Browsing Studentoppgaver (TN-IKM / TN-IMBM) by Author "Samarakoon, Samindi"
Now showing items 1-20 of 37
-
A study on effect of tendon layouts in post-tensioned flat slabs
Hodne, Bjarte (Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)The use of post-tensioned flat slabs is sufficient when large spans or thin floors are desired. The most used system today is to place unbonded tendons concentrated over the supports in one direction and distribute them ... -
Adaptation of circular economy concept into building design process
Barahona Diaz, Jose Elias (Master thesis, 2021)Circular economy (CE) is an economic system that is restorative and regenerative by design and aims to keep products, components, and materials at their highest utility and value always, distinguishing between technical ... -
Algorithms-Aided Design utilized in Structural Design
Sagvåg Birkemo, Anders (Master thesis, 2021)For long, productivity within the construction industry has comparatively fallen in contrast to its sister engineering fields(Teicholz 2004). Structural engineers, which are tasked with producing precise and reliable ... -
Analyse av armeringsbehov for tre-spenns platebru i betong med varierende spennlengder
Aronsen, Morten (Masteroppgave/UIS-TN-IMBM/2018;, Master thesis, 2018-06)I oppgaven studeres slakkarmerte platebruer med tre spenn. Formålet med oppgaven er å vurdere armeringsbehov i bruplaten ved varierende spennlengder. Bruene har en bredde på 9 m og er begrenset til en ratio på 0,8 mellom ... -
Analyse av varierende spennlengde for ettspenns platebruer
Hjorteland, Elisabet Sedberg (Masteroppgave/UIS-TN-IKM/2017;, Master thesis, 2017-12)Statens vegvesen skal utvikle en ny håndbok for plassproduserte platebruer basert på Eurokoder og håndbøkene fra Statens vegvesen. For å utvikle den nye håndboken må det utarbeides et grunnlag og finne nødvendige begrensninger. ... -
Analysis of post-tensioned concrete bridge constructed using incremental launching method
Greve, Stina Selstø (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)The aim of this thesis is to gain a broader understanding of bridge construction methods and to analyse a bridge constructed in stages. To do so, a model is created for analyses in the frame software NovaFrame. The ... -
Assessment of moisture damage in domestic buildings in Norway
Idsø, Katrine (Bachelor thesis, 2021) -
Bedømmelse av gjenbruksalternativer for betongelementer
Delphin-Solli, Bror Håkon; Ebbesvik, Niklas (Master thesis, 2023)This master´s thesis focuses on studying the possibilities of reusing existing concrete elements and the associated challenges. To address this, the thesis has developed a framework with the purpose of facilitating reuse ... -
Bedømmelse av gjenbruksmuligheter for betongelementer
Ebbesvik, Niklas; Delphin-Solli, Bror Håkon (Master thesis, 2023)This master´s thesis focuses on studying the possibilities of reusing existing concrete elements and the associated challenges. To address this, the thesis has developed a framework with the purpose of facilitating reuse ... -
Benefits of using digital tools at the construction site. A case study exploring opportunities and limitation for Veidekke Stavanger
Wiggen, Lars Kalberg (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-07-25)The construction industry is behind the other industries in mainland Norway in terms of productivity and the use of digital tools. Veidekke wants to become in the forefront when it comes to using digital tools and ... -
Byggskader i bygningsdeler på bolighus i Stavanger og Sandnes kommune.
Chemak, Karvan (Bachelor thesis, 2021)1. Sammendrag En undesøkelse fra Statistisk sentralbyrå (SSB) viser at det ble registrert byggefeil på boliger opptil 20 milliarder kroner hvert år kun i Norge. Det er ofte fuktskader, lekkasjer og feil detaljutførelse ... -
Comparison of different design guidelines for steel fibre reinforced concrete (SFRC) structures
Tunge, Kristian Goa (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)One of the main reasons for the limited use of steel fibre reinforced concrete (SFRC) in load-carrying structures today is the lack of accepted design guidelines. The Norwegian Concrete Association (Norsk Betongforening) ... -
Concrete fatigue of onshore wind turbine foundations
Børsheim, Håkon (Masteroppgave/UIS-TN-IMBM/2020;, Master thesis, 2020-06-15)Climate challenges have led to greater focus on renewable energy sources and the development of wind turbines has become increasingly popular. There are both advantages and disadvantages with the use of wind turbines. The ... -
Damages in hollow core floor systems due to deflection of supporting beam and recommended solutions to control damage.
Eide, Anette Vårvik (Master thesis, 2021)Hollow core slabs (HCS) are pre-stressed concrete elements, normally supported by steel or reinforced concrete/pre-stressed concrete beams. Studies have shown that the deflection of the supporting beam may be the reason ... -
Design of Røydalen Bridge considering both linear and non-linear material and geometric behaviour
Rimestad, Glenn Severin (Master thesis, 2021)Traditional design of reinforced concrete structures is based on the assumption of linear elastic behaviour of concrete and steel, even though the materials behaviour rarely is linear in reality. This thesis compares the ... -
Effektivisering av byggeprosesser ved bruk av digital armering i tegningsfrie prosjekter
Halsnøy, Henrik (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06)I dagens byggenæring er bruk av 2D-tegninger på byggeplass dypt forankret. I tillegg til å produsere 3D-modell av prosjekter, krever entreprenører å få levert snitt-, detalj- og plantegninger i papirformat. Selv om det ... -
Eksperimentell undersøkelse av rissavstand
Runshaug, Alexander; Litlekalsøy, Jarle (Bachelor thesis, 2021)Cracks in concrete structures have an effect on both the durability and the visuals of the structure. Therefore, it is important to control the cracks in reinforced concrete structures. This thesis address the difference ... -
Eksperimentell undersøkelse av rissavstand
Litlekalsøy, Jarle Smeland; Runshaug, Alexander (Bachelor thesis, 2021)Cracks in concrete structures have an effect on both the durability and the visuals of the structure. Therefore, it is important to control the cracks in reinforced concrete structures. This thesis address the difference ... -
Flexural behavior of cracked reinforced concrete beams with externally bonded CFRP plates
Graneland, Elin (Master thesis, 2021)The purpose of this thesis is to perform an experimental study of the flexural behavior of damaged reinforced concrete beams strengthened with externally bonded Carbon Fiber Reinforced Polymer (CFRP) plates. Damage have ... -
Implementation of Lean and Last Planner System® in the construction industry in Norway
Gjerde, Marit Ragnhild Dahl (Masteroppgave/UIS-TN-IMBM/2019;, Master thesis, 2019-06-13)Construction industry has been relatively less productive compared to the manufacturing industry in mainland Norway. In order to improve the productivity in the construction industry the industry must change. The traditional ...