Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 1475-1494 av 1687
-
Subsea FRP pipeline performance in external pressure: Failure and external pressure-induced buckling
(Peer reviewed; Journal article, 2021)The Subsea pipelines are subjected to high hoop stresses due to the hydrostatic pressure. When the internal pressure of the liquid has a higher value than the external hydrostatic one, there is a balance of the tensile and ... -
Subsea gas transition hubs
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-15)Gassco is the operator of two platforms with gas transport functions. These platforms are getting old and require large modifications to extend the lifetime and maintain their functions. Rapid development in subsea technology ... -
Subsea in the Kara Sea
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)In this master’s thesis the application of subsea technology in the Kara Sea were described. Using date for one perspective structure, several scenarios of field’s development were observed; the most important recovery ... -
Subsea inspection and monitoring challenges
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)This paper uncovers and suggests solutions for the challenges to control change over time more reliable and cost effective. Front-end concept engineering, design, inspection and monitoring strategies, technologies, systems ... -
Subsea Pipeline Design Features on the Russian Shelf Conditions
(Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)Today in Russia, more than 75% of the explored onshore oil and gas fields are involved in the development, and their reserves have been produced at least by half. New discovered deposits are less and less, and their resources ... -
Subsea standalone vehicle system for Snorre
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)The rig manager on Snorre B, a semisubmersible production and drilling rig for Statoil, has expressed the need for a subsea standalone vehicle that can perform specific tasks when the conventional remote operated vehicles ... -
Subsea Template Lifting Operations in the Sea of Okhotsk
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-14)Sea of Okhotsk is characterized by harsh environmental conditions. The navigation period lasts approximately 5 months (June – October). Sea ice starts to form in November with 0.8-1.1 m thickness. Vessel icing is possible ... -
Subsea Tie-in, design solutions and optimisation methods
(Master thesis, 2015-06-15)Subsea Tie-in Systems is used to connect pipes between subsea structures in the offshore oil and gas industry. Subsea Tie-in system has been developed for many decades by the industry, and is used throughout the world in ... -
Suction effect of skirted mud mat of GRP covers under wave loads
(Master thesis, 2023)To mitigate potential risks of soil and structural failures in offshore foundation systems, it is crucial to examine seabed soil behavior near the structure especially near the skirtfaces under dynamic wave loads. This ... -
Suggested design for transport and installation of offshore wind turbines
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The state of the art today of transporting and installing offshore wind turbines is a costly endeavor, therefore, it is needed with new designs to reduce the time and cost of such operations. A new design has been presented ... -
Suggested improvements for ship-installation collision risk models to reflect current collision avoidance systems
(Masteroppgave/UIS-TN-IKM/2010;, Master thesis, 2010)Accurate quantification of risks for vessel-to-platform collisions has been a goal of the petroleum industry for many years; however, technological advances in collision avoidance systems have not been reflected in current ... -
Suitability Analysis of Implementing a Fuel Cell on a Multirotor Drone
(Peer reviewed; Journal article, 2020-05)Increased flight time of multirotor drones is a key enabler for further adoption and industrial use of drones. A model for analyzing the performance of a fuel cell hybrid system for a multirotor drone is presented and ... -
A summary of adapting Industry 4.0 vision into engineering education in Azerbaijan
(Peer reviewed; Journal article, 2019-11)Industry 4.0 vision and associated technologies are rapidly adopted in several industrial sectors to gain the benefits of creating smart cyber-physical systems and operations. Some sectors, e.g. manufacturing, oil and gas, ... -
A Survey Dataset Evaluating Perceptions of Civil Engineering Students about Building Information Modelling (BIM)
(Peer reviewed; Journal article, 2023)The implementation of Building Information Modelling (BIM) technologies has become increasingly central in the design, construction and maintenance of both civil structures and infrastructures. As more and more software ... -
Survival in cold waters - learnings from participation in cold water exercises - a regulatory perspective related to the Norwegian offshore industry
(Peer reviewed; Journal article, 2019)Participation in exercises lead by the University of Stavanger, the SARex 1 in 2016 and SARex 2 in 2017, provided valuable lessons related to survival in a cold maritime environment. The scenario of the exercises was a ... -
Sustainability-based development of local food service in a hypermarket context: A case study in Finland
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)Food retailing is one of the most diverse and dynamic sectors in developed societies, offering a seemingly increasing range of food and services to consumers. Food retailers have recently started taking sustainable initiatives ... -
Sustainable design of reinforced concrete slab bridges using CO2 emission optimization.
(Master thesis, 2022)Det har i det siste blitt mer fokus på miljø og bærekraft ved prosjektering av bygge- og anleggsprosjekter. I den siste utgaven av håndbok N400 for bruprosjektering, som ble utgitt januar 2022, er det stilt et nytt krav ... -
Sustainable industry and supply chain - what to teach
(Peer reviewed; Journal article, 2022)How to teach students about development and sustainable operation of companies and supply chain are a complex task with several partly conflicting issues. Entrepreneurship business models are more different than sustainable ... -
Synthesis and characterization of fly ash and slag based geopolymer concrete
(Peer reviewed; Journal article, 2019)This paper presents the formulation and characterization of composite fly ash and slag based geopolymer concrete. Potassium hydroxide (KOH) and potassium silicate (K2SiO3) liquid alkaline activators were used in the ... -
System of Comprehensive Energy-Efficient Utilization of Associated Petroleum Gas with Reduced Carbon Footprint in the Field Conditions
(Peer reviewed; Journal article, 2020)This paper considers the issue of associated petroleum gas utilization during hydrocarbon production in remote petroleum fields. Due to the depletion of conventional oil and gas deposits around the globe, production shifts ...