Blar i Department of Energy and Petroleum Engineering (TN-IEP) på tittel
Viser treff 263-282 av 572
-
Friction coefficcient in wells with black sticky stuff and scale
(Bachelor thesis, 2022)Scale buildup is a common problem in oil and gas producing wells all over the world. It gives difficulties to both the production of oil and gas, as well as well intervention operations. The buildup of scale generates more ... -
The Fundamental Principles and Standard Evaluation for Fluid Loss and Possible Extensions of Test Methodology to Assess Consequences for Formation Damage
(Peer reviewed; Journal article, 2021-04)Industry testing procedures such as ANSI/API 13B-1 describe a method for measuring fluid loss and studying filter-cake formation against a medium of either a filter paper or a porous disc, without giving information about ... -
Fundamentals and physical principles for drilled cuttings transport – Cuttings bed sedimentation and erosion
(Peer reviewed; Journal article, 2021)The increasing necessity of challenging wellbore structures and drilling optimization for improved hole cuttings cleaning has been growing along time. As a result, operator companies have been researching and applying ... -
Further Development and Testing of an Autonomous Drilling Rig and Control Algorithms for Improved Drilling Performance
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-07-04)This thesis documents the contributions made by Ole André Hjelm and Simen Jøsang Nilsen to improve and further develop a small-scale autonomous drilling rig. The rig has been used to compete in an international student ... -
Gassbobledynamikk og trykkoppbyggingsstudier i simulert brønnboring
(Bachelor thesis, 2022)Denne oppgaven presenterer gassbobledynamikken i eksperimentelle studier og datasimulering. Totalt 13 væsker har blitt syntetisert, med et bredt spekter av viskositet og tetthet. Den åpne brønnriggen eksperimentelle studien ... -
Gel Pills for Downhole Pressure Control during Oil and Gas Well Drilling
(Peer reviewed; Journal article, 2020)During drilling of petroleum or geothermal wells, unforeseen circumstances occasionally happen that require suspension of the operation. When the drilling fluid is left in a static condition, solid material like barite may ... -
Global ecosystem service values in climate class transitions
(Peer reviewed; Journal article, 2020-01)Ecosystem service assessments facilitate the valuation of nature and support decision-making. Ecosystem services are connected to climate; however, ecosystem service values affected by climate change remain unclear. We ... -
Gravitasjonsdrenering av flerfasestrømning med forskjellige reologiske egenskaper i porøse media
(Bachelor thesis, 2022)Formålet med oppgaven var å studere hvordan enfase- og flerfasestrømning av New- tonske og ikke-Newtonske fluider påvirkes av ulike volum av et porøst medium. Ved undersøkelse av de ulike fluidene og ulike volum av det ... -
Gravitasjonsdrenering av flerfasestrømning med forskjellige reologiske egenskaper i porøse media.
(Bachelor thesis, 2022)Formålet med oppgaven var å studere hvordan enfase- og flerfasestrømning av Newtonske og ikke-Newtonske fluider påvirkes av ulike volum av et porøst medium. Ved undersøkelse av de ulike fluidene og ulike volum av det porøse ... -
Heat Transfer Modeling and Simulation in Geothermal Wells
(Masteroppgave/UIS-TN-IEP/2018;, Master thesis, 2018-06-15)Geothermal energy is among the fastest growing renewable energies. In the field of geothermal, energy conversion refers to the power plant technology that converts the hot geothermal fluids into electric power. The two ... -
Heat Transportation in Geothermal Wells - A Comparison of Laboraotry-Scale and Full-Scale Construction at Bryne VGS
(Masteroppgave/UIS-TN-IEP/2019;, Master thesis, 2019-06-15)This thesis describes and investigates heat transfer in geothermal wells by investigating a real-scale geothermal system and a laboratory setup, and exploit the boundary conditions. -
Hole cleaning and wet-granular rheology of rock cutting beds: Impact of drilling fluid composition
(Peer reviewed; Journal article, 2022)Cuttings-beds formation is an issue that must be considered during all wellbore drilling operations. This problem increases at highly deviated or horizontal wells, where cuttings removal efficiency becomes one of the most ... -
Holistic management of a smart city thermal energy plant with sewage heat pumps, solar heating, and grey water recycling
(Peer reviewed; Journal article, 2023)This article introduces a modern thermal energy plant consisting of sewage heat pumps, a biogas boiler, thermal solar collectors, and grey water recycling. It further discusses advanced methods to achieve energy efficiency ... -
Hydraulic Behavior in Cased and Open Hole Sections in Highly Deviated Wellbores
(Chapter, 2019)In this paper we present results from flow loop experiments with an oil-based drilling fluid with micronized barite as weight materials. The use of micronized barite allows using lower viscosity drilling fluid, providing ... -
HYDROGEN FUELED GAS TURBINE (GT) TECHNOLOGIES AS PART OF THE SOLUTION TO DECARBONIZE ENERGY SECTOR
(Master thesis, 2021)Human activities caused significant greenhouse gas emissions since industrial revolution which contributes to the global warming. To limit the emissions, the global energy system shall transform from a fossil-based energy ... -
Hydrogen Safety Considerations: Mitigating Risks and Securing Operations in Enclosed Spaces
(Peer reviewed; Journal article, 2023)The increased interest in hydrogen as a versatile and environmentally friendly energy carrier has led to its recognition as a potential solution for addressing environmental concerns and challenges associated with transitioning ... -
A Hydrogen-Fueled Micro Gas Turbine Unit for Carbon-Free Heat and Power Generation
(Peer reviewed; Journal article, 2022)The energy transition with transformation into predominantly renewable sources requires technology development to secure power production at all times, despite the intermittent nature of the renewables. Micro gas turbines ... -
Identification and analysis of Potential Retarders for Geopolymers Designed for Well cementing
(Masteroppgave/UIS-TN-IEP/2020;, Master thesis, 2020-06-15)Ordinary Portland cement (OPC) is the primary material, which is used in oil well cement, isolation formation and plug and abandonment. OPC has many advantages and some limitations reviewed by different authors. The ... -
Identification of Nonlinear Conservation Laws Using Symbolic Neural Networks
(PhD Theses;731, Doctoral thesis, 2023)Nonlinear dynamical systems are omnipresent in nature, commonly seen in many disciplines such as physics, biology, chemistry, climate science, and engineering. In this thesis, we introduce several new ideas by integrating ... -
Impact of Admixtures on Pumpability and Short-Term Mechanical Properties of Rock-Based Geopolymer for Zonal Isolation and Well Abandonment
(Bachelor thesis, 2021)Ordinary Portland Cement (OPC) is the primary binder material used for primary cementing and plug and abandonment (P&A). This material has many advantages and some shortages, and it is well-studied when it comes to its ...