Blar i Studentoppgaver (TN-IEP) på tittel
Viser treff 244-263 av 323
-
Prediction of mechanical friction forces on casing being run
(Bachelor thesis, 2023)In recent years, advancements in drilling technology have led to increasingly complex wellbore trajectories, particularly in the case of horizontal wells and extended reach wells (ERWs). This complexity necessitates highly ... -
Predictive accuracy of data-driven solutions to the transient response of the drilling system
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-07-15)One of the utmost desires of the drilling industry is full drilling automation to minimize well construction cost, optimize well performance and many other advantages. Dynamical system modeling and control of complex systems ... -
Prevention of loss of drilling fluids and formation damage when drilling through high permeability formations
(Bachelor thesis, 2023)In order to avoid kicks and the potential for a well blowout, it is necessary to maintain the drilling fluid pressure above the pore pressure of the formation. However, doing so may result in fluid loss due to the fluid ... -
Probabilistic Portfolio Modeling in Python
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-14)The portfolio selection problem has been known for centuries. However, Markowitz (1952) was the first to introduce a robust framework for optimized portfolios on financial markets. Later this approach was applied in the ... -
Project Portfolio Optimization in a Changing Energy Landscape
(Master thesis, 2021)Portfolio analysis and optimization has for the past several decades been applied in the oil & gas industry for asset allocation with the goal of maximizing corporate value creation. More recently, the traditional task of ... -
Project Portfolio Optimization in a Changing Energy Landscape
(Studentoppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-15)Portfolio analysis and optimization has for the past several decades been applied in the oil & gas industry for asset allocation with the goal of maximizing corporate value creation. More recently, the traditional task of ... -
Pump pressure manipulation during MPD connection
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-14)Over time the remaining oil prospects are becoming harder to drill and managed pressure drilling is a tool that can be used to reach target depth in depleted reservoirs or similar narrow margin scenarios. In any narrow ... -
Qualification of the Cementitious Material Rock-based Geopolymer in Permanent Plug & Abandonment
(Master thesis, 2022)When an oil & gas well proves not to be economically favourable anymore, or is technically inviable, the well has served its life and are due to be shut-down and sealed, also referred to as permanent plug & abandonment. ... -
Reactive flow in chalk at reservoir temperature – Experiment and simulation
(Bachelor thesis, 2021)This thesis seeks to study how 0.219 M MgCl2 brine flooded through chalk cores at reservoir temperatures will chemically react when flooded through at various flowrates. We used two different chalk cores. The cores were ... -
REAL-TIME DATA DRIVEN ROP AND TORQUE MODELLING AND OPTIMIZATION USING MACHINE LEARNING
(Master thesis, 2021)Obtaining the maximum rate of penetration (ROP) is one of many techniques to reduce cost and Non-Productive Time (NPT) in drilling wells. Many parameters affect ROP, including hole cleaning, tooth wear, etc. The study was ... -
Recent developments in hole cleaning technology in deviated well bores for geothermal and petroleum
(Bachelor thesis, 2022)This paper is looking on recent developments in hole cleaning technologies and how recent advancements can be used to aid efficient hole cleaning in deviated wells. Successful hole cleaning relies upon integrating optimum ... -
Relative Permeability and Capillary Pressure Estimation from Core-flooding Experiments accounting for Capillary End Effects.
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-07)Abstract Relative Permeability and Capillary Pressure Estimation from Core-flooding Experiments studying Capillary End Effects Relative permeability (Relperm) and capillary pressure (Cp) are fundamental input ... -
Reliability based casing design
(Bachelor thesis, 2022)Working stress design is today the most used method for casing design. This method is easy to learn and uses enough safety factors to provide a safe design. Reliability based design is a stochastic approach to casing design ... -
Reliability-Based Casing Design with Focus on an APB Collapse Scenario
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)In times of unstable oil price, optimization related to casing and tubing design becomes more important than ever. Reducing cost and at the same time ensuring reliable and safe drilling and completion installations becomes ... -
Repeated push-out testing of expansive cement plug in casing
(Bachelor thesis, 2023)In the petroleum industry, cement plays a crucial role during well operations as it connects the casing pipes to the formation and forms a seal that prevents fluid migration, ensuring well integrity. The ability of the ... -
Repeated push-out testing of expansive cement plug in casing
(Bachelor thesis, 2023)In the petroleum industry, cement plays a crucial role during well operations as it connects the casing pipes to the formation and forms a seal that prevents fluid migration, ensuring well integrity. The ability of the ... -
Reservoir simulation of measurements with an innovative tool to detect oil-water-contact
(Master thesis, 2022)Hydrotell is developing a tool which will measure the pressure difference between oil phase and water phase in reservoirs with hydraulic conductivity. This pressure difference is then used to locate the free water level ... -
Residual Gas Impact on Water Influx and Recovery Potential
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020)Whereas residual gas has been studied by many researchers, there has been little discussion about paleo residual gas. When encountered in a well, these dead gas columns are usually immobile, and the well is considered dry. ... -
Revealing the Effect of Superplasticizers on Viscosity and Yield Stress of Geopolymers
(Bachelor thesis, 2022)Ordinary Portland cement has for a long time been the prime material used in well cementing, zonal isolation and permanent well abandonment. Cement is considered a necessity in the oil and gas industry for providing zonal ...