Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 657-676 av 1731
-
Experimental study on parametric configurations of artificially downwelling aerations in stratified water
(Peer reviewed; Journal article, 2023)Downwelling aeration has become a widely applied approach to cope with the water eutrophication in stratified reservoirs, rivers and lakes. The aeration parameters involving flow rate, flow locations and working periodicity ... -
Experimental Test and Numerical Analysis of Pipeline Rotation due to Residual Curvature during Installation
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)In the oil and gas industry, subsea pipeline plays a very important role in the transportation of the crude oil between subsea production system (SPS) components and from seabed to the offshore platform/facility, or from ... -
Experimental testing of the new wind tunnel at the University of Stavanger
(Bachelor thesis, 2023)This thesis aims to gain experience in using the newly installed CTO S.A open circuit wind tunnel at the University of Stavanger. Extensive research has been done on the topics of wind tunnel use, general aerodynamics, ... -
Experimental testing of the new wind tunnel at the University of Stavanger
(Bachelor thesis, 2023)This thesis aims to gain experience in using the newly installed CTO S.A open circuit wind tunnel at the University of Stavanger. Extensive research has been done on the topics of wind tunnel use, general aerodynamics, ... -
Exploration of Mechanical Properties of Enset–Sisal Hybrid Polymer Composite
(Peer reviewed; Journal article, 2022-02)Enset and sisal fibers are among the most widely used reinforcement to fabricate natural fiber-based composite materials. Hand lay-up techniques were employed in this study to fabricate enset–sisal (E/S) hybrid fiber ... -
Exploration on optimizing maintenance management by using condition monitoring on drilling platforms in COSL
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Taking a general investigation of maintenance activities in various industries, three maintenance philosophies are commonly applied, which are corrective maintenance, time-based periodic maintenance and condition-based ... -
Exploratory Data Analysis of the N-CMAPSS Dataset for Prognostics
(Peer reviewed; Journal article, 2021)In the recent years, industries such as aeronautical, railway, and petroleum has transitioned from corrective/preventive maintenance to condition based maintenance (CBM). One of the enablers of CBM is Prognostics which ... -
Exploratory Study: Implementation and Applications of Extended Reality
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-12)It is well known that the construction industry has the potential to increase its productivity. It is also well known that a solution can be to assess decisions made early in a project more thorough, as these decisions ... -
Exploring Cloud Adoption Possibilities for the Manufacturing Sector: A Role of Third-Party Service Providers
(Master thesis, 2023)As the manufacturing sector strides towards digitalization under the influence of Industry 4.0, cloud services have emerged as the new norm, driving change and innovation in this rapidly transforming landscape. This study ... -
Exploring of the incompatibility of marine residual fuel: A case study using machine learning methods
(Peer reviewed; Journal article, 2021-12)Providing quality fuel to ships with reduced SOx content is a priority task. Marine residual fuels are one of the main sources of atmospheric pollution during the operation of ships and sea tankers. Hence, the International ... -
Exploring the competitive state of practices in a project environment: issues, challenges and recommendations based on an industrial case
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-06)Actors in the Norwegian oil and gas sector are under siege. Competitive positions are being challenged and many companies experience fundamental issues in terms of profitability, efficiency and order inflow. In parallel, ... -
Exploring the feasibility of installing Smart-Kite's airborne wind energy system on commercial ships
(Master thesis, 2021)On the issue of climate change, which is one of the biggest problems of the century we live in, measures are being taken at the level of states. The importance of decarbonization in the road map drawn on this subject is ... -
Extended Reality for the Energy Sector: A Case of a Norwegian Company
(Master thesis, 2022)Extended Reality (XR) is a promising disruptive technology that has significant implications for the digital transformation in industrial sectors. The term “Extended Reality” is an umbrella term for existing immersive ... -
Extended use of Jack-Up in Marine Operations
(Master thesis, 2023)This paper discusses an approach for the identification of the characteristic responses of jack-up structures during the different phases of using jack-ups (i.e., transport, installation, operations, and retrieval). The ... -
Extension and modification of anticipatory failure determination approach based on I-TRIZ
(Master thesis, 2014-06-16)Anticipatory failure determination, abbreviated as AFD, is qualitative risk analysis approach that is based on I-TRIZ, a Russian short form of theory of inventive problem solving. Although this approach comprises two ... -
Fabrikasjonsvennlig design
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Masteroppgavens innhold er en studie av ideer og tanker som Aker Solutions Egersund ønsker utdypet. Som fabrikasjonsverft vet de hva som er mest økonomisk for dem, men for tiden sitter de ikke på et dokument som tar for ... -
Facilitating Data Sovereignty and Digital Transformation in Municipalities and Companies: An Examination of the Data for All Initiative
(Journal article, 2023)Access to comprehensive and up-to-date knowledge in the field of data is crucial for municipalities and regional authorities to make informed decisions and effectively address challenges. The Data for All project 2022-2025 ... -
Factors influencing on-schedule delivery of IMR subsea services
(Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2008)This Masters Thesis covers the Subsea Services industry in Norway. Its objective is to identify and evaluate the factors that influence compliance with agreed services delivery schedules. The focus is in on services ... -
Failure Prediction of Carbon-Fibre Epoxy Composite Subsea Flowline Using Response Surface Methodology
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020)Carbon Fibre Epoxy Composite is a relatively new material utilized in the subsea oil and gas industry. The fibre reinforced composite is competitive for its high strength-to-weight ratio and good corrosion resistance. This ... -
Fasthet-/ temperaturutvikling i betong
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-30)Arbeidsomfanget er å: • Undersøke effekten av pozzolaner på temperatur- og fasthetsutvikling • Gjennomgå årsak til spenningsdannelse i tverrsnittet og nær støpeskjøt • Utvikle et program for simulering av betongegenskaper ...