Vis enkel innførsel

dc.contributor.authorBravo, Miguel
dc.contributor.authorde Brito, Jorge
dc.contributor.authorEvangelista, Luis
dc.date.accessioned2023-01-10T12:51:54Z
dc.date.available2023-01-10T12:51:54Z
dc.date.created2017-10-17T15:09:35Z
dc.date.issued2017
dc.identifier.citationBravo, M., de Brito, J., & Evangelista, L. (2017). Thermal performance of concrete with recycled aggregates from CDW plants. Applied Sciences, 7(7), 740.en_US
dc.identifier.issn2076-3417
dc.identifier.urihttps://hdl.handle.net/11250/3042338
dc.description.abstractThis investigation intends to analyse the thermal performance of concrete with recycled aggregates (RA) from construction and demolition waste (CDW) collected from several locations in Portugal. A total of 17 concrete mixes were analysed by means of thermal conductivity tests. Firstly, the composition and characteristics of the aggregates (natural and recycled) used in the production of the concrete mixes were analysed thoroughly, by means of several physical and chemical tests. Later, in order to evaluate the thermal behaviour of the mixes, several tests were performed and their results analysed, both on the fresh-state (slump with the Abrams cone test, density and air content) and the hardened state (compressive strength and thermal conductivity). The analysis of the thermal behaviour showed that the use of RA improves the thermal performance of the concrete mixes. The extent of this change was shown to be quite variable depending on the origin of the RA used.en_US
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleThermal performance of concrete with recycled aggregates from CDW plantsen_US
dc.title.alternativeThermal performance of concrete with recycled aggregates from CDW plantsen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.rights.holderThe authorsen_US
dc.subject.nsiVDP::Teknologi: 500en_US
dc.source.volume7en_US
dc.source.journalApplied Sciencesen_US
dc.source.issue7en_US
dc.identifier.doi10.3390/app7070740
dc.identifier.cristin1505272
cristin.unitcode217,8,5,0
cristin.unitnameInstitutt for maskin, bygg og materialteknologi
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal