Blar i Faculty of Science and Technology på tittel
Viser treff 981-1000 av 7037
-
Cardiac Structure and Function in Epilepsy Patients with Drug-Resistant Convulsive Seizures
(Peer reviewed; Journal article, 2022)High frequency of convulsive seizures and long-lasting epilepsy are associated with an increased risk of sudden unexpected death in epilepsy (SUDEP). Structural changes in the myocardium have been described in SUDEP victims. ... -
Cascade analysis of a floating wind turbine rotor
(Journal article; Peer reviewed, 2014)Mounting a wind turbine on a floating foundation introduces more complexity to the aerodynamic loading. The floater motion contains a wide range of frequencies. To study some of the basic dynamic load effect on the ... -
Cascade control on the Quanser Aero
(Master thesis, 2022) -
A case study of offshore wind turbine positioning optimization methodology using a novel multi-stage approach
(Peer reviewed; Journal article, 2022)This investigation maximize the annual energy production (AEP) of a wind farm’s layout at a specific site using a novel multi-stage approach. The downstream wind turbines’ energy production decreases due to the reduced ... -
Case Study on Lean Manufacturing
(Master thesis, 2022)Technological companies are struggling to keep competing in the global market. Customers have higher expectations now that an efficient and high-quality product is no longer sufficient. For example, Laerdal has to offer ... -
A Case Study on Topology Optimized Design for Additive Manufacturing
(Journal article; Peer reviewed, 2017-12)Topology optimization is an optimization method that employs mathematical tools to optimize material distribution in a part to be designed. Earlier developments of topology optimization considered conventional manufacturing ... -
Case study on topology optimized design for additive manufacturing
(Peer reviewed; Journal article, 2019-10)Additive Manufacturing (AM), also known as rapid prototyping, rapid manufacturing, layer manufacturing and three-dimensional printing, represents one of the most promising aspects of manufacturing for highly complex ... -
A case study on use of 3D scanning for reverse engineering and quality control
(Peer reviewed; Journal article, 2021-03)Reverse engineering is needed to acquire knowledge of design that is lost, obsolete or withheld. Techniques have evolved from manual measurements, to utilizing the possibilities that lie within 3D scanning technologies. ... -
Case Study: Root Cause Analysis at Altus Intervention
(Bachelor thesis, 2021)This thesis carries out a case study of Altus Interventions Root Cause Analysis, focusing on the reporting program Synergi and the methodology surrounding it. The central thesis objective is to map the current methodology ... -
Cases of real-life policies related to risk: how can they enhance risk analysis and risk science
(Peer reviewed; Journal article, 2022)Policies on risk constitute a core topic of risk analysis and risk science, and it is common at risk conferences to present real-life cases of such policies, for example related to the handling of climate change and ... -
Casestudie - Forretningsanalyse av Geomec Engineering
(Masteroppgave/UIS-TN-IØRP/2016;, Master thesis, 2016-07-13)Bedrifter som går inn i nye markeder med nye produkter, utsetter seg for en veldig høy grad av risiko. Samfunnsøkonomisk er man avhengig av innovasjonen disse selskapene bidrar med. Det er derfor viktig å forstå ... -
Casestudie av væske/vann-varmepumpe
(Bachelor thesis, 2021)Oppgaven tar utgangspunkt i en enebolig lokalisert i Stavanger, som i forbindelse med rehabilitering, installerte en væske/vann-varmepumpe. Det spesielle med dette anlegget er at varmeenergien hentes fra en kuldebærer, ... -
Casing design evaluation for water injectors at Valhall
(Masteroppgave/UIS-TN-IPT/2009;, Master thesis, 2009)The Valhall field is the largest field that BP operates on the Norwegian Continental Shelf, and is one of the most well known high porosity chalk fields in the Southern part of the North Sea. During many years of oil ... -
Casing wear in multilateral wells
(Masteroppgave/UIS-TN-IPT/2011;, Master thesis, 2011) -
Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum
(Master thesis, 2022)Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ... -
Catalytic conversion of CO2 to methanol over Cu/Zn/Al catalysts promoted with cerium and lanthanum
(Master thesis, 2022)Carbon dioxide is one of the most prominent greenhouse gases, and the rise in its emissions is causing an increase in the world’s temperature, which can have catastrophic effects if it is not controlled. Governments and ... -
Catalytic conversion of CO2 to methanol via CO2 hydrogenation : An investigation of metal oxide promoted catalysts
(PhD thesis UiS;574, Doctoral thesis, 2021-02)CO2 hydrogenation to methanol is a promising process for converting renewable energy into valuable fuels and chemicals, which can combat the emissions of greenhouse gases associated with the use of fossil resources. ... -
Catalytic hydrogenation of CO2 to methanol over In-promoted Cu/ZnO/Al2O3 derived from hydrotalcite-like precursors
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)Carbon dioxide emissions present a threat on a global level, driving governments and the scientific society to search for sustainable solutions to ease the effects of climate change. Carbon utilization offers a potentially ... -
Categorising offshore wind turbine installations, and investigating the weather impact during installations.
(Masteroppgave/UIS-TN-IDE/2018;, Master thesis, 2018-06)Categorising offshore wind turbine installations, and investigating the weather impact during installations. -
Causal Inference of Interwell Connectivity
(Master thesis, 2021)Interwell connectivity is a measure of the degree to which information is translated between wells in a reservoir. The translated information may include changes in pressure, fluid flow, or other physical properties. This ...