Browsing Studentoppgaver (TN-IKM / TN-IMBM) by Subject "maskinkonstruksjoner"
Now showing items 1-6 of 6
-
A comparison of cold strained and solution annealed bolts in super duplex stainless steel in regards to stress corrosion cracking and pitting resistance
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-06-08)Corrosion place a high cost on the society and selecting the wrong materials in certain environments may have catastrophic consequences. When selecting materials there is also the different manufacturing methods to consider ... -
CFD analysis of temperature development due to flow restriction in pipeline
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-05-29)If the pressure difference in a pipe, up- and downstream of a restriction orifice, is above a critical value, the flow becomes choked and an under-expanded jet occurs. For very large pressure differences, the gas experiences ... -
Construction and analysis of atex nitrogen generator frame with components
(Master thesis, 2015-07)This Master thesis will include the design and structure of a nitrogen generator that shall be approved for internal lifting on offshore platforms. The generator shall be in accordance with the harmonized standards: NORSOK ... -
Effect of 3D printing on the microstructure and mechanical properties of an Inconel 718 Nickel-alloy (UNS N07718)
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Flow measuring instruments are important for the oil and gas industry. These instruments are exposed to hostile environments during operation. These hostile environments demands high quality materials with excellent ... -
Torque Transfer System for offshore Turret Production System
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06)Turret production systems allow Floating Production Storage and Offloading (FPSO) units to weathervane and thus significantly reduce environmental loads on the mooring system. There are several different variants of such ... -
Wave energy converter
(Masteroppgave/UIS-TN-IKM/2012;, Master thesis, 2012)The principal objective of this thesis has been to study and research on Water Energy Convertors(WEC) devices, carrying out theoretical and analytical approximations. Nowadays, the demand of renewable energy resources is ...