Blar i Vitenskapelige publikasjoner (TN-IMBM) på tittel
Viser treff 209-228 av 462
-
Influence of material factors on the determination of dynamic moduli and associated prediction models for different types of asphalt mixtures
(Peer reviewed; Journal article, 2022)In a Mechanistic-Empirical (ME) pavement design system, the dynamic modulus is used to characterise asphalt mixtures, which are affected by many factors including environmental conditions and material properties. This study ... -
The influence of the composition of water on the results of accelerated aging resistance testing of low voltage subsea cables insulation
(Peer reviewed; Journal article, 2019)The composition of water changes with temperature, for instance, the saturation rate of water in polyurethane membranes is related to the temperature. Thus, it is necessary to evaluate the influence of the composition of ... -
The influences of international standards on structural performance and fracture behavior of 3D printed long fiber composite structures
(Peer reviewed; Journal article, 2023)The material properties of the additive manufactured composite structures are usually done following international standards, that show some difference dimensionally. This study focuses on the impact-induced on the tensile ... -
Inspection planning for fatigue cracks in offshore structures by Monte Carlo simulations
(Peer reviewed; Journal article, 2019)Probability-informed inspection planning has traditionally a tendency to produce longer inspection intervals for older structures in contrast with the intuitive assumption that shorter inspection intervals are needed. In ... -
An integrated qualitative trend analysis approach to identify process abnormalities: A case of oil export pumps in an offshore oil and gas production facility.
(Journal article; Peer reviewed, 2009)Oil & gas production can be largely benefited by minimizing unwanted production losses. This can be done by effective identification of system anomalies and faults. In standard control systems these abnormalities can be ... -
Integration of value adding services related to financing and ownership: A business model perspective
(Peer reviewed; Journal article, 2019)It is an agreed fact among scholars that services are more sustainable compared to the products. By offering services, traditional companies can lock their customers into a long-term and sustainable revenue generation ... -
Internal clearance behaviour in healthy and faulty bearings
(Peer reviewed; Journal article, 2023)Internal clearance is a critical parameter in bearing design and operation because it affects the bearing's performance. It can be considered as a special type of the looseness fault. Several studies indicate that rolling ... -
Internal Corrosion Damage Mechanisms of the Underground Water Pipelines
(Peer reviewed; Journal article, 2022)Internal water pipe corrosion is a complicated problem due to the interaction of water quality parameters with pipe wall. This study presents investigations of internal pipe surface corrosion mechanisms related to water ... -
Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
(Journal article; Peer reviewed, 2018-03)Fused-deposition modeling (FDM), one of the additive manufacturing (AM) technologies, is an advanced digital manufacturing technique that produces parts by heating, extruding and depositing filaments of thermoplastic ... -
Investigation of Influence of Adjustments in Cyclist Arm Position on Aerodynamic Drag Using Computational Fluid Dynamics
(Peer reviewed; Journal article, 2020-06)In professional cycling, even small adjustments in position could mean that valuable seconds are gained over the course of a time-trial race. This study investigates the influence of arm position on the aerodynamic drag ... -
Investigation of mechanical properties of false banana/glass fiber reinforced hybrid composite materials
(Peer reviewed; Journal article, 2020)The objective of the work presented in this article is to investigate the mechanical properties of false banana/glass fiber reinforced hybrid composite materials at different fiber volume fractions and orientation of hybrid ... -
Investigation of Rotor Efficiency with Varying Rotor Pitch Angle for a Coaxial Drone
(Peer reviewed; Journal article, 2022-04)Coaxial rotor systems are appealing for multirotor drones, as they increase thrust without increasing the vehicle’s footprint. However, the thrust of a coaxial rotor system is reduced compared to having the rotors in line. ... -
An investigation of the effects and consequences of combining Expanding Dual Pin with radial spherical plain bearings
(Peer reviewed; Journal article, 2022)An expanding pin locks the pin assembly to its supports and bearings and prevents any relative movements between the surfaces in contact. In this study, the diameter changes of the bearing inner ring as a function of the ... -
Investigation of the mechanical properties of Acacia tortilis fiber reinforced natural composite
(Peer reviewed; Journal article, 2020-10)The work presented in this paper is motivated by the fact that use of natural fiber materials for structural and non-structural applications have increased within the last two decades. In addition to the known benefits of ... -
Investigation of transitional turbulence models for CFD simulation of the drag crisis for flow over a sphere
(Peer reviewed; Journal article, 2019)The drag crisis is an interesting physical phenomenon for flow over bluff bodies, where the drag coefficient suddenly drops as the Reynolds number increases. This behavior is caused by the flow transitioning from laminar ... -
Investigation of updating methods for probability-informed inspection planning for offshore structures
(Peer reviewed; Journal article, 2019)The paper presents a novel process for probability-informed inspection planning based on the following principles. 1) A description of the strength of knowledge about a problem shall be included and be accounted for in the ... -
Investigations of Microstructure and Mechanical Properties of 17-4 Ph Ss Printed by Markforged Metal X
(Peer reviewed; Journal article, 2022-10)The Markforged Metal X (MfMX) printing machine (Markforged Inc., Massachusetts, USA) is one of the latest introduced additive manufacturing (AM) devices. It is getting popular because of its safety, simplicity, and ability ... -
Joint computation offloading and deployment optimization in multi-UAV-enabled MEC systems
(Peer reviewed; Journal article, 2021-09)The combination of unmanned aerial vehicles (UAVs) and mobile edge computing (MEC) technology breaks through the limitations of traditional terrestrial communications. The effective line-of-sight channel provided by UAVs ... -
Joint description of waves and currents applied in a simplified load case
(Peer reviewed; Journal article, 2018-03)In order to perform a more accurate analysis of marine structures, joint probability distributions of different metocean parameters have received an increasing interest during the last decade, facilitated by improved ... -
Kinematic Modeling and Analysis of a Walking Machine (Robot) Leg Mechanism on a Rough Terrain
(Peer reviewed; Journal article, 2019-07)Many manmade machines and mechanisms including robots function based on the concept of nature-inspired design so that they can perform their intended duties by mimicking the working mechanisms of animals and insects. ...