A new crack spacing model for reinforced concrete specimens with multiple bars subjected to axial tension using 3D nonlinear FEM simulations
Peer reviewed, Journal article
Published version
Permanent lenke
https://hdl.handle.net/11250/2827304Utgivelsesdato
2021-10Metadata
Vis full innførselSamlinger
Originalversjon
Naotunna, C.N., Samarakoon, S.M.S.M.K., Fosså, K.T. (2021) A new crack spacing model for reinforced concrete specimens with multiple bars subjected to axial tension using 3D nonlinear FEM simulations. Structural Concrete 10.1002/suco.202100025Sammendrag
Crack spacing is a governing parameter in widely used crack width calculation models. Axial tensile experiments are conducted to examine the crack spacing behavior of reinforced concrete specimens with multiple reinforcement bars. To reduce the time, cost, and labor of the experiments, nonlinear finite element simulations are widely used. In this study, 3D non-linear finite element simulation models have been developed with the smeared cracking approach to predict the average crack spacings. These models are calibrated and validated using both the experiment conducted by the authors and an experiment given in the literature. The governing crack spacing parameters have been identified as concrete cover thickness and clear distance between tensile bars. After conducting a series of 3D nonlinear finite element method simulations with the calibrated model, an equation is developed to predict the average crack spacings using multiple linear regression analysis. The validity of the proposed crack spacing equation has been checked with 18 recent experimen tal results in the literature. The proposed crack spacing equation gives a good agreement with the results of these experiments.