Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 816-835 av 1689
-
In-place and lift analysis of an offshore module: Comparative study
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Design of offshore structures involves a variety of subjects including effects of harsh environmental conditions, variable loading patterns at each stage of the work and different accident scenarios e.g. explosions and ... -
In-place strength assessment of a jacket and effects of an impact with a floating living quarter (flotel)
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)The primary function of a jacket structure is to support the weight of the topside structure by transferring the weight to the foundation. The jacket structure must also be designed to resist environmental loads (from wind ... -
Industrial Service Strategy : Development, Implementation and Execution
(PhD thesis UiS;19, Doctoral thesis, 2005)Increasingly, as markets become more competitive and globalized, industrial service providers are dependent on effective and efficient service strategies to achieve a certain level of customer satisfaction and ... -
Industrial services perspective of the oil and gas industry : a case study of the Nigerian national petroleum corporation
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Within the NNPC, its subsidiaries are charged with the main responsibility of providing services for the Corporation, they are also given the mandate to outsource services from specialized companies, most of who have ... -
Infillmetoden og fagverksanalogi brukt som verktøy for analyse av horisontale elementdekker
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Oppgaven tar for seg utprøving og vurdering av en alternativ metode for å beregne krefter og armering i horisontale dekker av hulldekkeelementer. Metoden har som mål å være enklere og raskere i bruk enn eksisterende ... -
Influence of 3D Printing FDM Process Parameters on Tensile Property of ULTEM 9085
(Peer reviewed; Journal article, 2019)3D printing is a promising digital manufacturing technique that produces parts, layer by layer. Fused deposition modeling (FDM) is a widely employed 3D printing technology that produces components by heating, extruding and ... -
Influence of linear springing on the fatigue damage of ultra large ore carriers
(Journal article; Peer reviewed, 2018-05)Springing occurs more frequently to ultra large ships, as their natural frequencies are relatively low and approaches the spectral peak of the wave energy spectrum in certain sea states. Springing is a resonance phenomenon ... -
Influence of material factors on the determination of dynamic moduli and associated prediction models for different types of asphalt mixtures
(Peer reviewed; Journal article, 2022)In a Mechanistic-Empirical (ME) pavement design system, the dynamic modulus is used to characterise asphalt mixtures, which are affected by many factors including environmental conditions and material properties. This study ... -
Influence of Span to depth ratio in designing concrete bridges
(Master thesis, 2023)The influence of the span-to-depth ratio in designing concrete bridges is a critical aspect of bridge engineering. This study focuses on investigating the span-to-depth ratios of reinforced concrete bridges and post-tensioned ... -
The influence of the composition of water on the results of accelerated aging resistance testing of low voltage subsea cables insulation
(Peer reviewed; Journal article, 2019)The composition of water changes with temperature, for instance, the saturation rate of water in polyurethane membranes is related to the temperature. Thus, it is necessary to evaluate the influence of the composition of ... -
The Influence of Unstable Wind Models on the Motions and Loads of a Semi-Submersible Floating Wind Turbine
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-14)As the wind turbine industry continues to play a part in the production of energy, the need for larger and more powerful wind turbines keeps increasing. The movement towards offshore wind turbine structures provides ... -
The influences of international standards on structural performance and fracture behavior of 3D printed long fiber composite structures
(Peer reviewed; Journal article, 2023)The material properties of the additive manufactured composite structures are usually done following international standards, that show some difference dimensionally. This study focuses on the impact-induced on the tensile ... -
Innovation in Condition Monitoring and Predictive maintenance solutions in industrial contexts
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-12)Innovation has become during the last decades the ultimate focal point to the majority of academics, managers and industrial market players due to the enlarged competition and the accentuated need to improve business ... -
Innovative developments and managerial factors as key enablers of deepwater riser project delivery
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-15)The oil and gas industry is currently facing unprecedented challenges because of a negative impact from a declined commodity pricing trend. As the industry tackles deeper and more complex projects, the use of innovative ... -
Inspection and monitoring techniques for un-bonded flexible risers and pipelines
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-16)Un-bonded flexible pipelines and risers are an alternative to conventional rigid steel pipes. The use of flexible pipes has enabled development of several offshore fields that seemed unfeasible with the use of rigid pipes ... -
Inspection planning for fatigue cracks in offshore structures by Monte Carlo simulations
(Peer reviewed; Journal article, 2019)Probability-informed inspection planning has traditionally a tendency to produce longer inspection intervals for older structures in contrast with the intuitive assumption that shorter inspection intervals are needed. In ... -
Installation analyses of a subsea structure
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-12)A typical installation of a subsea structure with mono hull offshore construction vessel is studied. Focus has been on the vessel motions, lifting arrangement and the planning of this operation. The behaviour of vessel ... -
Installation of steel pipelines and flexible pipelines in sideway current
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)This master thesis is describing the theoretical & analytical principles of pipeline installation. In the literature survey stage we elaborate on basic information about different types of offshore pipelines. Installation ... -
Installation of subsea equipment in ultra-deep water using fibre rope deployment system
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-15)As the demands for installation at deeper waters is increased, technology for such installations must be adapted to the conditions of the deep and ultra-deep water depths. This thesis provides information of such installations ... -
Integrated Evaluation of Masela Block Development Concepts
(Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06-12)The vast amount of proven reserves of Masela gas block in Indonesia that reach 10.73 TCF is captivating in terms of development. The hydrocarbon is going to be produced through 18 production wells that are connected to 5 ...