Blar i Faculty of Science and Technology på tittel
Viser treff 6735-6754 av 7059
-
Utilization of specialized vessel for selective offshore services - a feasibility study
(Masteroppgave/UIS-TN-IØRP/2016;, Master thesis, 2016-06)This master ́s thesis is based on a case study with the main objective of evaluating the feasibility of a new concept, and further to assess whether the concept may have been a preferred solution among customers. The ... -
Utilization of synthetic diamonds for cutting purposes in explosive atmospheres
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Modifications in the process industry are quite common. For many of these modifications cutting of existing equipment and structure will be a central activity. The abrasive diamond wire cutting technology is adopted from ... -
Utilize GitOps for Smart Grid Security Lab
(Master thesis, 2022)This thesis will provide an installation of a self-managed, on-premise Kubernetes platform for SINTEF's Smart Grid Security Lab, running a network simulator application called Network Simulator verion 3 (NS-3). The solution ... -
Utilizing down hole data, acquired by a multiple sensor down hole tool, to determine the PDC bit wear state.
(Masteroppgave/UIS-TN-IPT/2008;, Master thesis, 2008)By using real-time data from INTEQ`s CoPilot Real-Time Drilling Optimalization a search for dependable indications of the degree of the bit wear was done. This would improve decision making procedures for when to pull the ... -
Utilizing machine learning algorithms in the ensemble-based optimization (EnOpt) method for enhancing gradient estimation
(Master thesis, 2022)High or even prohibitive computational cost is one of the key limitations of robust optimization using the Ensemble-based Optimization (EnOpt) approach, especially when a computationally demanding forward model is involved ... -
Utilizing multiple criteria decision-making optimization methods to machine LM25Al/VC material under electro-discharge machining processes
(Peer reviewed; Journal article, 2023)In this work, sparking electro-discharge machining (EDM) process parameters are optimized by using multiple criteria decision-making (MCDM) methods. The work piece utilized for the investigation was LM25 aluminum alloy ... -
Utilizing students' feedback to ensure quality in teaching and learning: A lesson from covid-19
(Peer reviewed; Journal article, 2023)In this article we investigate the impact of COVID-19 on teaching quality and student active teaching. The data used for the analysis is from more than 4,000 students at the University of Stavanger, collected for the Study ... -
Utilizing Zirconium MOF-functionalized fiber substrates prepared by molecular layer deposition (MLD) for toxic gas capture and chemical warfare agent degradation
(Peer reviewed; Journal article, 2021-09)Metal–organic frameworks (MOFs) are a class of porous organic-inorganic solids extensively explored for numerous applications owing to their catalytic activity and high surface area. In this work MOF thin films deposited ... -
Utmattingsberegning for vindturbinfundament på løsmasser
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Denne oppgaven omhandler en sammenligning av utmattingsberegninger for vindturbinfundament ut fra standardene DNV-OS-C502 og NS-EN 1992-1-1:2004. Oppgaven baseres på vindturbinene i Høg-Jæren Energipark. Før selve ... -
Utsira Nord Floating Wind farm – Optimalisation of marine operations related to inter-array cable installation.
(Master thesis, 2023)The offshore wind industry is experiencing significant growth, with wind farms expanding in size, capacity, and moving to more challenging locations. However, cable faults remain a major concern, particularly during the ... -
Uttesting og validering av metoder for derivatisering og analyse ved hjelp av GC-EI/NCI-MS av tyrosin og nitrotyrosin.
(Masteroppgave/UIS-TN-IMN/2015;, Master thesis, 2015-06-12)3-Nitrotyrosin (3-NT) kan være en mulig biomarkør for å måle nitro-oksidativt stress, og det er derfor av interesse å etablere en metode for å måle konsentrasjonen i humant plasma. 3-NT blir produsert in vivo ved nitrering ... -
Utvikle en mikrokontrollerbasert plattform for arbeid med reguleringsteknikk og autonom kjøring
(Bachelor thesis, 2022)This report covers setting up a development system for embedded development for microcontrollers and Linux Embedded SBC systems. And, the development and testing of a microcontroller-based platform that can be used for ... -
Utvikling av ansiktsgjenkjenningssystem for bruk på NAO robot
(Masteroppgave/UIS-TN-IDE/2016;, Master thesis, 2016-06-15)The main objective of this thesis was to implement a demonstration behaviour for the NAO robot, with focus on face recognition. To achieve this, a complete framework for face recognition that is capable of real-time ... -
Utvikling av anskaffelsesstrategier
(Masteroppgave/UIS-TN-IØRP/2010;, Master thesis, 2010)Anskaffelser utgjør den største kostnaden til en bedrift, og er dermed den største kilden til kostnadsreduksjoner. Det er derfor svært viktig å sørge for en effektiv strategi for anskaffelser av varer og tjenester. I ... -
Utvikling av autonom flyter
(Bachelor thesis, 2023)Denne bacheloroppgaven tar for seg utvikling av autonom flyter, altså årets AUV. Oppgaven til flyteren i årets MATE -konkurranse er å flyte opp og ned i et 4 m dypt basseng to ganger. Mellom hver gang flyteren kommer opp ... -
Utvikling av autonom flyter
(Bachelor thesis, 2023)Denne bacheloroppgaven tar for seg utvikling av autonom flyter, altså årets AUV. Oppgaven til flyteren i årets MATE -konkurranse er å flyte opp og ned i et 4 m dypt basseng to ganger. Mellom hver gang flyteren kommer opp ... -
Utvikling av autonom flyter
(Bachelor thesis, 2023)Denne bacheloroppgaven tar for seg utvikling av autonom flyter, altså årets AUV. Oppgaven til flyteren i årets MATE -konkurranse er å flyte opp og ned i et 4 m dypt basseng to ganger. Mellom hver gang flyteren kommer opp ... -
Utvikling av en teinehaler med kraftblokk for manuell drift
(Bachelor thesis, 2022)I denne oppgaven har man utviklet en teinehaler med manuell drift for hobbyfiskere med inspirasjon fra Northlift LH-300[1]. For å kartlegge behov i markedet ble det valgt å bruke markedsundersøkelse. Gjennom produktutvik ... -
Utvikling av en teinehaler med kraftblokk for manuell drift
(Bachelor thesis, 2022)I denne oppgaven har man utviklet en teinehaler med manuell drift for hobbyfiskere med inspirasjon fra Northlift LH-300[1]. For å kartlegge behov i markedet ble det valgt å bruke markedsundersøkelse. Gjennom produktutvik ... -
Utvikling av et nytt system til vurdering av kompromitteringsindikatorer
(Bachelor thesis, 2021)Denne oppgaven handler om utviklingen av et nytt system til innhenting og vurdering av kilder til kompromitteringsindikatorer (IP-adresser, domener eller andre kjennetegn til at en enhet muligens har blitt kompromittert ...