Blar i Department of Mechanical and Structural Engineering and Materials Science (TN-IMBM) på tittel
Viser treff 526-545 av 1686
-
E39 and Slipforming of environmental-friendly concrete
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)Slipforming is a construction method that has been used in many years for production of concrete structures and it is mainly suited for tall structures such as towers, bridge columns, silos, and offshore platforms with ... -
Eastern-Mediterranean Metocean Design Basis
(Masteroppgave/UIS-TN-IKM/2016;, Master thesis, 2016-12-23)Energy is one of the basic requirements of sustainable development of civilizations. Mankind is moving further to harsher environments, e.g. marine and arctic environments, to sustain energy production. Technology evolution ... -
EBSD and TEM study of DMD manufactured cp-TI (grade 2)
(Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06-29)Two components, 3D printed by Norsk Titanium components, through a direct metal deposition plasma transferred arc. An additive layer manufacturing technique. One made of a single wire layer thin sample, and one made of two ... -
Eco-friendly and cost-effective slab for an office building
(Bachelor thesis, 2022)It is very popular to use prefabricated concrete elements instead of cast-in-situ slabs in many different construction buildings. The background of this thesis is to study how this apply to large construction buildings as ... -
Effect and consequence analysis of expanding PIN-technology in various types of heavy machinery
(PhD thesis UiS;, Doctoral thesis, 2023)Expanding pin systems can be applied in any joint, moveable, or fixed, in any type of machine, crane, or equipment, in almost any type of industry, globally. There are a variety of different versions of expanding pins ... -
Effect of 3D printing on the microstructure and mechanical properties of an Inconel 718 Nickel-alloy (UNS N07718)
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)Flow measuring instruments are important for the oil and gas industry. These instruments are exposed to hostile environments during operation. These hostile environments demands high quality materials with excellent ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)Bruken av stålarmering i form av armeringsjern har vært brukt i mange år for å forbedre strekk- og bøyestyrken til betongelementer. Forskningen og utviklingen innen betongfeltet utvides stadig på grunn av at betong er det ... -
Effect of basalt minibars and steel fibers on the mechanical behavior of concrete.
(Bachelor thesis, 2021)The use of steel reinforcement in the form of rebar has been used for many years to improve the tensile and flexural strength of concrete elements. The research and development within the field of concrete is ever expanding ... -
The Effect of CO2 Curing on Cement-Based Materials
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-15)Early carbonation curing of concrete elements has been shown to be a promising sustainable technology for CO2 capture and utilization, which would be beneficial for the environment. It has been found that carbonation curing ... -
Effect of different source terms and inflow direction in atmospheric boundary modeling over the complex terrain site of Perdigão
(Peer reviewed; Journal article, 2023)Assessing wind conditions in complex terrain requires computational fluid dynamics (CFD) simulations incorporating an accurate parameterization of forest canopy effects and Coriolis effects. This study investigates how ... -
Effect of electron beam welding on the microstructure and mechanical properties of nickel alloys
(Masteroppgave/UIS-TN-IKM/2014;, Master thesis, 2014-06-13)The effect of electron beam welding on the precipitation strengthened Ni-base superalloys Inconel 718 and Custom Age 625 PLUS have been investigated. Solidification of the weld metal in these alloys terminates in a eutectic ... -
Effect of hydrogen on mechanical properties and fracture of martensitic carbon steel under quenched and tempered conditions
(Peer reviewed; Journal article, 2020)The change in the mechanical properties of tempered high strength carbon steel (AISI 4130) due to hydrogen embrittlement (HE) has been investigated using slow strain rate tensile tests (SSRT). The heat treatment processes ... -
Effect of Hydrogen on the Mechanical Properties of High Strength Steels
(Master thesis, 2021)The main purpose of this experiment is to compare the mechanical properties of hydrogen charged and uncharged samples. This thesis work started with the machining samples of AISI 1074 rectangular bar into tensile test ... -
Effect of Interference Size on Contact Pressure Distribution of Railway Wheel Axle Press Fitting
(Peer reviewed; Journal article, 2023)Mechanical couplings in engineering usually use interference fits to connect the shaft and hub. A railway wheel axle is a press fit that is connected by interference and can be subjected to bending stress. In loaded press ... -
The effect of laser surface melting on the retained austenite and wear properties of AISI D2 tool steel
(Peer reviewed; Journal article, 2021)In this study the effect of laser surface melting (LSM) on the amount of retained austenite, hardness and wear resistance of AISI D2 steel was investigated utilizing hardness test, X-ray diffraction (XRD), pin on disk wear ... -
Effect of localized corrosion on welded steel joints
(Masteroppgave/UIS-TN-IKM/2015;, Master thesis, 2015-06-15)With steel structures placed in ever increasing depths in the oil industry, inspection of the structures are increasingly more challenging. Loss of coating on a weld exposes the weld to a corrosive environment, where the ... -
Effect of Lubrication on Friction in Bending under Tension Test-Experimental and Numerical Approach
(Peer reviewed; Journal article, 2020)This paper is aimed to determine the value of coefficient of friction (COF) at the rounded edge of the die in the sheet metal forming operations using the bending under tension (BUT) test. The experimental part of the ... -
Effect of Micro Silica on Alkali Activated Repair Mortar
(Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-14)In this era, concrete acts as a primary role in construction technology. Therefore, it is essential to pay widespread attention to the side effects of concrete products for the environment. On the other hand, the vulnerability ... -
Effect of Pressing Parameters on the Quality of Joint Formation of Heat Exchanger Fins with the Base Plate
(Peer reviewed; Journal article, 2019)In this paper, the results of experimental and numerical studies on joining the thin fins to the thick base plate of a heat exchanger are presented. The elements of the heat exchanger were joined by using developed method ... -
Effect of SiO2 and SiO2/TiO2 hybrid nanoparticles on cementitious materials
(Peer reviewed; Journal article, 2021)In this paper, we report the effect of SiO2 nanoparticle solution on the properties of the neat industry and environmental cements. Moreover, the hybrid SiO2/TiO2 nanoparticles solution impact on the Portland G-class cement. ...