Blar i Vitenskapelige publikasjoner (TN-IMBM) på tittel
Viser treff 107-126 av 442
-
Digitization Methods of Grinding Pins for Technological Process Planning
(Peer reviewed; Journal article, 2020)The paper presents different techniques for digitizing grinding pins and discusses the use of digitalized pins and the results of measurements in technological process planning (TPP), focusing on the challenges of the ... -
Directed laser deposition of super duplex stainless steel: Microstructure, texture evolution, and mechanical properties
(Peer reviewed; Journal article, 2023-04)Microstructure and texture evolution of directed-laser deposited super-duplex stainless-steel, in the as-received block, were characterized using light and electron microscopies and electron backscattered diffraction. ... -
Disc golf trajectory modelling combining computational fluid dynamics and rigid body dynamics
(Peer reviewed; Journal article, 2022)In the sport of disc golf, athletes utilize discs with various shapes to achieve their desired throws. Computational methods have the potential to give further insight into how the disc shape and throw parameters influence ... -
Distinguishing space groups by electron channelling: centrosymmetric full-Heusler or non-centrosymmetric half-Heusler?
(Peer reviewed; Journal article, 2020)X-ray emission under electron-channelling conditions is used to distinguish between a non-centrosymmetric half-Heusler and a centrosymmetric full-Heusler crystal. For TiCo1.5+xSn the space-group determination based on a ... -
Dual lidar wind measurements along an upstream horizontal line perpendicular to a suspension bridge
(Peer reviewed; Journal article, 2021)Remote wind sensing can complement traditional anemometry at a bridge site and contribute to an improved wind-resistant design of long-span bridges. This study examines wind lidar measurement data recorded along a ... -
Duplex steel welding in artic conditions – Correlation of welding parameters in relation to HISC
(Peer reviewed; Journal article, 2021)Duplex steel is an austenitic-femtic steel alloy commonly used in the offshore and subsea oil and gas industry. Duplex steel provides a unique combination of good mechanical properties and corrosion resistance in sweet and ... -
Dynamic Analysis and Extreme Response Evaluation of Lifting Operation of the Offshore Wind Turbine Jacket Foundation Using a Floating Crane Vessel
(Peer reviewed; Journal article, 2022)The jacket is the most widely-used fixed foundation for offshore wind turbines due to its superior strength and low installation cost in relatively deep waters. Floating crane vessels are commonly used to install jacket ... -
Dynamic analysis and validation of a multi-body floating wind turbine using the moving frame method
(Peer reviewed; Journal article, 2023)This research applies the moving frame method (MFM) to the multi-body dynamic analysis of an OC3 phase IV spar buoy with the NREL 5MW turbine. Further, it verifies previous results obtained through numerical comparisons ... -
Dynamic analysis of a two-rotor wind turbine on spar-type floating platform
(Peer reviewed; Journal article, 2021-07)The dynamic response of a two-rotor wind turbine mounted on a spar-type floating platform is studied. The response is compared against the baseline OC3 single-rotor design. Structural design shows how the two-rotor design ... -
Dynamic Analysis of Splash-zone Crossing Operation for a Subsea Template
(Peer reviewed; Journal article, 2022)Subsea templates are steel structures used to support subsea well components. Normally, offshore crane vessels are employed to install them to the target location on the seabed. Crossing the splash-zone during the lowering ... -
Dynamic analysis of spur gear with backlash using ADAMS
(Peer reviewed; Journal article, 2020)Gear tooth profile can deviate from its initial design shape and size as a result of increasing service time under time-varying load, introducing external agents like debris, overheating due to friction, wear, and in ... -
Dynamic design and analysis of subsea CO2 discharging flowline for cargo submarines used for CCS in low-carbon and renewable energy value chains
(Peer reviewed; Journal article, 2022)Developing offshore low carbon and renewable energy value chains to realize a net-zero energy future requires combining offshore renewable energy and carbon capture storage (CCS) solutions. The subsea shuttle tanker (SST) ... -
Dynamic response analysis of a catamaran installation vessel during the positioning of a wind turbine assembly onto a spar foundation
(Journal article; Peer reviewed, 2018-05-11)Installation of floating wind turbines is a challenging task. The time and costs are closely related to the installation method chosen. This paper investigates the performance of an efficient installation concept – a ... -
Effect of different source terms and inflow direction in atmospheric boundary modeling over the complex terrain site of Perdigão
(Peer reviewed; Journal article, 2023)Assessing wind conditions in complex terrain requires computational fluid dynamics (CFD) simulations incorporating an accurate parameterization of forest canopy effects and Coriolis effects. This study investigates how ... -
Effect of hydrogen on mechanical properties and fracture of martensitic carbon steel under quenched and tempered conditions
(Peer reviewed; Journal article, 2020)The change in the mechanical properties of tempered high strength carbon steel (AISI 4130) due to hydrogen embrittlement (HE) has been investigated using slow strain rate tensile tests (SSRT). The heat treatment processes ... -
Effect of Interference Size on Contact Pressure Distribution of Railway Wheel Axle Press Fitting
(Peer reviewed; Journal article, 2023)Mechanical couplings in engineering usually use interference fits to connect the shaft and hub. A railway wheel axle is a press fit that is connected by interference and can be subjected to bending stress. In loaded press ... -
The effect of laser surface melting on the retained austenite and wear properties of AISI D2 tool steel
(Peer reviewed; Journal article, 2021)In this study the effect of laser surface melting (LSM) on the amount of retained austenite, hardness and wear resistance of AISI D2 steel was investigated utilizing hardness test, X-ray diffraction (XRD), pin on disk wear ... -
Effect of Lubrication on Friction in Bending under Tension Test-Experimental and Numerical Approach
(Peer reviewed; Journal article, 2020)This paper is aimed to determine the value of coefficient of friction (COF) at the rounded edge of the die in the sheet metal forming operations using the bending under tension (BUT) test. The experimental part of the ... -
Effect of Pressing Parameters on the Quality of Joint Formation of Heat Exchanger Fins with the Base Plate
(Peer reviewed; Journal article, 2019)In this paper, the results of experimental and numerical studies on joining the thin fins to the thick base plate of a heat exchanger are presented. The elements of the heat exchanger were joined by using developed method ... -
Effect of SiO2 and SiO2/TiO2 hybrid nanoparticles on cementitious materials
(Peer reviewed; Journal article, 2021)In this paper, we report the effect of SiO2 nanoparticle solution on the properties of the neat industry and environmental cements. Moreover, the hybrid SiO2/TiO2 nanoparticles solution impact on the Portland G-class cement. ...