Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 1235-1254 av 1731
-
Overview study on challenges of additive manufacturing for a healthcare application
(Peer reviewed; Journal article, 2021)Additive manufacturing is a rapidly evolving manufacturing technology bringing numerous and wide opportunities for the design team involved in the process by creating intricate and customized products with saving labor, ... -
Package Responsible Engineering
(Master thesis, 2022)Mechanical Packages Procedure According to NORSOK Requirement -
Parameter optimization in additive manufacturing (3D printing) for optimal mechanical and structural performance
(Master thesis, 2023)This master thesis explores the optimization of parameters in resin-based 3D printing to enhance mechanical and structural performance. The main problem was the development of residual stresses in the polymer resin during ... -
Parameter study of the effect of boulders on pipeline free span sections
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013-06-17) -
Parametric study of different unbonded tendon layouts in pre-stressed concrete flat plates
(Peer reviewed; Journal article, 2020-11)Post-tensioned unbonded tendons are widely used in fat slabs/plates when there is a demand for large span lengths, durable tendons and a reduction in the weight of structure. For post-tensioned fat slab/plates, diferent ... -
Parametrisk analyse av fagverksbruer i tre: Optimalisert materialbruk med redusert karbonavtrykk
(Master thesis, 2021)Behovet for overgangsbruer i Norge øker i takt med at flere nye motorveier bygges. Norske overgangsbruer er i all hovedsak utført i betong, og kun et fåtall av dem er trebruer. Samtidig blir klimaet viktigere og flere ... -
Parametrization of Steel Lazy Wave Riser Configuration for Fatigue Considerations at the Touch Down Point
(Master thesis, 2022)With the advancement of technologies, deepwater oil and gas exploration has shown promising results worldwide. Production risers are integral in offshore hydrocarbon exploration because they transfer oil and gas from the ... -
Passive heave compensation of heavy modules
(Masteroppgave/UIS-TN-IKM/2008, Master thesis, 2008)New subsea technology has increased size and weight of installed modules significantly. This thesis looks at heavy module installation from barge, through moonpool with use of passive heave compensation. An installation ... -
Pålitelighetsutfordringer ved aldrende bruer
(Master thesis, 2014-06-16)Oppgaven her er delt inne i tre deler som er potensielle problemer for aldrende konstruksjoner. Disse er: - Kapasitets- og pålitelighets-analyse - Utmatting - Tilstandskontroll og tidsavhengige skademekanismer Det er ... -
Pedestrian Wind Comfort Assessment Using Computational Fluid Dynamics Simulations With Varying Number of Wind Directions
(Peer reviewed; Journal article, 2022-07)The construction of a building inevitably changes the microclimate in its vicinity. Many city authorities request comprehensive wind studies before granting a building permit, which can be obtained through Computational ... -
Pendulum impact test of reinforced concrete structure
(Master thesis, 2021)Floating offshore concrete structures are vulnerable to collisions with ships, and the likelihood of accidents increase with increasing numbers of structures. Current design codes are not accurate for impact short duration ... -
Pendulum impact test of reinforced concrete structure
(Master thesis, 2021)Floating offshore concrete structures are vulnerable to collisions with ships, and the likelihood of accidents increase with increasing numbers of structures. Current design codes are not accurate for impact short duration ... -
Performance analysis of thrusters and using the concept of Design for Assembly for construction of an ROV-frame
(Bachelor thesis, 2021)This thesis aimed to develop an ROV-frame based on the concept of Design for Assembly, while conducting a performance analysis of the thrusters to be used for its required motion. The development of the ROV-frame and the ... -
Performance analysis of thrusters and using the concept of Design for Assembly for construction of an ROV-frame
(Bachelor thesis, 2021)This thesis aimed to develop an ROV-frame based on the concept of Design for Assembly, while conducting a performance analysis of the thrusters to be used for its required motion. The development of the ROV-frame and the ... -
Performance improvement in multinational corporations
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The aim of this thesis work is to develop a performance improvement model template which supports multinational corporations in their daily operations. This has been achieved through literature review and four case studies. ... -
Permanent Plug & Abandonment Decision Support Technique: Modelling and Simulation based Analysis for Enhanced Value
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06)Several oil and gas producing assets on the NCS (Norwegian Continental Shelf) are entering a phase where the costs of extracting the hydrocarbons from the reservoir exceeds the income generated from production, and thus ... -
Permanent Plugging and Abandonment - An identification and discussion of technologies and the differences in UKCS and NCS regulations
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)There is a large number of wells on the Norwegian Continental Shelf that need to be permanently plugged and abandoned (P&A) within the next decades. As P&A does not provide any income, it is very important to develop ... -
Phenomenon of pipeline walking in high temperature pipeline
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The thesis describes the phenomenon of pipeline walking by specifically focusing on a short and high temperature pipeline and identifies key parameters of it in terms of the pipeline design. Moreover, a literature study ... -
Physical modeling of a Turbec T100 microturbine
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)The purpose for this thesis is to create a heat and mass balance model of the microturbine, Turbec T100, stationed at Risavika Gas Centre (RGC) in Tananger, Norway. The Turbec T100 at Risavika has some modifications due ... -
Pilot scale testing of salsnes filter (SF500) for biofilm solids removal from a full scale wastewater treatment plant
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-07-15)This thesis investigated the performance of Salsnes Filter (SF) as a secondary treatment after biological treatment processes at Nordre Follo Renseanlegg (NFR) wastewater treatment plant. Wastewater from moving ...