on the flow behavior of deformed material in sheet metal forming operations. Sheet metal forming methods are one of the most popular processes of obtaining finished ... -
Proteomics and lipidomics analyses reveal modulation of lipid metabolism by perfluoroalkyl substances in liver of Atlantic cod (Gadus morhua)
(Peer reviewed; Journal article, 2020)The aim of the present study was to investigate effects of defined mixtures of polycyclic aromatic hydrocarbons (PAHs) and perfluoroalkyl substances (PFASs), at low, environmentally relevant (1× = L), or high (20× = H) ... -
Economic analysis of BIPV systems as a building envelope material for building skins in Europe
(Peer reviewed; Journal article, 2020)The main purpose of this study is to evaluate the economic feasibility of the BIPV system as a building envelope material for the whole building skins. The paper is dealing with the lifecycle cost analysis (LCCA) of BIPV ... -
A new framework to identify and assess hidden assumptions in the background knowledge of a risk assessment
(Peer reviewed; Journal article, 2020)A risk assessment has a more or less subjective nature, as the analyst needs to make assumptions, analyse data, use models, and so on, to produce risk-related knowledge of the phenomena of interest. This background knowledge ... -
Viscosity Models for Drilling Fluids: Herschel-Bulkley Parameters and Their Use
(Peer reviewed; Journal article, 2020-10)An evaluation is presented of the practical usage of the Herschel-Bulkley viscosity model for drilling fluids. If data from automatic viscosity measurements exist, the parameters should be selected from relevant shear rate ... -
Effect of Lubrication on Friction in Bending under Tension Test-Experimental and Numerical Approach
(Peer reviewed; Journal article, 2020)This paper is aimed to determine the value of coefficient of friction (COF) at the rounded edge of the die in the sheet metal forming operations using the bending under tension (BUT) test. The experimental part of the ... -
Intelligent Colored Token Petri Nets for Modeling, Control, and Validation of Dynamic Changes in Reconfigurable Manufacturing Systems
(Peer reviewed; Journal article, 2020)The invention of reconfigurable manufacturing systems (RMSs) has created a challenging problem: how to quickly and effectively modify an RMS to address dynamic changes in a manufacturing system, such as processing failures ... -
Core-scale sensitivity study of CO2 foam injection strategies for mobility control, enhanced oil recovery, and CO2 storage
(Peer reviewed; Journal article, 2020)This paper presents experimental and numerical sensitivity studies to assist injection strategy design for an ongoing CO2 foam field pilot. The aim is to increase the success of in-situ CO2 foam generation and propagation ...