Show simple item record

dc.contributor.authorBruset, Simon
dc.descriptionMaster's thesis in Offshore technologyen_US
dc.description.abstractThis thesis is about the modification of an ROV mounted Suction Kit; a reversible centrifugal pump designed and manufactured by Oceaneering AS. The Kit mainly contains a centrifugal pump driven by a hydraulic pump motor and a flow regulator enabling the function of a reversible flow. Oceaneering AS gave me the challenge to improve the Suction Kit to meet requirements and specifications put forward by a client. In addition Oceaneering also presented some internal requirements, where the most important one being to keep the dimensions of the Suction Kit as it is. There are several requirements, but in this thesis it will be focused on increasing the flow rate from 1300 liter/min to 2000 liter/min. This is an increase of 700 liters or 53%. In regard to pumps, an increase in flow rate of over 50% while keeping dimensions unchanged, is a challenge. The modifications performed in this thesis are based on basic pump theory and test results. Some of the changes include modifying the impeller, improving the flow path and removal of the flow regulator. The maximum flow achieved was 1823 liters/minute.en_US
dc.publisherUniversity of Stavanger, Norwayen_US
dc.subjectoffshore teknologien_US
dc.titleModification of suction kiten_US
dc.typeMaster thesisen_US
dc.subject.nsiVDP::Technology: 500::Marine technology: 580en_US

Files in this item


This item appears in the following Collection(s)

  • Studentoppgaver (TN-IKM / TN-IMBM) [1211]
    Master- og bacheloroppgaver i Konstruksjoner og materialer / Maskin, bygg og materialteknologi (maskinkonstruksjoner, byggkonstruksjoner og energiteknologi) / Masteroppgaver i Offshore teknologi: industriell teknologi og driftsledelse - Offshore technology: industrial Asset management / Masteroppgaver i Offshoreteknologi : offshore systemer (konstruksjonsteknikk og marin- og undervannsteknologi-subsea technology)

Show simple item record