Blar i Department of Energy and Petroleum Engineering (TN-IEP) på tittel
Viser treff 514-533 av 572
-
Tapt sirkulasjonsmateriale - Påvirkning på viskøse egenskaper til vannbaserte borevæsker: Karakterisering av Herschel-Bulkley-væsker ved hjelp av dimensjonsløse skjærhastigheter.
(Bachelor thesis, 2023)Vannbaserte borevæsker brukes vanligvis i olje- og gassindustrien på grunn av deres gunstige miljøegenskaper og evne til å bore effektivt i myke og uavstivede formasjoner. Tapt sirkulasjonsmateriale (LCM) blir tilsatt for ... -
Techno-economic assessment of decarbonisation technologies for the iron and steel industry
(PhD Theses;704, Doctoral thesis, 2023)Rapid decarbonisation of all segments of the economy is essential to limit the global mean surface temperature rise to 1.5ºC. Industries contribute to approximately a quarter of the global energy related emissions but have ... -
Techno-Economic Assessment of Hydrogen Production from Seawater
(Master thesis, 2021)Population growth and the expansion of industries have increased energy demand. In addition, the use of fossil fuel as an energy source produces greenhouse gases and increases air pollution. As a result, countries are ... -
Techno-economic assessment of hydrogen production from seawater
(Peer reviewed; Journal article, 2023)Population growth and the expansion of industries have increased energy demand and the use of fossil fuels as an energy source, resulting in release of greenhouse gases (GHG) and increased air pollution. Countries are ... -
Techno-economic assessment of low-carbon ammonia production
(Master thesis, 2021)Decarbonization of the ammonia production industry would require the use of innovative low-carbon production technologies. The use of electrolyser-based ammonia production instead of steam methane reforming may potentially ... -
TEM, SEM and optical microscopy analyses of Berea sandstone cores flooded with sodium silicate polymers for IOR purposes
(Masteroppgave/UIS-TN-IER/2018;, Master thesis, 2018-07-13)Improved Oil Recovery (IOR) is a “hot topic” in the Oil and Gas industry. Sodium silicate (SS) is a polymer which can be injected into a reservoir as a fluid and due to polymerization it precipitates into a semi rigid gel ... -
Temperature-Dependent Classification of Geopolymers Derived from Granite Designed for Well Cementing Applications
(Peer reviewed; Journal article, 2023)Alternative materials such as geopolymers appear to have potential advantages compared to Portland cement. However, the application of geopolymers for all sections of the well is still a major challenge due to the difference ... -
The Application of Data Analytics and Machine Learning for Formation Classification and Bit Dull Grading Prediction
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)The oil and gas industry, especially its upstream part generates a massive amount of data. The proper data collection and processing are the vital elements of reducing the non-productive time and increasing the drilling ... -
The Effect of Adsorption of Crude Oil Polar Organic Components on Wettability and EOR Potential by Smart Water on Sandstone Cores
(Master thesis, 2021)Reservoir wettability is widely acknowledged as one of the most influential parameters in oil recovery processes. The complexity of the underlying crude oil brine rock (CoBR) interactions at the interface boundaries acting ... -
The Effect of Injection Rate and Oil Viscosity on Oil Recovery by Waterflooding on Sandstone Cores
(Master thesis, 2021)With every passing day, the rise for developing and optimizing oil recovery methods and techniques grows, since the global demand for energy is increasing exponentially. Water flooding is still regarded as the most widely ... -
The Impact of Brine Salinity/Concentration on Small Amplitude Oscillatory Shear (SAOS) Flow Material Functions of EOR Polymers.
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-30)Flopaams polymers are water-soluble polymers which display a significant degree of sensitivity to salinity changes as they consist of negative charges along their molecular chains. Electrostatic charges present along the ... -
The Physics of Buoyancy, Effective Tension and Pinching-off Effect
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-13)The thesis addresses at the beginning the understanding of the development of forces that result in buoyancy, and the concept of effective forces. Then, it continues more in-depth with an application of effective forces ... -
The promotional effect of Ca, Mg, and Rh on the activity of Ni-based catalysts from hydrotalcite precursor for dry reforming of methane
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)The world strives towards a way to decrease CH4 and CO2 emissions to the atmosphere. A way to do this is to utilize these gases in processes that can make useful products. One of these are dry reforming of methane (DRM), ... -
Theoretical Modeling of the Impact of Salt Precipitation on CO2 Storage Potential in Fractured Saline Reservoirs
(Peer reviewed; Journal article, 2020)Deep saline reservoirs have the capacity to hold large volumes of CO2. However, apart from the high brine salinity, which poses an injectivity challenge, a high percentage of saline reservoirs are also fractured. The ... -
Theoretical study of single transition metal atom catalysts supported on two-dimensional Nb2NO2 for efficient electrochemical CO2 reduction to CH4
(Peer reviewed; Journal article, 2022-05)The design of highly efficient catalysts for electrochemical reduction CO2 (ECR) to value-add chemicals and fuels is important for CO2 conversion technologies. In this work, earth abundant transition metal (TM = V, Cr, Mn, ... -
Thermodynamic analysis of an ejector-absorption heat transformer utilizing H2O-LiBr and a new working fluid H2O-[EMIM][DMP]
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06)The focus on human impact on the environment has increased within recent decades. Several large concerns regarding the threats to the stability of the environment have been brought up in public discussions. Amongst the ... -
Time-planning of permanent plug and abandonment with Monte Carlo simulation
(Bachelor thesis, 2021)Permanent plug and abandonment (PP&A) is a necessary task that few oil and gas companies look forward to. All offshore operations are costly, and PP&A is no exception, it also does not provide any income after it is done ... -
Towards a Low-Carbon Future for Offshore Oil and Gas Industry A Smart Integrated Energy Management System with Floating Wind Turbines and Gas Turbines
(Peer reviewed; Journal article, 2023)Decarbonizing offshore oil and gas fields is crucial in the global fight against climate change. To achieve this objective, the offshore oil and gas industry has embraced innovative energy systems, including microgrids ... -
Trajectory Control Optimization Using the RSS Model
(Master thesis, 2021)Directional drilling has become a standard method to drill a well since the last decades, mainly caused by directional technologies and methods developments. The next step that the drilling industry is ready to take is to ... -
Trajectory Control Optimization Using the RSS Model
(Studentoppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-14)Directional drilling has become a standard method to drill a well since the last decades, mainly caused by directional technologies and methods developments. The next step that the drilling industry is ready to take is to ...