Blar i Studentoppgaver (TN-IEP) på tittel
Viser treff 109-128 av 323
-
Effect of MWCNT on Duovis biopolymer based laboratory drilling: Experimental and Simulation studies
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)In recent years, nanotechnology have shown an improving performance on the properties of drilling fluid, enhanced oil recovery and in cement. The technology is proven in several other industries. However, the research ... -
Effect of nano-SiO2, nano-Al2O3, MWCNT and FA on properties of Portland G-class cement
(Master thesis, 2021)Cement is an important element in oil and gas wells, as it provides structural integrity and acts a barrier to prevent unwanted leakages in the well. According to NORSOK D-010 standard, properties of cement are required ... -
Effect of nanoparticles and elastomers on the mechanical and elastic properties of G-class Portland cement: Experimental and Modelling studies.
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06)Properly designed well structure in terms of load carrying capacity and appropriate materials used maintain the sustainability and the long-term structural integrity of the well. An important barrier for oil and gas wells ... -
Effect of Saw dust on the Bentonite and KCL based drilling fluids: Experimental and Simulation studies.
(Master thesis, 2023)Designing drilling fluids properly plays an extremely important role in effective and reliable drilling operations. Oil Based Muds (OBM) are significantly used for drilling operations as they provide better lubrication, ... -
Effect of scaling and mixing procedure on cement slurry and hardened cement
(Master thesis, 2022) -
Effect on cycle life with different pre-lithiation depths of silicon anode in Si/LFP full cell
(Master thesis, 2023)This study examines the impact of various pre-lithiation conditions on the cycling performance of a Silicon (Si) anode in Li-ion batteries (LIBs). A commercially available Si active material was utilized, and CR2032-type ... -
Effects of Nanoparticles (Al2O3 and TiO2), Fibers and Fly Ash on Cementitious and Non-cementitious Materials at Room Temperature and 80°C Curing Temperature: Experimental and Empirical Modelling Studies
(Master thesis, 2022)Cement constitutes undoubtedly one of the most important well barrier elements, in terms of maintaining well integrity by preventing undesired flow of reservoir fluid into the wellbore. NORSOK D-010 standard dictates that ... -
Effects of Potential Determining Ions and pH on the Wettability of Intermediate Wet Outcrop Limestone
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-13)The intent of this study is to determine if the wettability of slightly oil wet limestone can be shifted toward water wet using “Smart Water”. The theory of “Smart Water” in carbonates proposes that increasing the composition ... -
Effekt av SiO2 nanopartikler og Kvarts mikropartikler på den nylig formulerte geopolymeren: Eksperimentelle og modelleringsstudier
(Bachelor thesis, 2023)I olje- og gassindustrien brukes sement som en brønnbarrierekomponent. Studier av brønnintegritet på produksjons- og injeksjonsbrønner i Nordsjøen har vist at omtrent 11% av integritetsfeilene er relatert til sement. Dette ... -
Effekt av SiO2 og TiO2 nanopartikler på sementholdige materialer: Eksperimentelle og modelleringsstudier
(Bachelor thesis, 2021)Cement is one of the crucial well barrier elements in the oil well. The well barrier performances of cement depend on the cement composition and good cement job during placement. NORSOK D-010 defined the criterial for ... -
Emission Free North Sea: A Study of Alternative Solutions for Power Generation on Offshore Installations
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-15)As a contribution to the 2°C goal of the Paris Agreement, The Norwegian Oil and Gas Association aims to reduce their GHG emissions to 40% of the 2005 level by 2030 and to have zero emissions by 2050. Gas turbines producing ... -
En beskrivelse av ulike trykkontroll metoder
(Bachelor thesis, 2023)I industrien finnes det to hovedmetoder for håndtering av kick, og valg av metode avhenger i stor grad av selskapets prosedyrer. Derfor er det relevant å undersøke forskning som er gjort på området for å identifisere en ... -
Energibrønner
(Bachelor thesis, 2023)Det foreligger i dag et stort behov for å finne nye grønne energikilder som er bærekraftige. Vi trenger nye energikilder som ikke påvirker miljøet negativt og som i tillegg gir stabil tilførsel av energi gjennom hele året. ... -
Energibrønner
(Bachelor thesis, 2023)Det foreligger i dag et stort behov for å finne nye grønne energikilder som er bærekraftige. Vi trenger nye energikilder som ikke påvirker miljøet negativt og som i tillegg gir stabil tilførsel av energi gjennom hele året. ... -
ERD Wells & Drag Calculations
(Bachelor thesis, 2021)This thesis investigated Extended reach drilling (ERD), which is the term for drilling high-angle, long horizontal directional wells. ERD wells has had tremendous developments, as new technology continues to break worlds ... -
Estimation of the Free Rotating Hook Load for WOB Estimation
(Master thesis, 2022)Today’s drilling industry emphasizes safety and deeper drilling while reducing drilling costs. Low rate of penetration (ROP) and non-productive time are two main reasons for reduced drilling efficiency. Machine Learning ... -
Evaluation of asphaltene deposition during CO2 enhanced oil recovery
(Master thesis, 2021)Over the years carbon dioxide has been gaining immense attention. Being one of the main greenhouse gases, it contributes to the increment of the global temperature more and more significantly. Existing as a by-product of ... -
Evaluation of Casing Exit Setting Depth Criteria for Whipstock
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06)Baker Hughes GE has conducted several hundred whipstock operations over the last years on the NCS with a high success rate. This work will go into detail on some of the operations that were less successful, particularly ... -
Evaluation of umbilical-less subsea operations
(Master thesis, 2023)The oil and gas industry are always seeking new technologies and ideas to lower the Health, Safety and Environment (HSE) risk, while also enhancing their operations. There is also a pressure from the governments that oil ... -
Experimental Analysis of Multi-phase flows in orifice
(Master thesis, 2022)In order to understand the behavior of multi-phase flow through orifices in horizontal pipes, an experimental approach is applied that utilizes the available flow rig in the multi-phase flow laboratory at the University ...