Blar i Master's theses (TN-IPT 2007-2017) på emneord "drilling fluid"
Viser treff 1-7 av 7
-
Application of thermo-mechanically treated drill cuttings as an alternative to bentonite in spud muds
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-05-22)Drill cuttings recovered after drilling with OBM today are treated and deposited at onshore facilities. The TWMA Company offers a new technology, which recovers drilled subsurface materials together with oil and water ... -
Automatic evaluation of drilling fluid properties during conventional and MPD operations
(Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-07-12)The primary barrier to maintain well integrity in drilling operations is the drilling fluid. With the current routines of evaluating the fluid properties and the increasingly use of automated and advanced drilling ... -
Cutting transport models and parametric studies in vertical and deviated wells
(Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2014-01-09)Field experience shows that the accumulation of cutting in a wellbore causes several drilling problems. These include an increase in torque and drag, which may limit drilling from reaching to a desired target formation. ... -
Effect of Nano silica in brine treated PAC/XC/ LV-CMC polymer Bentonite fluid system
(Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-06)In this thesis the performance of Nano silica in polymer based bentonite fluid system was analysed. Several combination of Nano with salt and polymer types were formulated and tested. The effect of temperature, salt, polymer ... -
Experimental investigation of the potential of UCA and NMR for the detection of particle sedimentation in drilling fluids
(Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-06-17)Both ultrasound and Nuclear Magnetic Resonance (NMR) have previously been investigated for the potential of monitoring barite sag in drilling fluids. The Ultrasonic Cement Analyzer (UCA) registers the speed of ultrasound ... -
MWCNT and SiO2 Nanoparticle Enhanced Drilling Fluid Formulation and Characterization: Experimental and Simulation studies
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2018-02-12)In recent years the application of nanotechnology has shown impressive results in improving the performance of drilling fluid, enhanced oil recovery and in cement. However, the research and development based on nanotechnology ... -
Study of Viscosity and Friction Factor of Nano Drilling Fluids along with Torque and Drag Reduction
(Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)Energy industries have been taking advantages from the recent developments of nanotechnology. Several revolutionary changes can be made in drilling industry with the help of nanotechnology. It has a capability to produce ...