• Dynamic behaviour of jackets exposed to wave-in-deck forces 

      Raaij, Katrine van (PhD thesis UiS;17, Doctoral thesis, 2005)
      During the last decade, wave-in-deck loading on fixed offshore structures has increasingly been acknowledged as an issue of concern to the offshore oil and gas industry. Being mainly an issue for existing structures, the ...
    • Industrial Service Strategy : Development, Implementation and Execution 

      Kumar, Rajesh (PhD thesis UiS;19, Doctoral thesis, 2005)
      Increasingly, as markets become more competitive and globalized, industrial service providers are dependent on effective and efficient service strategies to achieve a certain level of customer satisfaction and ...
    • Cr₂N utvikling ved isoterm varmebehandling og korrosjons egenskaper for UNS S322003 

      Voll, Frank (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      I denne oppgaven er materialet UNS S32003 (AL 2003 TM) isotermt varmebehandlet ved 800 °C, ved tidene 0.25, 0,5, 1, 2, 3,10, 100 timer. Det ble sett på korrosjonsegenskapene og forandring i mikrostrukturen med hovedvekt ...
    • Våttauing av bunnramme 

      Korneliussen, Kjell (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      I de siste årene har det kommet mer teknologi som baserer seg på å bruke undervannsløsninger som tidligere krevde plattformløsninger. Dette skaper et økt behov for fartøyer som kan frakte og sette bunnrammer ned på ...
    • Energiproduksjon ved bruk av små kogenereringsanlegg : fokus på instrumentering og miljø 

      Lindberg, Øystein (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      Første del av denne rapporten beskriver instrumentering som i dag benyttes på EC Power kongenereringsanlegg, og hvordan de ved hjelp av denne instrumenteringen regulerer systemet. Ved bruk av andre typer drivstoff enn de ...
    • Zirkonium, et alternativ til titan? 

      Jektnes, Håvard (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      Zirkonium er et materiale som er polymorft og anisotropt. Faren for at fasetransformasjoner oppstår under normal drift er minimal, og tiltak kan iverksettes for å redusere risikoen ytterligere. Både titan og zirkonium har ...
    • Pre Rig well construction 

      Skogvoll, Bjørn Egil (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      Island Offshore og NeoDrill holder for tiden på med en feasibility studie hvor det blir sett på muligheten for å gjennomføre konstruksjon av et topphull ved bruk av et mindre fartøy som i utgangspunktet ikke er kvalifisert ...
    • Boring uten stigerør på ultradypt vann 

      Jørs, Paul H. (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      Boring av letebrønner og produksjonsbrønner til havs byr på utfordringer i forhold til å bore på land. Tradisjonelt benyttes et stigerør fra brønnhodet opp til fartøyet som borer. Dette er fylt med boreslam som blant ...
    • Statiske og dynamiske analyser av en hengebro under påvirkning av vindkast 

      Bjørnsen, Ingvild Pauline (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2007)
      En av de største utfordringene ved dimensjonering av store brokonstruksjoner er vindlast. Det var først etter kollapsen av Tacoma Narrows Bridge i 1940 at man begynte å fokusere på aerodynamisk atferd. I dag er forståelsen ...
    • Stability and motion response analyses of transport with barge 

      Fjelde, Sindre (Masteroppgave/UIS-TN-IKM/2008, Master thesis, 2008)
      The water has been used for transportation for ages. The barge started early to become one of the most effective methods to perform such an operation. Over the years the floating flat-bottomed structure has been developed ...
    • Operability comparison of three ultra-deepwater and harsh environment drilling vessels 

      Anundsen, Thorgeir (Masteroppgave/UIS-TN-IKM/2008, Master thesis, 2008)
      This report deals with how the design principles of different drilling vessels affect the motion characteristics and operability. Furthermore, the vertical heave limitation’s influence on the operability has been analyzed. ...
    • Factors influencing on-schedule delivery of IMR subsea services 

      Uyiomendo, Efosa Emmanuel (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2008)
      This Masters Thesis covers the Subsea Services industry in Norway. Its objective is to identify and evaluate the factors that influence compliance with agreed services delivery schedules. The focus is in on services ...
    • Floating wind turbines : the transport phase 

      Solli, Knut Jostein (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2008)
      The worldwide demand of renewable energy is increasing rapidly because of the climate problem. Wind energy appears as a clean and good solution to cope with a great part of this energy demand. Therefore, floating wind ...
    • Offshorekonstruksjoner utsatt for fallende last 

      Bjørnsen, Kristoffer Hope (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2008)
      Denne rapporten kontrollerer effekten ved bruk av ekstruderte aluminiumsprofiler som beskyttelse av offshorekonstruksjoner utsatt for fallende last. Sammensatt utgjør disse fleksible energiabsorberende kassetter som kan ...
    • Design of ROV launch and recovery system 

      Nordmark, Leiv-Ove (Masteroppgave/UIS-TN-IKM/2008, Master thesis, 2008)
      The remotely operated vehicle represents a key element in cost effective development, maintenance and decommissioning of various subsea installations. The ROV is in particular useful when performing deepwater operations. ...
    • NOx-utslipp fra skip 

      Lajord, Endre (Masteroppgave/UIS-TN-IKM/2007, Master thesis, 2008)
    • Passive heave compensation of heavy modules 

      Jakobsen, Sten Magne Eng (Masteroppgave/UIS-TN-IKM/2008, Master thesis, 2008)
      New subsea technology has increased size and weight of installed modules significantly. This thesis looks at heavy module installation from barge, through moonpool with use of passive heave compensation. An installation ...
    • Condition monitoring and condition based maintenance of static equipment at the Kårstø processing plant 

      Økland, John Kristian (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)
      This master thesis is looking into the feasibility of implementing Condition Monitoring (CM), Condition Based Maintenance (CBM) and principles from Integrated Operations (IO) on static equipment at the Kårstø Processing ...
    • Design of high-rise onshore steel and reinforced concrete structures for earthquake resistance 

      Tonning, Kristofer (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)
      The field of earthquake engineering and seismology is of great importance to structural engineers around the world. Only by studying past seismic activity can we predict, with a level of uncertainty, the occurrence of ...
    • Nonlinear analysis of a space frame subjected to loading from dropped objects 

      Singelstad, Anne Kathrine Vaagsnes (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2009)
      There is always a risk of an object being dropped during offshore lifting operations. Any underlying structure or equipment might be severely damaged, and in worst case, lives might be lost. Consequently, structures which ...