Blar i Studentoppgaver (TN-IKM / TN-IMBM) på emneord "VDP::Teknologi: 500::Maskinfag: 570"

Viser treff 1-5 av 5

    • Cost Improvement of Seal Retainer 

      Zurcher, Erik Årdal (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06)
      The objectives of the thesis are to optimize the tip angle of the seal retainers and to determine cheaper materials that are appropriate for the application of the tool. Seal retainers are used to retain seals on valve ...

    • Expanding PIN system – Combined radial and axial locking system 

      Akhtar, Muhammad Maaz (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)
      In the side by side plate joints or flange joints, the standard practice is to have a bolted connection that provides the axial clamping load as well as, avoiding any radial or rotational movement. This can be problematic ...

    • Investigation of critical time and temperature for pitting corrosion on 316SS cladding 

      Akbas, Agit (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-30)
      The austenitic stainless steel 316L is a very common and low carbon stainless steel grade. 316L has great corrosion characteristics under harsh conditions such as seawater, acidic medias etc. The presence of molybdenum ...

    • Microstructural Analysis of Selective Laser Melted AlSi10Mg 

      Strøm, Magnus (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-14)
      Selective laser melting (SLM) is a manufacturing method where computer models are built layer by layer using a laser as heat source to melt powder in selected areas. The method allows for creating parts that would be ...

    • Microstructure and Mechanical properties of a Reversed Engineered Inconel 625 Produced by Direct Energy Deposition 

      Birihane, Minas (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)
      The purpose of this study is to investigate the micro-structural and mechanical properties of reverse engineered Inconel 625 manufactured by direct energy deposition (DED). A costume made 4kW robotized DED machine was used ...