Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 517-536 av 1695
-
Dynamic analysis of spur gear with backlash using ADAMS
(Peer reviewed; Journal article, 2020)Gear tooth profile can deviate from its initial design shape and size as a result of increasing service time under time-varying load, introducing external agents like debris, overheating due to friction, wear, and in ... -
Dynamic and Fatigue Analyses of Suspended Power Cables for Multiple Floating Offshore Wind Turbines
(Master thesis, 2023)Floating offshore wind turbines (FOWTs) are installed to effectively capture energy from offshore wind in deeper water areas where building bottom-fixed offshore wind turbines is not practical. The present study focuses ... -
Dynamic behaviour of jackets exposed to wave-in-deck forces
(PhD thesis UiS;17, Doctoral thesis, 2005)During the last decade, wave-in-deck loading on fixed offshore structures has increasingly been acknowledged as an issue of concern to the offshore oil and gas industry. Being mainly an issue for existing structures, the ... -
Dynamic design and analysis of subsea CO2 discharging flowline for cargo submarines used for CCS in low-carbon and renewable energy value chains
(Peer reviewed; Journal article, 2022)Developing offshore low carbon and renewable energy value chains to realize a net-zero energy future requires combining offshore renewable energy and carbon capture storage (CCS) solutions. The subsea shuttle tanker (SST) ... -
Dynamic loads on telescopic safety joint for workover riser
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-05)The push in the industry towards increasing the weather window for marine operations offshore leads to a focus on new technology. When performing workover operations in a subsea well, the workover riser is a physical ... -
Dynamic response analysis of a catamaran installation vessel during the positioning of a wind turbine assembly onto a spar foundation
(Journal article; Peer reviewed, 2018-05-11)Installation of floating wind turbines is a challenging task. The time and costs are closely related to the installation method chosen. This paper investigates the performance of an efficient installation concept – a ... -
Dynamic response of a floating bridge under wind conditions from field measurements
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-28)The long and slender floating structures across the wide and deep waters are exposed for considerable environmental loads. In this study, the dynamic response of a curved floating pontoon bridge supported by side mooring ... -
Dynamic response of a floating offshore wind turbine
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)The ever increasing demand for renewable energy, combined with limited areas suitable for large wind farms, has put focus on the development of floating wind turbines. In this thesis the dynamic response of a floating ... -
Dynamisk analyse av bruer med jordskjelvlast
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Dette arbeidet ble utført våren 2011, som avslutning på studien Mastergrad i Konstruksjon og Materialer, ved Universitet i Stavanger, Norge. Oppgaven var meget utfordrende, først og fremst på grunn av omfanget (se 0.2 ... -
E39 and Slipforming of environmental-friendly concrete
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)Slipforming is a construction method that has been used in many years for production of concrete structures and it is mainly suited for tall structures such as towers, bridge columns, silos, and offshore platforms with ... -
Eastern-Mediterranean Metocean Design Basis
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-12-23)Energy is one of the basic requirements of sustainable development of civilizations. Mankind is moving further to harsher environments, e.g. marine and arctic environments, to sustain energy production. Technology evolution ... -
EBSD and TEM study of DMD manufactured cp-TI (grade 2)
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-29)Two components, 3D printed by Norsk Titanium components, through a direct metal deposition plasma transferred arc. An additive layer manufacturing technique. One made of a single wire layer thin sample, and one made of two ... -
Eco-friendly and cost-effective slab for an office building
(Bachelor thesis, 2022)It is very popular to use prefabricated concrete elements instead of cast-in-situ slabs in many different construction buildings. The background of this thesis is to study how this apply to large construction buildings as ... -
Effect and consequence analysis of expanding PIN-technology in various types of heavy machinery
(PhD thesis UiS;, Doctoral thesis, 2023)Expanding pin systems can be applied in any joint, moveable, or fixed, in any type of machine, crane, or equipment, in almost any type of industry, globally. There are a variety of different versions of expanding pins ... -
Effect of 3D printing on the microstructure and mechanical properties of an Inconel 718 Nickel-alloy (UNS N07718)
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Flow measuring instruments are important for the oil and gas industry. These instruments are exposed to hostile environments during operation. These hostile environments demands high quality materials with excellent ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)Bruken av stålarmering i form av armeringsjern har vært brukt i mange år for å forbedre strekk- og bøyestyrken til betongelementer. Forskningen og utviklingen innen betongfeltet utvides stadig på grunn av at betong er det ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)The use of steel reinforcement in the form of rebar has been used for many years to improve the tensile and flexural strength of concrete elements. The research and development within the field of concrete is ever expanding ... -
The Effect of CO2 Curing on Cement-Based Materials
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)Early carbonation curing of concrete elements has been shown to be a promising sustainable technology for CO2 capture and utilization, which would be beneficial for the environment. It has been found that carbonation curing ... -
Effect of different source terms and inflow direction in atmospheric boundary modeling over the complex terrain site of Perdigão
(Peer reviewed; Journal article, 2023)Assessing wind conditions in complex terrain requires computational fluid dynamics (CFD) simulations incorporating an accurate parameterization of forest canopy effects and Coriolis effects. This study investigates how ... -
Effect of electron beam welding on the microstructure and mechanical properties of nickel alloys
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-13)The effect of electron beam welding on the precipitation strengthened Ni-base superalloys Inconel 718 and Custom Age 625 PLUS have been investigated. Solidification of the weld metal in these alloys terminates in a eutectic ...