Blar i Studentoppgaver (TN-IEP) på tittel
Viser treff 88-107 av 323
-
Determination of steel/cement friction coefficient
(Master thesis, 2023)Two different experimental approaches have been used to determine the kinetic coefficient of friction between carbon steel and concrete made of API class G well cement mixture. First experimental setup consists of sliding ... -
Developing a methodology for generating an influx management envelope in MPD operations.
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-12)In addition to enhancing drilling efficiency and safety, Managed Pressure Drilling (MPD) offers the potential for vast improvements in the influx handling process. Some of today's MPD technologies are designed to detect ... -
Development and Characterization of a Pressure Transmitting Sag Prevention Gel Pill
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-08)Barite sag is a risky phenomenon to manage as particle settlement occurs in all types of drilling fluids containing weighting agents’ materials to achieve density. This leads to the phenomenon of sag which is known to ... -
Digital Image Analysis for Petrophysical Evaluation
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)Economic feasibility of any field development largely depends upon its reservoir storage and flow capacity. Porosity, saturation and permeability are important parameters to determine the type and volume of hydrocarbons ... -
Digital Twin Development for an In-House Drilling Simulator
(Master thesis, 2021)Digitalization is a process that has become inevitable due to the broad economic benefits brought to its assets. The automation and digitalization of the drilling process have advanced greatly throughout the years. The ... -
Direct air capture of CO2 by adsorption on zeolites
(Master thesis, 2021)Greenhouse gases have become a consequential global issue. Carbon dioxide (CO2) is the most abundant greenhouse gas, that is significantly contributing to disastrous changes in the global climate. The escalating levels of ... -
Directional Drilling: Trajectory Design and Position Uncertainty Study for a Laboratory Drilling Rig.
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-19)This thesis investigates how trajectory optimisation and position uncertainty calcu- lations can be performed on a laboratory drilling rig. The improvements made are to be used on the drilling rig designed and ... -
Drill-in fluids and hydraulic fracturing characterization of lost circulation material
(Master thesis, 2021)Sodium formate and Potassium formate-based drill-in fluids were designed and characterized at the UIS lab. Moreover, Cesium/Potassium- based drill-in fluids were formulated and characterized its properties along with its ... -
Drilling and Well - Valve usage in changing environment
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)Since the oil price experienced its drastic fall summer 2014, a leaner and more cost effective oil and gas production have been an important element for oil and gas companies. This is why this paper in cooperation with ... -
Drilling in karstified carbonates
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-14)Karst cavities and depressions are collectors of various minerals, such as oil and gas, drinking and industrial waters, bauxite, various ores, phosphates, diamonds, gold and tin stone, refractory clay and many others. Of ... -
Drilling Optimisation on the Norwegian Continental Shelf: Opportunities in Well Design Practice
(Master thesis, 2018-04-17)The purpose of this thesis was to attempt to provide evidence that Norway’s drilling fraternity is long overdue for a re-think in the way it drills wells. In so doing, the author has chosen to focus on slim well drilling ... -
Dry reforming of methane over Ni-Fe bimetallic catalyst
(Master thesis, 2021)Our climate is changing for the worse as the concentration of greenhouse gases in the atmosphere increases. Climate change is one of the most important challenges of our time. Emissions of greenhouse gases (GHG) have been ... -
Dynamic Acceptance Criteria for Periodic Testing of Downhole Safety Valves
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-15)Downhole Safety Valves (DHSVs) are periodically leak tested as part of the preventative maintenance program on an oil and gas producing facility. The last couple of years, the oil and gas industry on the Norwegian Continental ... -
Dynamic modelling of ram BOP
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018)As the closing time of Blowout Preventer rams is safety critical, this thesis proposes a dynamic model to calculate the closing time of a ram Blowout Preventer. The thesis work includes guidelines to recreate such a model ... -
ECD management and monitoring using High-Speed Wired Drill Pipe Telemetry in a Norwegian Offshore Well
(Master thesis, 2023)Mud weight, or as referred to in this paper as Equivalent Circulating Density, is a crucial element in sustaining wellbore stability and preventing drilling-related issues and has historically been difficult to monitor, ... -
Effect of 15nm SiO2 Nanoparticles on Enhanced Oil Recovery and Drilling Fluid: Experimental and Simulation studies
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)Nanotechnology is among the most remarkable technology in the modern science, and due to unique and unrevealed abilities the tiny size of particles possesses, this technology has also been questioned in order to be worthy. ... -
Effect of Al2O3 nanoparticle, Silica Powder microparticle, and Fibers on the newly formulated geopolymer: Experimental and Modelling Studies.
(Master thesis, 2023)When the productivity of a reservoir becomes uneconomical, the final fate of the well is to be plugged and abandoned. NORSOK D-10 defines the well integrity criteria and sets criteria for cement properties to reduce the ... -
Effect of Boron nitride (BN) and surface modified BN on the properties of laboratory water-based drilling fluid formulated in Duovis/XG polymers: Experimental and Simulation studies.
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)Properly designed drilling fluid is one of the key factors for efficient and safe drilling operations. Oil-based muds (OBMs) are more extensively used to drill in deeper and harsher environments, where the fluid stability ... -
Effect of crude oil adsorption and asphaltene precipitation on sandstone wettability
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06)Wettability is an important property for oil recovery. It affects capillary pressure and controls fluids, location, and flow in the reservoir. By an increase in capillary pressure (due to increased water wetness), previously ... -
Effect of fluid forces on drill string mechanics
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-14)In the present situation of rig operations, the procedure of drill string design is crucial for the successful enlargement of any kind project. Besides of a pipe reliable material, the hoisting system of the rig must be ...