Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel

Viser treff 696-715 av 1689

    • Field development optimization of waterflooding process using data assimilation methods 

      Guliev, R.; Zolotukhin, Anatoly (Peer reviewed; Journal article, 2019)
      The application of data assimilation methods for field development optimization has been the subject of intense investigation during the past 10 years. Lately has seen remarkable progress in the ability of data assimilation ...

    • Field-specific Technical and Economic Feasibility Analysis of Subsea Shuttle Tanker 

      Undstad, Fredrik Hovden (Master thesis, 2022)
      This master thesis presents a Field-specific Technical and Economic Feasibility Analysis of a Subsea Shuttle Tanker. Several carbon capture and storage projects are being developed in Norway and worldwide. A Subsea Shuttle ...

    • Finite element analyse av en skråstagsbro 

      Habeeb, Khaled (Bachelor thesis, 2023)
      This thesis provides a static analysis of a Cable-Stayed Bridge using the Finite Element Analysis in ANSYS Workbench software. The static loads that were taken into consideration are the traffic loads and the static wind ...

    • Finite element analysis and experimental testing of lifting capacity for GRP cover. 

      Ulversøy, Endre (Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)
      Structures made of glass reinforced plastic (GRP), often abbreviated GRP cover, are used to protect subsea equipment in the oil and gas industry. These structures need to be lifted during fabrication, transportation and ...

    • Finite Element Analysis and Fatigue Damage Assessment of a Railway Bridge Subjected to Variable Amplitude Loading 

      Hope, Maja Mydland (Bachelor thesis, 2023)
      Many of the railway bridges in Norway and the rest of the world are closing in on the end of their predicted service life, and the need for more precise fatigue life assessments and predictions is challenging for the railway ...

    • Finite element analysis of a friction clamp located on a North Sea jacket 

      Devold, Ivar Andreas (Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)
      This master thesis is written on the University of Stavanger spring 2011 in collaboration with Subsea 7. When transporting hydrocarbons from seabed to top side on a jacket platform there is always the need of a riser. ...

    • Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress 

      Al-Yacouby, Ahmad Mahamad; Arwie Amri, Mazli; Liew, M. S.; RATNAYAKE MUDIYANSELAGE, Chandima; Samarakoon, Mudiyansele Samindi Manjula K (Peer reviewed; Journal article, 2022)
      Steel plates with openings are among the important ship structural components used in the ship’s hull to withstand the hydrostatic forces of the ocean, which cause sagging and hogging moments at the ship’s bottom. The ...

    • Finite element method-based modeling of bending under tension friction test of deep drawing quality steel sheets 

      Trzepiecinski, Thomasz; Lemu, Hirpa G. (Peer reviewed; Journal article, 2019)
      Understanding of the effect of the friction on the sheet deformation is a key factor in design and realization of stamping process. Among others, bending under tension friction test simulates the frictional phenomena on ...

    • Finite Element Modelling and Analysis of Axial Settlement of Light Poles 

      Rasmussen, Simen (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020)
      The slip joint technology is a method for connecting two conical pole segments together, without the use of bolts or grout, thus reducing time of installation and the need of maintenance. In recent years there have been ...

    • Finite Element Models for Integrity Assessment of Flexible Riser with Damaged Tensile Wires 

      Haugen, Mathias O. M. (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
      Many of the flexible risers in service do not meet their documented service life. A common failure mode is the rupture of the abrasive external layer which, in itself, is not critical, but seawater ingress may corrode ...

    • FishTrapSafe: Fra ide til ferdig produkt 

      Bjerga, Mette (Bachelor thesis, 2022)
      During fishing activities, it is not uncommon that some of the equipment gets lost because of bad weather or bad luck during operations. However, an increasing problem faced by fishers is the loss of gear because of theft. ...

    • Flatdekke kaikonstruksjon med eller uten spennarmering 

      Botnen, Eirik (Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)
      Denne oppgåva omhandlar bruk av flatdekke som dekke-element i kaikonstruksjonar. Målet med oppgåva er å konstruere eit vekt-, tids-, og kostnadseffektivt alternativ til dagens kaidekkeelement. For å synleggjere eventuelle ...

    • Flatdekke med spennarmering 

      Breivik, Lene (Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)
      Denne rapporten omhandler et flatdekke med spennarmering. Det aktuelle dekket er en del av en konstruksjon som er under utbygging i Sandnes. Dette stedstøpte og etterspente dekket skal brukes som parkeringsareal. Rapporten ...

    • Flexible riser global analysis for very shallow water 

      Karegar, Sadjad (Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)
      Flexible risers are widely used for a range of water depths and can accommodate large floater motions when using a buoyant system. A wide range of buoyancy solutions have been developed for very shallow water (e.g. 30-50 ...

    • Flexural behavior of cracked reinforced concrete beams with externally bonded CFRP plates 

      Graneland, Elin (Master thesis, 2021)
      The purpose of this thesis is to perform an experimental study of the flexural behavior of damaged reinforced concrete beams strengthened with externally bonded Carbon Fiber Reinforced Polymer (CFRP) plates. Damage have ...

    • Flexural dynamic behavior of submerged cylindrical structures under wave loads 

      Giotis, Theofanis; Pavlou, Dimitrios; Belibassakis, Konstadinos A. (Peer reviewed; Journal article, 2019-11)
      Abstract. An analytical solution for the dynamic response of submerged slender circular cylindrical structure subjected to linear wave loads is presented. A double Laplace transform with respect to temporal and spatial ...

    • Flexural dynamic response of monopile foundations under linear wave loads 

      Giotis, Theofanis; Pavlou, Dimitrios (Peer reviewed; Journal article, 2020-03)
      An analytical solution for the dynamic response of submerged slender circular cylindrical structures subjected to linear wave loads is presented. A double Laplace transform with respect to temporal and spatial variables ...

    • Floating wind turbines : the transport phase 

      Solli, Knut Jostein (Masteroppgave/UIS-TN-IKM/2009, Master thesis, 2008)
      The worldwide demand of renewable energy is increasing rapidly because of the climate problem. Wind energy appears as a clean and good solution to cope with a great part of this energy demand. Therefore, floating wind ...

    • Floating wind turbines structural details fatigue life assessment 

      Gaidai, Oleg; Yakimov, Vladimir; Wang, Fang; Zhang, Fuxi; Balakrishna, Rajiv (Peer reviewed; Journal article, 2023)
      Fatigue damage prediction is essential for safety of contemporary offshore energy industrial projects, like offshore wind turbines, that are to be designed for sufficiently long operational period of time, with minimal ...

    • Flow around two elastically-mounted cylinders with different diameters in tandem and staggered configurations in the subcritical Reynolds number regime 

      Janocha, Marek Jan; Ong, Muk Chen; Nystrøm, Per Richard; Tu, Zhenguo; Endal, Geir; Stokholm, Halvor (Peer reviewed; Journal article, 2021)
      Flow around two cylinders with different diameters undergoing Flow-Induced Vibrations (FIV) in the subcritical flow regime is investigated using two-dimensional Unsteady Reynolds Averaged Navier-Stokes (URANS) approach. ...