Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 1010-1029 av 1691
-
Mineralogical alterations in calcite powder flooded with MgCl2 to study Enhanced Oil Recovery (EOR) mechanisms at pore scale
(Peer reviewed; Journal article, 2019)Seawater injection into chalk-reservoirs on the Norwegian Continental Shelf has increased the oil recovery and reduced seabed subsidence, but not eliminated it. Therefore, understanding rock–fluid interactions is paramount ... -
Minimization of Surface Roughness and Temperature during Turning of Aluminum 6061 Using Response Surface Methodology and Desirability Function Analysis
(Peer reviewed; Journal article, 2022)Aluminum alloy is the second most abundant metal on Earth, known for its wide range of utilization in commercial goods due to its heat capacity and tensile strength. This study examines the effect of nose radius on the ... -
Mixed Reality Applications for Safety Trainings in Wind Energy Sector: A Case Study
(Master thesis, 2021)The international renewable energy agency (IRENA) forecast that the wind industry will grow at an exponential rate in the coming decades. This enormous growth has created the need and demand for qualified workforce which ... -
Mixed-mode I and II fatigue crack growth retardation due to overload: An experimental study
(Peer reviewed; Journal article, 2019-12)Environmental loads acting on structures usually cause fatigue crack propagation under variable amplitude mixed-mode conditions. In order to better estimate the remaining fatigue life, the fatigue crack growth behaviour ... -
Mobile offshore wind turbine
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)This master thesis develops a concept of a mobile offshore wind turbine. A fully instegrated vertically floating unit with telescopic tower and buit in lifting mechanism. Towing to site, installation and elevation methods ... -
Modal analysis of offshore monopile wind turbine: An analytical solution
(Peer reviewed; Journal article, 2022)An analytical solution of the dynamic response of offshore wind turbines under wave load with nonlinear Stokes’s wave theory and wave–structure and soil–foundation interactions is developed. Natural frequencies and the ... -
Modal Analysis of Painting Robot
(Master thesis, 2023)The new trend in luxury car painting detailing includes the utilization of cutting-edge technology such as the ABB painting robot IRB 5500, which offers precise and efficient painting capabilities. This advanced robotic ... -
Model for economical analysis of oil and gas deepwater production concepts : Comparisons of life cycle cost of subsea production systems vs. floating structures with dry wellheads.
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)The scope of the work was to create a model that will allow the comparison of Life Cycle Costs (LCC) for subsea production systems and floating structures with dry wellheads for the Mexican territorial waters of the Gulf ... -
Model of optimizing test frequencies and ensuring compliance of safety integrity level requirement of emergency shutdown systems based on condition monitoring: A case study in GASSCO
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-15)Gassco is the operator of the world’s largest transportation network of natural gas located on the Norwegian Continental Shelf. Their daily operation includes a number of assets such as offshore installations, processing ... -
Modeling a predictive maintenance management architectureto meet industry 4.0 requirements: A case study
(Peer reviewed; Journal article, 2020)Industry 4.0 is the latest paradigm of industrial production enabling a new level of organizing and controlling the entire value chain within a product life cycle by creating a dynamic and real-time understanding of ... -
Modeling and analyzing a suspension bridge in light of deterioration of the main cable wires
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Lysefjord Suspension Bridge, with a main span of 446 meters, has had problems with wire fractures in the main cables. This is reducing the durability of the bridge. Since the opening of the bridge in December 1997, over ... -
Modeling of breaking wave loads on jacket structure in FEM software USFOS
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)This thesis will in the first part present introduce and state the current development of offshore wind energy, and some of the motivations behind it. It will then present the current configurations and justify the need ... -
Modeling of Heavy-Oil Flow with Regard to Their Rheological Properties
(Peer reviewed; Journal article, 2021)With the depletion of traditional energy resources, the share of heavy-oil production has been increasing recently. According to some estimates, their reserves account for 80% of the world’s oil resources. Costs for ... -
Modeling Thermomechanical Stress with H13 Tool Steel Material Response for Rolling Die under Hot Milling
(Peer reviewed; Journal article, 2019)For the extreme pressure and temperature arising in the hot rolling process, thermomechanical (TM) models are used to predict the residual stresses on the surface of the die because a quantification of the TM stresses ... -
Modeling, analysis and testing of the steering system in a Formula Student car FS_UIS2013
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The University of Stavanger (UiS ) is competing in a Formula Student competition at Silverstone in spring 2013 with a Formula Student racing car. This Master Thesis aims to design, analyze and test the steering system of ... -
Modellering av Vestas V27-225 kW vindturbinblad
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)En av de største utfordringene ved dimensjonering av vindturbiner er vindlast. Forståelse av aerodynamisk atferd er en veldig viktig faktor når en vindturbin skal konstrueres, spesielt ved utformingen av turbinens ... -
Modellering og Elementanalyse av Sandwichkomposittmaterialer for utriggere
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Hovedformålet med oppgaven er å finne en metode for beregning av sandwichkompositter. Metoden som er utarbeidet skal brukes til å analysere en utrigger laget av Green Bay Systems. I tillegg skal enkelte stålkomponenter på ... -
Modellering og konstruksjonsanalyse av boligbygg med fokus på jordskjelvlaster
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)I forbindelse med prosjektering av nye bygg i Norge er laster på grunn av jordskjelv relativt nytt å ha med i dimensjoneringsprosessen. Den første norske standarden som tok for seg laster fra seismiske påvirkninger (NS ... -
Modellering og statisk analyse av limtrekonstruksjoner
(Bachelor thesis, 2021) -
Modelling analysis of maintenance logistics optimization for a floating wind park: A case study for Utsira Nord
(Master thesis, 2022)The global society is part of a climate challenge that requires the development of will, understanding and technology. The United Nations has given the climate challenge its sustainability goal, saying, "Goal 13: Take ...