• Performing simulation study on drill string mechanics, Torque and Drag. 

      Chakraborty, Tanmoy (Masteroppgave/UIS-TN-IPT/2012;, Master thesis, 2012)
      In this thesis work, a simulation and monitoring study was carried based on operational data obtained from two wells. These are South Sangu-4 and Sangu-11, which are situated in block 16. From the study it was found out ...
    • Permeability evolution of chalk under different stress states 

      Ma, Shijia (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-15)
      This thesis reports the results obtained from triaxial tests on Kansas outcrop chalk flooded with inert NaCl brine. Permeability measurements are conducted at 50ºC under different stress states simulated by five test ...
    • Permeability modeling of Lavrans field 

      Niwaz, Ahmad (Masteroppgave/UIS-TN-IPT/2012;, Master thesis, 2012)
      Permeability has been calculated for three exploration wells from the “Smørbukk” field, from the mid – Norwegian Sea. Permeability from logs, cores and cross plots have been derived and compared with permeability from well ...
    • Permo-Triassic and Post-Rift Halokinesis in the Norwegian-Danish Basin 

      Gulyaeva, Ekaterina (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)
      The area of investigation is located in the Norwegian sector of the Norwegian-Danish Basin (NDB) and covers an area of ~20,000 km2 between the Stavanger Platform and the Central Graben. This basin is a Late Permian rift-basin, ...
    • Petrophysical characterization of the Lower Cretaceous clastic wedges in the northwestern Barents Sea 

      Rodriguez, Isabel (Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-06-15)
      The results of the petrophysical evaluation of four turbidite systems located along the flanks of the Hammerfest Basin, in the southwestern Barents Sea, are presented in this master thesis. These systems are the reservoir ...
    • Play based evaluation of the eastern margin of Nordland Ridge, Norwegian Sea. 

      Saxena, Prateek (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)
      The main objective of this study is produce a petroleum system evaluation of potential plays along the eastern margin of the Nordland Ridge. The area of study consists of two major tectonic structures; the Nordland Ridge ...
    • Plug and abandonment operations and tool positioning 

      Saad, Idrees (Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-13)
      With aging oil fields, the Norwegian petroleum authorities are focusing on Plug and Abandonment (P&A) plans. Therefore efforts are being made, by relevant authorities, to improve standards and procedures for the P&A ...
    • Plug and abandonment operations performed riserless using a light well intervention vessel 

      Valdal, May Bente Leifsen (Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-06-14)
      In a few years there will be a significant increase in wells that need to be permanently plugged and abandoned (PP&A). Statoil operates around 500 subsea wells on the Norwegian Continental Shelf (N.C.S), whilst there exist ...
    • Plug and Abandonment Technology Evaluation and Field Case Study 

      Halvorsen, Christer (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06)
      In the North Sea, the average field age is increasing and a large number of wells needs to be plugged and abandoned in the future. P&A is regarded as an operation with no financial returns and is associated with significantly ...
    • Plug and abandonment, milling operations and simulations 

      Randby, Marie (Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-13)
      During plug and abandonment, there can be a need for removing casing to ensure that a proper cement barrier can be set. The conventional method for doing this is by performing milling oper ...
    • Potential of evaporation for geothermal energy exploitation 

      Lysen, Christian (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-13)
      This master thesis investigates the potential of using heat pipes as geothermal heating systems for domestic purposes. The total electric energy consumption in Norway used for heating purposes is estimated to be as much ...
    • Pre/post-production uncertainty analysis applied on the Hyme field 

      Bratteli, Mats Betanzo (Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-06)
      The objective of this master thesis is to quantify how the estimated uncertainty, associated with the Hyme field, will change as more data becomes available. This will be done by identifying the key uncertainties and ...
    • Prediction of dispersions and emulsions by using LedaFlow Q3D 

      Grimsmo Busengdal, Henrik (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-15)
      Well streams in pipelines are often transported over relatively long distances. The well streams often consist of simultaneous flow of gas, oil and water. Oil and water affect each other by making emulsions, which influence ...
    • Preparation of Activated Carbon from Biomass for High Performance Supercapacitors 

      Azuatalam, Kingsley (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-15)
      Activated carbon was successfully synthesized from waste paper by physical, chemical and a combination of both activation procedures. The chemically activated carbon samples was achieved by using H3PO4 and KOH as agents. ...
    • Processing and analysis of Vertical Seismic Profile data acquired while drilling (VSP-WD) 

      Kreona, Angeliki (Masteroppgave/UIS-TN-IPT/2012;, Master thesis, 2012)
      A Vertical Seismic Profiling While Drilling (VSP-WD) survey method was used to acquire data for processing analysis. This survey carried out in West Cameron in Offshore Louisiana by Schlumberger in 2005. A seismic source ...
    • Processing techniques to enhance imaging of ultra-high frequency seismic data acquired with P-Cable technology 

      Storaas, Øystein (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-15)
      P-Cable seismic acquisition system is a rather new technology; developed through the past 20 years. Consequently, the use of P-Cable technology has been limited, although researchers still believe that further improvements ...
    • Production performance analysis of well with different inflow technologies 

      Kåsa, Nina Iren (Masteroppgave/UIS-TN-IPT/2011;, Master thesis, 2011)
    • Proper Cementing to Reduce Time and Cost 

      Saleh, Hakim Saaid (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)
      This work brings up some important aspects of cementing procedure with the aim of reducing WOC time, avoiding remedial cementing and referring to some new technologies regarding plug and abandonment. In the beginning, a ...
    • Provenance of the Upper Cretaceous Lange-Lysing deep-marine sandstone in the Norwegian Sea: with implication for reservoir quality. 

      Tegle, Kristina Waagbø (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06)
      The provenance and reservoir properties of Upper Cretaceous Lange-Lysing sandstone in the Norwegian Sea have been determined by using integrated whole-rock geochemical, petrographic and detrital zircon U-Pb age dating by ...
    • PSV sizing verification for Alvheim process equipment during gas blowby scenarios 

      Kvammen, Rune (Masteroppgave/UIS-TN-IPT/2011;, Master thesis, 2011)
      The EPCI (Engineering, Procurement, Construction and installation) contractor which delivered the PSVs to Alvheim states that the PSVs are sized to handle a gas blowby scenario. Marathon Norge AS does not hold any documentation ...