• Developing Models of Road Tunnels with Petri Nets 

      Gjermundstad, Joakim Andreas Oppedal (Master thesis, 2022)
      1200 road tunnels have been built in Norway's European, national, and county road networks. Length, incline, and traffic volume vary, and it may cross through fjords or mountains, have one or two runs, and be near or far ...
    • Developing the SHPIA 2.0 Architecture for the Raspberry Pi 

      Panengstuen Lars-Erik (Master thesis, 2023)
      Sensors and electronic devices has invaded out daily lives. These devices provides an opportunity to collect invaluable data for research purposes. This research has the ability to give us an insight into lifestyle illnesses ...
    • Development of a game as a tool for enhancing learning of control theory 

      Grindalen, Jonas (Bachelor thesis, 2021)
      Spillbasert læring har vist seg til å være et effektiv verktøy for pedagogiske formål, og har vist en positiv effekt ved studenters motivasjon. Formålet med denne avhandlingen var å designe et pedagogisk kortspill, med mål ...
    • The devil is in the details: Whole Slide Image acquisition and processing for artifacts detection, color variation, and data augmentation: A review. 

      Kanwal, Neel; Pérez-Bueno, Fernando; Schmidt, Arne; Engan, Kjersti; Molina, Rafael (Peer reviewed; Journal article, 2022)
      Whole Slide Images (WSI) are widely used in histopathology for research and the diagnosis of different types of cancer. The preparation and digitization of histological tissues leads to the introduction of artifacts and ...
    • Diagnosis, Localization, and Prognosis of Melanoma in WSIs with a Complete Pipeline by Digital Pathology 

      Benjaminsen, Edvin; Bø-Sande, Marie (Master thesis, 2023)
      The most dangerous and aggressive form of skin cancer is melanoma, responsible for 90% of skin cancer mortality. Early detection of melanoma plays a crucial role in the prognostic outcome. The diagnostic has to be performed ...
    • Digital Architecture for an Automated Drilling Rig 

      Gilje, Jonas Emanuel; Levang, Lars Sverre; Bø, Vidar André (Bachelor thesis, 2022)
      The objective of this thesis was to develop the digital architecture for a small-scale drill rig intended for use by the Drillbotics team at the Uni- versity of Stavanger, for an international student competition by the ...
    • Digital Architecture for an Automated Drilling Rig 

      Bø, Vidar André; Levang, Lars Sverre; Gilje, Jonas Emanuel (Bachelor thesis, 2022)
      The objective of this thesis was to develop the digital architecture for a small-scale drill rig intended for use by the Drillbotics team at the Uni- versity of Stavanger, for an international student competition by the ...
    • Digital Architecture for an Automated Drilling Rig 

      Gilje, Jonas Emanuel; Levang, Lars Sverre; Bø, Vidar André (Bachelor thesis, 2022)
      The objective of this thesis was to develop the digital architecture for a small-scale drill rig intended for use by the Drillbotics team at the University of Stavanger, for an international student competition by the ...
    • Digital e-læringsplattform for olje- og gassektoren i forbindelse med The Open Group OSDU Forum 

      Rostem, Alan Shakhewan; Babic, Nemanja (Bachelor thesis, 2021)
      Flere studier er rettet mot å forbedre brukergrensesnittet og den generelle brukeropplevelsen. Ulike designprinsipper brukes under utviklingsprosessen og hjelper til å forme produktet på en ønsket måte. Et av de mest ...
    • Digital e-læringsplattform for olje- og gassektoren i forbindelse med The Open Group OSDU Forum. 

      Rostem, Alan Skakhewan; Babic, Nemanja (Bachelor thesis, 2021)
      Flere studier er rettet mot å forbedre brukergrensesnittet og den generelle brukeropplevelsen. Ulike designprinsipper brukes under utviklingsprosessen og hjelper til å forme produktet på en ønsket måte. Et av de mest ...
    • Digital Tunnel Twin Using Procedurally Made 3D Models 

      Nohut, Berke Kagan (Master thesis, 2021)
      A digital twin is a dynamic information model that provides real-time monitoring and controlling functionalities by connecting the physical and virtual environments. This thesis focuses on the road tunnel use case for the ...
    • Digital Waste Management - detection technology 

      Holmesland, Christoffer René Haaland (Master thesis, 2021)
      In this thesis, the goal has been to improve the data flow from the garbage trucks in Halden municipality. We begin by designing, building, and installing a data capture unit to collect images of the collected waste. Machine ...
    • Distributed Ledger Technology Based Integrated Healthcare Solution for Bangladesh 

      ISLAM, MD. ARIFUL; ISLAM, MD. ANTONIN; JACKY, MD. AMZAD HOSSAIN; AL-AMIN, MD.; MIAH, MD. SAEF ULLAH; Khan, Md Muhidul Islam; HOSSAIN, MD. IQBAL (Peer reviewed; Journal article, 2023)
      Healthcare data is highly sensitive and must be safeguarded. Personal and sensitive data, such as names and addresses, is stored in Encrypted Electronic Health Records (EHRs). This paper proposes a Blockchain-based distributed ...
    • Distributed Storage with Strong Data Integrity based on Blockchain Mechanisms 

      Nygaard, Racin (Masteroppgave/UIS-TN-IDE/2018;, Master thesis, 2018-06-15)
      A blockchain is a datastructure that is an append-only chain of blocks. Each block contains a set of transaction and has a cryptographic link back to its predecessor. The cryptographic link serves to protect the integrity ...
    • Distributed workflow based approach for eliminating redundancy in virtual enterprising 

      Davidrajuh, Reggie (Journal article; Peer reviewed, 2013-01)
      The existence of redundancy is a serious problem in virtual enterprise in which a number of collaborating enterprises join together to manufacture and sell a class of product for a time-limited period. This paper proposes ...
    • Diversification for HotStuff through WebAssembly 

      Aspøy, Sander Tunge; Larsen, Helene (Master thesis, 2021)
      By design, the goal of Byzantine Fault Tolerant (BFT) protocols is to protect against malicious or malfunctioning nodes. A BFT protocol in itself is only as secure as the system it is running on. In a perfect world, this ...
    • Diversification for HotStuff through WebAssembly 

      Aspøy, Sander Tunge; Larsen, Helene (Master thesis, 2021)
      By design, the goal of Byzantine Fault Tolerant (BFT) protocols is to protect against malicious or malfunctioning nodes. A BFT protocol in itself is only as secure as the system it is running on. In a perfect world, this ...
    • Domain Restricted Types for Improved Code Correctness 

      Fløysvik, Nicolas (Masteroppgave/UIS-TN-IDE/2019;, Master thesis, 2019-06)
      ReDi is a new static analysis tool for improving code correctness. It targets the C# language and is a .NET Roslyn live analyzer providing live analysis feedback to the developers using it. ReDi uses principles from formal ...
    • Dynamic enterprise architecture - from static to dynamic models 

      Latifov, Artur (Masteroppgave/UIS-TN-IDE/2012;, Master thesis, 2012)
      Nowadays the most commonly used technologies in Enterprise Architecture modeling are static. BPMN is one of such technologies, which is used widely for drawing models of business processes. Limitation of BPMN is that it ...
    • Dynamic redundancy scaling for client load dynamics 

      Wu, Yinjun (Masteroppgave/UIS-TN-IDE/2010;, Master thesis, 2010)
      This paper presents the mechanism and implementation of dynamically redun- dancy scaling for client load dynamics. The scaling is about the control of max- imum and minimum counter of replicas which provide identical ...