Vis enkel innførsel

dc.contributor.authorSætrevik, Anders Langeland
dc.date.accessioned2009-12-09T14:55:42Z
dc.date.issued2009
dc.identifier.urihttp://hdl.handle.net/11250/181947
dc.descriptionMaster's thesis in Industrial economicsen
dc.description.abstractToday there are three commonly used methods in the management of the integrity of a process plant: Reliability Centred Maintenance (RCM), Risk Based Inspection (RBI) and criticality analysis for maintenance purposes described in NORSOK Z‐008. All three methodologies work on the same underlying philosophy by combining probability of failure and consequence of failure with the intention to classify the equipment with regards to maintenance or inspection activities. This thesis explores the possibilities of combining these existing maintenance and inspection methods into one unified approach. The thesis makes a comparison study between key elements of the three methods. These key elements are: grouping and classification of equipment, the use of acceptance criteria, consequence of failure assessment, probability of failure assessment, risk evaluation and updating and evergreening of existing plans. The result of the comparison study shows that the similarities between the methods were many, both in configurations of the strategies and in how the results are used to govern further actions. The differences found were, in many cases, due to the fact that these methods deal with different equipment; some discrimination between equipment types may also need to be done in a unified approach. So, in light of the results, we can assume that a unified approach towards maintenance and inspection is feasible without losing vital aspects of any of the methods.en
dc.format.extent1587086 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoengen
dc.publisherUniversity of Stavanger, Norwayen
dc.relation.ispartofseriesMasteroppgave/UIS-TN-IØRP/2009en
dc.subjectrisikostyringen
dc.subjectmaintenanceen
dc.subjectinspectionen
dc.subjectrisk based inspectionen
dc.subjectreliability centered maintenanceen
dc.subjectNORSOK Z-008en
dc.titleDevelopment of an integrated inspection and maintenance strategyen
dc.typeMaster thesisen
dc.subject.nsiVDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572en


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

  • Studentoppgaver (TN-ISØP) [1409]
    Master- og bacheloroppgaver i Byutvikling og urban design / Offshore technology : risk management / Risikostyring / Teknologi/Sivilingeniør : industriell økonomi / Teknologi/Sivilingeniør : risikostyring / Teknologi/Sivilingeniør : samfunnssikkerhet

Vis enkel innførsel