Blar i Studentoppgaver (TN-IKM / TN-IMBM) på emneord "FEM"

Viser treff 1-6 av 6

    • Development concepts for the northern Caspian sea 

      Sultabayev, Arkhat (Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)
      Today the Northern Caspian Sea is considered to be a very perspective region for oil and gas growth. However, the challenges encountered in the Northern Caspian Sea are not usually met in such combination in another regions, ...

    • Dynamic Analysis and Finite Element Modeling of a Floating Bridge 

      Johnsen, Erland Soli (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-14)
      With the aim of reducing the travel time of the coastal highway E39 by substituting ferries with bridges and tunnels, the National Public Road Administration project “Ferry Free E39” includes several fjord crossings demanding ...

    • Finite Element Models for Integrity Assessment of Flexible Riser with Damaged Tensile Wires 

      Haugen, Mathias O. M. (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-06)
      Many of the flexible risers in service do not meet their documented service life. A common failure mode is the rupture of the abrasive external layer which, in itself, is not critical, but seawater ingress may corrode ...

    • Geometry Optimization of Glass Reinforced Plastic (GRP) Subsea Protection Covers 

      Tauqeer, Muhammad Ahmad (Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06)
      Subsea pipelines are exposed to fishing activity loads and drop-object impacts. Protection covers are used to protect the pipelines from these loads and are manufactured from Glass Reinforced Plastics (GRP) for high strength ...

    • Practical comparison of crack meshing in ANSYS mechanical APDL 19.2 

      Bjørheim, Fredrik (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)
      Structures under cyclic loading are typically subjected to formation of cracks, and thereafter crack propagation. To be able to analyse the crack propagation numerically with the goal of estimating a structure or a structural ...

    • Rotasjonsstivhet av sveiste T-knutepunkter, sammensatt av kvadratiske hulprofiler utsatt for i-planet bøyning 

      Buzaljko, Mirza (Masteroppgave/UIS-TN-IKM/2011;, Master thesis, 2011)
      Kvadratiske og rektangulære hulprofiler er benyttet i et bredt spekter rammer og fagverk, både i landbasert byggevirksomhet og offshoreindustrien. Sammenføyningen forekommer ofte ved at gurt og stav er sammensveist normalt ...