Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 931-950 av 1695
-
Literature Review on Repair methods for Damaged Offshore Joints
(Master thesis, 2021)Offshore structures subject to severe environmental loading may exhibit fatigue damage over time. In particular, fatigue cracks are a significant concern in welded components. Previous work has been published regarding the ... -
Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing
(Peer reviewed; Journal article, 2023-03)The wire arc additive manufacturing (WAAM) process is a 3D metal-printing technique that builds components by depositing beads of molten metal wire pool in a layer-by-layer style. Even though manufactured parts commonly ... -
Literature review on thin-walled and cellular structure designs for energy absorption
(Peer reviewed; Journal article, 2023)Bio-inspired structure is a topic of immense interest to researchers worldwide. In order to maximize energy absorption through biomimetic structures, this article presents bio-inspired structure particularly, thin walled ... -
Livssyklusanalyse av bygninger ved bruk av BIM: En case-studie
(Master thesis, 2021)A large proportion of the total emission from the building and construction industry are related to the production of building materials. In buildings with low energy needs, building materials make up a large percentage ... -
Load analysis on an offshore wind turbine structure
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)This report is written as documentation of a master thesis in the course constructions and materials at the University of Stavanger. The thesis was performed within January to June 2012 as a further research on an international ... -
Load capacity and structural response of CLT-concrete composite slabs with two different types of shear fasteners
(Master thesis, 2021)Abstract The subject of this Master thesis is to investigate the performance of the behaviour of Cross Laminated Timber-concrete composite slabs with two different types of shear fasteners by performing theoretical predictions ... -
Load Capacity of a Steel Bridge: Effect of Corrosion for Lateral-Torsional Buckling Capacity
(Bachelor thesis, 2024) -
Load sequence effects and mixed-mode fatigue crack growth in offshore structures
(PhD thesis UiS;, Doctoral thesis, 2019-12)An increasing number of the offshore structures in the North Sea are being operated in a life extension phase, which means that their original design life has been exceeded. As the structures age, they are deteriorating, ... -
Local joint flexibility of tubular offshore joints with eccentric brace to chord connections
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-30)Local joint flexibility of tubular offshore joints has been researched to be able to account for correct deflection and redistribution of member forces and moments. This has shown to improve design life prediction for ... -
Long term analyses of wave characteristics
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The focus in this master’s thesis was to describe and compare the two long-term analysis methods: All Sea States and Peak-Over-Threshold. Both methods are equitable and commonly approved methods to estimate extreme waves. ... -
Long Term Response Analyses of a Jacket Structure with Focus on a Peak Over Threshold Approach
(Master thesis, 2022)This thesis investigates the use of long term analysis to estimate the q-probability responses of a non-linear problem. The structure subjected to the investigations is a realistic jacket found in the Norwegian Continental ... -
Long-term response of a curved floating bridge to inhomogeneous wind fields
(Peer reviewed; Journal article, 2023-07)A numerical model of a 5 km long curved floating bridge, planned for the Bjørnafjord, in Norway, is subjected to strong wind events with stationary mean properties that vary along the bridge axis. A Weather Research and ... -
Loss of Integrity on Mooring Lines – Causes and Consequences
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-16)In the history of offshore industry, position keeping has been an essential part for allowing operations to be performed, and production to be maintained. This is often done by connecting mooring lines between the vessel ... -
Low cost deep water wells
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)A major cost-factor of drilling deep water wells today is associated with the high day rates of the larger rigs capable of drilling in such depths. Most subsea completions today are based on the 18-3/4” wellheads system. ... -
Low temperature thermomechanical treatment of corrosion resistant alloys
(Masteroppgave/UIS-TN-IKM/2013;, Master thesis, 2013)Wear deteriorates materials and are a widespread problem in many areas of industry. To some extent, all physical materials experience wear in one form or another by moving gas, particles, fluids or a combination of these ... -
Luftinnføring i betong med Portland-flygeaske sementer – innvirkning av sementegenskaper
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2016-01-15)For å lage en frostbestandig betong tilsettes luftinnførende stoff. Dette danner et finfordelt luftporesystem som kan ta hånd om volumøkningen til vannet når det fryser. Å oppnå kravene til luftinnhold kan være krevende. ... -
Luftinnføring i betong med Portland-flygeaske sementer: Karboninnhold i- og behandling av flygeaske
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Ved produksjon av betong for utvendige værutsatte konstruksjoner er frostbestandighet viktig. Å oppnå kravene til frostbestandig luftinnhold er ikke alltid så enkelt bl.a. fordi luftinnføring kan være følsomt overfor selv ... -
Machine Learning Approach for Risk-Based Inspection Screening Assessment
(Peer reviewed; Journal article, 2019-05)Risk-based inspection (RBI) screening assessment is used to identify equipment that makes a significant contribution to the system's total risk of failure (RoF), so that the RBI detailed assessment can focus on analyzing ... -
Machine Learning Based Approach to Predict Fuel Consumption on Mobile Offshore Drilling Units
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-15)The use of machine learning models for optimization and improved decision-making has a great potential in the drilling industry. This thesis demonstrates a model for predicting fuel consumption on the Mobile Offshore ... -
Machine learning methods for assessing value-of-information
(Master thesis, 2022)One of the most useful features of decision analysis is its ability to distinguish between constructive and wasteful information gathering. Value-of-information (VOI) and sequential information gathering (Value-of-Flexibility, ...