Blar i Master's theses (TN-IPT 2007-2017) på tittel
Viser treff 238-257 av 533
-
Geochemical modeling of low salinity core flooding
(Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-06-17)Extensive research the last decades has shown that lowering the salinity and ionic compostion of injection water can improve thre oil recovery. The mechanisms causing low salinity water to give favorable reservoir conditions ... -
Geologic mapping and investigation into tectonic control on deposition. A case study of the Doumena Fault Block, Greece.
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06-29)The Doumena Fault Block is located onshore in the southern part of the Gulf of Corinth Rift system. The rift system consists of several east – west oriented half grabens that offers an excellent opportunity to study rotated ... -
Geological Mapping and Investigation into a Proposed Syn-rift Alluvial Fan Deposit in the Kerpini Fault Block, Greece.
(Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06)The Kerpini Fault Block is located in the southern part of the Gulf of Corinth rift system. The rift system consists of several east-west orientated half-grabens with associated syn-rift sediments. Kerpini Fault Block is ... -
Geological mapping of the south-central Gulf of Corinth coastal fault system - Greece
(Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-06)This thesis is related to geological mapping of the south-central Gulf of Corinth (Greece), providing an interpretation for the major fault systems towards the east and the west of much studied coastal fault segments: ... -
Geophysical analysis in the Grane Area
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-16)Conventional seismic stack are not very efficient to delineate the hydrocarbon bearing interval within the Lower Heimdal sandstones in the Grane area, as the reflectivity of top Lower Heimdal are subtle. This becomes more ... -
Geopolymering av norite
(Masteroppgave/UIS-TN-IPT/2013;, Master thesis, 2013-07-29)This thesis on ‘’Geopolymerization of Norite’’ has been a study of plugging materials for plug and abandonment operations, and the different requirements for plug and abandonment operations based on Norsok D-010 standard. ... -
Gravel packing methods in long blank sections with near vertical regime in openhole
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-16)Gravel packing is a well-known method in sand control where stabilizing the formation with gravel prevents the production of formation sand. Longer and more complex completion operations are making the business of ... -
Hafnium isotope geochemistry on detrital zircons in Mesozoic succession of the Barents Sea to enhance the provenance knowledge of potential Hydrocarbon reservoir succession.
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-02-13)Technological advances have led to the development of various methods that allows us to more accurately pinpoint the timing of geological events using geochronology. One of the most established and acknowledged techniques ... -
Heat Recovery Mechanism for Non Condensable Geothermal Fractured Reservoirs by CO2 Injection and Well Heat Insulating
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-06)In this thesis we analyzed the potential use of operating geothermal plants with water and CO2 as working fluids using a geothermal simulator TOUGH2 module EOS1 and EOS2, respectively. We also studied the sensitivities of ... -
Heat transfer measurements in stirred, cylindrical cells containing ethylene oxide (EO) and tetra hydro furan (THF) hydrate – water solutions at temperatures between 1 – 4 °C as function of amounts and volume of hydrates present in the solutions.
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-30)It is believed that heat transfer plays a major role in hydrate formation, and is also dependent on the hydrate concentration. Heat transfer during hydrate growth is an important process, which deserves a great depth of ... -
Heave effects on Drill String during connections
(Masteroppgave/UIS-TN-IPT/2012;, Master thesis, 2012)During the make-up and break-out of the connections, the drill string is wedged in the rotary table and the top of the drill string follows the platform heave movement as the bit is off bottom. This oscillation may be ... -
High-resolution heavy mineral stratigraphy of selected Precambrian successions underlying the Nama Group in Namibia
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-07-13)This project research the provenance of Precambrian formations: Kuibis Formation, Holgat Formation, Numees Formation, Blaubeker Formation, Matchless Amphibolite, Aubures Formation, and Klein Aub Formation from Namibia. The ... -
High-resolution heavy mineral studies on “black sands” from the Nama Group (Fish River Subgroup) in Namibia – Part I
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-07)A detailed high-resolution study is applied on selected samples to decipher the provenance for these deposits. The samples analysed in the project are placer deposits (“black sands”) from the Nama Group (Fish River Subgroup) ... -
High-resolution heavy mineral studies on “black sands” from the Nama Group (Fish River Subgroup) in Namibia – Part II.
(Masteroppgave/UIS-TN-IPT/2017;, Master thesis, 2017-07)“Black sands” from a presumed heavy mineral placer of the Nama Group in Namibia will be studied in detail. The samples for this thesis are collected from various outcrops belonging to the Fish River Subgroup in the Nababis ... -
Hole cleaning and hydraulics
(Masteroppgave/UIS-TN-IPT/2010;, Master thesis, 2010)Cuttings transport and efficient hole cleaning remains a vital challenge when planning and drilling vertical, deviated, high angle and extended reach wells. Optimization of cuttings transport depends on so many factors- ... -
Hook load measurement correction with non-uniform movement
(Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-06-15)In the recent years, oil and gas exploration and production are being carried out in extremely harsh and challenging environmental conditions. Hence, accurate prediction of the hook load is essential in order to minimise ... -
Hook-load measurements made with a draw-works as a function of sensor placement and dynamic conditions
(Masteroppgave/UIS-TN-IPT/2014;, Master thesis, 2014-06-16)As more oil blocks get explored for, the search and drilling for oil has become more daunting today, than ever before. Explorers and drillers have had to deal with harsh conditions of temperature, pressure, ... -
Horizontal well oriented perforation skin factor: A numerical analysis of skin factor reduction by off-setting perforation phasing from 360 degree to 350/10 degree
(Masteroppgave/UIS-TN-IPT/2015;, Master thesis, 2015-06-15)Formation damage has been a major topic of research and cased and perforated skin factor quantification has received significant attention which has resulted in some truly remarkable publications. The inherent importance ... -
How to apply a two-phase model from fluid mechanics to study cell migration mechanisms
(Masteroppgave/UIS-TN-IPT/2016;, Master thesis, 2016-06-15)The classical Keller-Segel model of cell migration due to random motion and chemotaxis, has, as a result of its intuitive simplicity and ability to replicate key behavior of chemotactic populations, provided a foundation ... -
Hvordan kan dagens SUT-ordning forbedres?
(Masteroppgave/UIS-TN-IØRP/2017;, Master thesis, 2017-05-23)