Browsing Studentoppgaver (TN-IKM / TN-IMBM) by Issue Date
Now showing items 81-100 of 1213
-
Modellering av Vestas V27-225 kW vindturbinblad
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)En av de største utfordringene ved dimensjonering av vindturbiner er vindlast. Forståelse av aerodynamisk atferd er en veldig viktig faktor når en vindturbin skal konstrueres, spesielt ved utformingen av turbinens ... -
Human factors, technical and organizational issues in onshore operation center: Challenges, best practices and recommendations
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The master thesis intends to identify Human factors that include human characteristics, mistakes, working conditions, and changes in human performances, and to identify Technical challenges that include operational delays, ... -
Engineering methodology for selecting Condition Based Maintenance
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)During the last decade, condition based maintenance and condition monitoring have experienced a growing area of application. Along with the introduction of Integrated Operations (IO) in the Norwegian oil and gas industry, ... -
Evaluation of TOC concept in industrial wastewater at SART AS
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Approximately 98 % of the industrial wastewater that SART receives comes from offshore activities. Unlike municipal waste water, this wastewater contains relatively high Total Organic Carbon (TOC), and very little Nitrogen ... -
Suggested design for transport and installation of offshore wind turbines
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The state of the art today of transporting and installing offshore wind turbines is a costly endeavor, therefore, it is needed with new designs to reduce the time and cost of such operations. A new design has been presented ... -
Modellering og konstruksjonsanalyse av boligbygg med fokus på jordskjelvlaster
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)I forbindelse med prosjektering av nye bygg i Norge er laster på grunn av jordskjelv relativt nytt å ha med i dimensjoneringsprosessen. Den første norske standarden som tok for seg laster fra seismiske påvirkninger (NS ... -
Temperaturutvikling i betong
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Temperaturutvikling og egenskaper i en betong styres av bindemiddelet. Ved å bytte ut deler av sementen med pozzolan er det mulig å påvirke den totale varmeutviklingen og temperaturutviklingen. Temperaturgradienter styres ... -
Usability study of a risk based inspection software
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011)Usability, or the “ease of use” of a software application, is important in order to allow for a user to carry out the intended task in an efficient and effective manner. For a technical software, as the risk based ... -
A study of integrated operations on the norwegian continental shelf
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)In the beginning of the 21st century the Norwegian petroleum industry was faced with two possible future scenarios, the "disintegration" and the "long term" path. The "disintegration" path would involve a stagnation of the ... -
Pipelaying on uneven seabed
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011) -
Lateral buckling induced by trawl gears pull-over loads on high temperature/high pressure subsea pipeline
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)This thesis work is performed to study and understand the pipeline global response as a result of trawl gears pull-over loads triggering lateral buckling on high temperature/high pressure subsea pipeline. The external ... -
Optimization of maintenance performance for offshore production facilities
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)New technologies are becoming advanced and complex for offshore production facilities. However this advancement and complexity in technology creates a more complicated and time consuming forensic processes for finding ... -
Effective use of e-learning tool for organizational competence development and knowledge management
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The main objective of this research is to identify the possible gaps and improvements of E-learning module that implemented in Skretting company. The literature review was done to understand the meanings of comptence and ... -
Analyse og design av skjærvegger i betongutsatt for jordskjelv. En sammenligning av stedstøptevegger og prefabrikkerte veggelementer.
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Problemstillingen er å se på et reelt prefabrikkert betongelementbygg der det er ønskelig å jordskjelvdimensjonere bygget i duktilitesklassen middels duktilitet. Hovedfokuset er Skjærvegger laget av prefabrikkerte betong ... -
Analyse av menneske-induserte vibrasjoner i dekker
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Oppgava omhandler menneske-induserte vibrasjoner i dekker. Ulike lastmodeller for modellering av aerobiklaster blir presentert, og gjeldende regelverk blir gjennomgått. De ulike lastmodellene blir så benytta til å gjennomføre ... -
Drilling spare parts: Identifying and evaluating critical parameters
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Spare parts for drill rigs are a complicated and important task to be handled. The operations are run on tight schedules and costs are based on the number of days to complete the operations. There are strict regulations ... -
Miljøfokus i byggenæringen
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Endringene i klimaet begynner å bli alt stadig tydeligere, det er ingen tvil om at det må gjøres endringer for å bedre klimaet på jorden. Miljø har høy prioritering på politiske agendaer både nasjonalt og internasjonalt. ... -
Study of Acergy`s supplier database
(Masteroppgave/UIS-TN-IKM/2009;, Master thesis, 2011)Acergy Norway AS is a seabed-to-surface engineering and construction company for the offshore oil and gas industry worldwide. They deliver services in many market segments such as Inspection and Maintenance and Repair ... -
Evaluating non-destructive testing (ndt) methods used for the inspection of flowlines on offshore production facilities
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)The importance and criticality of the processes and equipments within the Oil & Gas industry highlights the requirement for more reliable, available and maintainable production activities and facilities. These requirements ... -
Development of an assessment procedure for environmental consequence in RBI analysis
(Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)Even with the recent developments in renewable energy, oil & gas are still our most important energy source today. This will also be the case in the foreseeable future, but new demands are constantly being forced on the ...