• A Study of Possible Approaches for Considering Well Abandonment in the Well Design Stage 

      Haukelid, Vlad (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-13)
      There are many fields on Norwegian Continental Shelf (NCS) that approach end of their design life. Based on feasibility studies, life of some fields is prolonged while it is shortened for others. Since early days there ...
    • A temperature model for Extended Reach Drilling applications 

      Langåker, Vebjørn (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-15)
      Ensuring precise estimation of temperature is a critical process for well planning and real-time drilling operations, especially for Extended Reach Drilling (ERD). Therefore, a temperature model has been developed to predict ...
    • Adaptive Observer Design for Linear Hyperbolic System in Managed Pressure Drilling 

      Kurnia, Hafiz (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06)
      Managed Pressure Drilling (MPD) is a drilling technology that has been developed to manage and control the downhole pressure in the well in order to minimize drilling-related problems. This technology uses a pressurized ...
    • Cementing Geothermal Steam Wells 

      Haavik, Inger Lill (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06)
      Cementing wells with severe temperatures and/or pressures has become a common matter over the years. Running casing and designing the cement job is very difficult with temperatures above 150°C (300°F) which is a common ...
    • Data Accuracy from Well Test Operations 

      Gundersen, Ida Stuksrud (Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-12-18)
      This master thesis presents a study on data accuracy from well test operations. All data measuring methods, except bottomhole and surface PVT sampling, is investigated for the accuracy related to procedure and equipment ...
    • Effect of Nano Additives on Friction in a Bentonite Water Based System 

      Forthun, Shirin Charlotte (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-13)
      This thesis will present relevant literature study and theory for the experimental and simulation parts. Several water based drilling fluids containing high and low concentrations of TiN, MoS2 and Graphene in nano-size ...
    • Effect of small amounts of surfactants on oil-water dispersion 

      Fateev, Gleb (Master thesis, 2014-06-16)
      The present work reports the study of oil-water dispersions in static conditions. All experiments were carried out with a mineral oil and tap water in glass beakers with mixing of the phases. Small amounts of non-ionic ...
    • How to apply a two-phase model from fluid mechanics to study cell migration mechanisms 

      Kjørslevik, Trygve Alexander Carlsen (Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)
      The classical Keller-Segel model of cell migration due to random motion and chemotaxis, has, as a result of its intuitive simplicity and ability to replicate key behavior of chemotactic populations, provided a foundation ...
    • Hydraulic calculations using discovery web for visualization 

      Strand, Erling (Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-15)
      Advanced real-time monitoring systems are useful tools for safe and cost effective well operation practices. As one moves into deeper water, higher pressure and higher temperature, the drilling operations only becomes more ...
    • Integration of modeling and drilling incident management of a real-time lab-scale autonomous drilling rig 

      Holsaeter, Andrew (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-29)
      The basis of this thesis is an attempt to design, construct, and implement a fully autonomous lab scale drilling rig with real time optimization and capable of drilling detection and subsequent mitigation. Two simplified ...
    • Investigation of gas composition on production performance of J-shaped gas-lift well 

      Putranto, Endiandika (Master thesis, 2014-06-16)
      The J-shaped gas-lift well showed complex dynamic phenomena. The downward inclination of the J-shaped well introduces periodic waves over time as a result of mixing gas and liquid. This behavior introduces periodic ...
    • P&A using PWC technique and verification of the plug 

      Erland, Sofie Stange (Master thesis, 2014-06-16)
      When a well is permanently plugged and abandoned (P&A), a plug has to be set over the entire cross section of the well. The conventional method to perform a P&A operation is to mill the casing and pull it to surface before ...
    • Reliability Based Casing Design 

      Eleonu, Ositadinma Tochi (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06)
      It is a well-known fact that wells are increasingly becoming extremely expensive and difficult to drill as well as develop due to increasing water depth, temperatures, and pressures. All these result in an increasing load ...
    • Study of a model for spontaneous imbibition as a mechanism for oil recovery in naturally fractured reservoirs 

      Heredia Garate, Antonio Jesus (Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-10)
      One of the principal recovery mechanisms in Naturally Fractured Reservoirs (NFRs) is spontaneous imbibition. Understanding the parameters affecting spontaneous imbibition is the first step to achieve optimum oil recovery ...
    • Utilization of Purpose-Built Jack-Up Units for Plug and Abandonment Operations 

      Spieler, Jon Oscar (Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-07)
      The oil and gas industry working on the Norwegian continental shelf have the past years increased the focus on decommissioning of fields, after several years with attention to increase and enhance oil recovery. The topic ...
    • Well control analysis in conventional and riserless reelwell method 

      Utheim, Marit (Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-10)
      The oil industry is nowadays facing several problems as hydrocarbon reserves are declining and challenging areas are forced to explore. Deepwater drilling is one of these challenging areas as increased target depth results ...
    • Well engineering simulation (WellPlanTM) challenges and uncertainties in drilling engineering 

      Vazquez Taboada, José (Student paper, others, 2014-05-20)
      The report work on this laboratory simulation, will be simulated a Drilling Operation to identify the challenges that this operation carries, and how to mitigated them. Nowadays, the high demand by Operators to drill ...