Blar i Vitenskapelige publikasjoner (TN-IMBM) på tittel
Viser treff 353-372 av 455
-
Response sensitivity of a semisubmersible floating offshore wind turbine to different wind spectral models
(Peer reviewed; Journal article, 2020)Previous research on the OC3 spar floating offshore wind turbine (FOWT) has shown the sensitivity of the yaw and side-side modes' load and motion responses to different atmospheric conditions. Using the same baseline turbine ... -
Reuse of decommissioned offshore steel components for new buildings: A case study
(Peer reviewed; Journal article, 2023)Reuse process of structural steel members, which are extracted from decommissioned offshore platform, for new apartment building is presented in this paper. An index is introduced to assess the technical feasibility of the ... -
Review and synthesis of a walking machine (Robot) leg mechanism
(Peer reviewed; Journal article, 2019-08)A walking machine (robot) is a type of locomotion that operates by means of legs and/or wheels on rough terrain or flat surface. The performance of legged machines is greater than wheeled or tracked walking machines on an ... -
A review of fatigue damage detection and measurement techniques
(Peer reviewed; Journal article, 2021-09)A vast amount of research has been carried out towards the goal of quantifying changes related to the fatigue damaging process in materials throughout the fatigue life. However, no recommended practice has been developed ... -
Review on fatigue life assessment methods for welded joints in orthotropic steel decks of long-span bridges
(Peer reviewed; Journal article, 2021)Orthotropic Steel Decks have been used in long-span bridges for several decades because of their high capacity to weight ratio. However, many fatigue related issues have been reported. This paper provides an overview of ... -
Road Transportation Challenges in the Arctic
(Peer reviewed; Journal article, 2020)Despite all efforts to mitigate global warming, its rate and magnitude are still rising where transportation is considered to be an important contributor. In the Arctic regions however, unstable weather conditions, strong ... -
S-N curve for riveted details in corrosive environment and its application to a bridge
(Peer reviewed; Journal article, 2020-01)A formula for stress‐life curve is proposed to predict the fatigue life of riveted bridges located in corrosive environments. The corrosive environment‐dependent parameters of the S‐N curve are determined based on the ... -
Safety design study for energy harvesters
(Peer reviewed; Journal article, 2023-10)Modern offshore and onshore green energy engineering includes energy harvesting—as a result, extensive experimental investigations, as well as safety and reliability analysis are crucial for design and engineering. For ... -
Safety related study of Expanding Pin systems application in lifting and drilling equipment within Construction, Offshore, and Marine sectors
(Peer reviewed; Journal article, 2021)A questionnaire-based survey has been performed among original equipment manufacturers (OEMs), sub-suppliers, engineering companies, end-users, service & maintenance, and “others”, as part of an investigation to clarify ... -
Scalability and compatibility analyses of airborne wind technology for maritime transport
(Peer reviewed; Journal article, 2019)Wind energy is a source freely available in the oceans. New developments in the wind industry are towards high altitude wind turbines, known as Airborne Wind Energy Systems. The airborne wind technology is rapidly developing ... -
Scour and Burial of Spherical Bodies, Short Cylinders, and Truncated Cones Induced by Bichromatic and Bidirectional Waves
(Peer reviewed; Journal article, 2024)This article provides a method by which the scour and self-burial of spherical bodies, short cylinders, and truncated cones that are induced by bichromatic and bidirectional waves could be derived. The empirical scour and ... -
Sensitivity Study of Design Parameters for a Fuel Cell Powered Multirotor Drone
(Peer reviewed; Journal article, 2021)The use of multirotor drones for industrial applications is accelerating, and fuel cell based propulsion systems are highlighted as a promising approach to improve endurance – one of the current main limitations. Due to ... -
Sensitivity to hydrogen induced cracking, and corrosion performance of an API X65 pipeline steel in H2S containing environment: influence of heat treatment and its subsequent microstructural changes
(Peer reviewed; Journal article, 2021-07)In this investigation, the effect of microstructural changes and phase equilibria on corrosion behavior and hydrogen induced cracking (HIC) sensitivity of an API X65 pipeline steel was studied. For this purpose, heat ... -
Service and inventory model for maintenance workshop in the short cycle operation region: Agent-based simulation approach
(Peer reviewed; Journal article, 2023)Tools used in the North Sea region has a high cycle and come very often to maintenance workshop to be checked, repaired if needed and prepared for the next operations. The availability of spare parts at the workshop plays ... -
Servitization: A Model for the Transformation of Products into Services through a Utility-Driven Approach
(Journal article; Peer reviewed, 2018-12)The economies of the industrialized world have become dominated by services. Many manufacturing companies have changed from producing products to providing services. However, many companies still lag behind in this ... -
Short-Crested Wave–Current Forces on a Concentric System with an ARC Exterior Porous Wall
(Peer reviewed; Journal article, 2023-03)In this study, the potential flow theory is adopted to develop an analytical solution to the diffraction problem of a short-crested wave–current incident on a concentric system consisted of an arc exterior wall and interior ... -
Simulated wind-generated inertial oscillations compared to current measurements in the northern North Sea
(Journal article, 2018-06)Measured current speed data show that episodes of wind-generated inertial oscillations dominate the current conditions in parts of the northern North Sea. In order to acquire current data of sufficient duration for robust ... -
Simulation of peak tension loads in Subsea power cables during installation
(Peer reviewed; Journal article, 2021-11)At present, most of the insurance claims in the offshore wind industry are due to cable failures where a large percentage occurs during the installation of the array and export cables. As the reliability of the cables ... -
Spar-type vertical-axis wind turbines in moderate water depth: A feasibility study
(Peer reviewed; Journal article, 2018)The applications of floating vertical-axis wind turbines (VAWTs) in deep water have been proposed and studied by several researchers recently. However, the feasibility of deploying a floating VAWT at a moderate water depth ... -
Spare Part Transportation Management in the High North
(Journal article, 2013)The demanding physical conditions of the Arctic, remote location, and uncertainty regarding the travel time can both heighten the challenges related to transportation of spare part in the region. Managing to get the ...