Combining multilateral with IWS completion
Master thesis
View/ Open
Date
2013Metadata
Show full item recordCollections
- Studentoppgaver (TN-ISØP) [1410]
Abstract
Intelligent well systems are installed in production or injection wells, to increase the total amount of produced hydrocarbons. An intelligent well system has the advantages of being able to set different choke openings, using hydraulic operated sleeves to regulate the flow of produced or injected fluids.
The procedure of operating the choke from surface without the use of any intervention work, is both economical and less time consuming. Combining the efficiency of intelligent well systems and down hole monitoring systems, such as pressure and temperature gauges, allows for production optimisation. If the down hole monitoring system also is fitted with a multiphase flow meter, surface test separators could be unnecessary.
Multilateral wells are used to reach several pay zones, either within the same reservoir or in different smaller reservoirs. A multilateral well is a single bore well, at the surface, with one or several branches going out from the main bore.
This method of drilling is economical and less time consuming. The equipment costs are lower, due to the need for only one wellhead, less casing costs, lower rig charge etc. Seeing as one only have to drill one main bore, as opposed to drilling separate wells where all wells must be drilled from the seabed, the method is also time saving.
Combining these two solutions, the well will produce from several zones in different reservoirs into one main bore. The production can be controlled and regulated for each zone continuously.
This thesis will describe the equipment used in a combined intelligent well and multilateral solution.
Description
Master's thesis in Industrial economics